[PATCH] ARM: dts: vf610-zii-scu4-aib: Use generic names for DT nodes

[Andrey Smirnov]

The devicetree specification recommends using generic node names.

Some ZII dts files already follow such recommendation, but some don't,
so use generic node names for consistency among the ZII dts files.

Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
Cc: Shawn Guo <shawnguo@xxxxxxxxxx>
Cc: Chris Healy <cphealy@xxxxxxxxx>
Cc: Cory Tusar <cory.tusar@xxxxxxxx>
Cc: Fabio Estevam <festevam@xxxxxxxxx>
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
---
 arch/arm/boot/dts/vf610-zii-scu4-aib.dts | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
index 45a978defbdc..6edd682dbd29 100644
--- a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
+++ b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
@@ -417,7 +417,7 @@
 	pinctrl-0 = <&pinctrl_dspi1>;
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
@@ -430,7 +430,7 @@
 		};
 	};
 
-	spi-flash@1 {
+	flash@1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
@@ -519,7 +519,7 @@
 		#gpio-cells = <2>;
 	};
 
-	lm75@48 {
+	temp-sensor@48 {
 		compatible = "national,lm75";
 		reg = <0x48>;
 	};
@@ -534,7 +534,7 @@
 		reg = <0x52>;
 	};
 
-	ds1682@6b {
+	elapsed-time-recorder@6b {
 		compatible = "dallas,ds1682";
 		reg = <0x6b>;
 	};
@@ -551,7 +551,7 @@
 		reg = <0x38>;
 	};
 
-	adt7411@4a {
+	adc@4a {
 		compatible = "adi,adt7411";
 		reg = <0x4a>;
 	};
@@ -563,7 +563,7 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	gpio9: sx1503q@20 {
+	gpio9: io-expander@20 {
 		compatible = "semtech,sx1503q";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_sx1503_20>;
@@ -574,12 +574,12 @@
 		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
 	};
 
-	lm75@4e {
+	temp-sensor@4e {
 		compatible = "national,lm75";
 		reg = <0x4e>;
 	};
 
-	lm75@4f {
+	temp-sensor@4f {
 		compatible = "national,lm75";
 		reg = <0x4f>;
 	};
@@ -591,17 +591,17 @@
 		reg = <0x23>;
 	};
 
-	adt7411@4a {
+	adc@4a {
 		compatible = "adi,adt7411";
 		reg = <0x4a>;
 	};
 
-	at24c08@54 {
+	eeprom@54 {
 		compatible = "atmel,24c08";
 		reg = <0x54>;
 	};
 
-	tca9548@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		pinctrl-names = "default";
 		#address-cells = <1>;
@@ -639,7 +639,7 @@
 		};
 	};
 
-	tca9548@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9548";
 		pinctrl-names = "default";
 		reg = <0x71>;
-- 
2.21.0