[GIT PULL] SCSI fixes for 5.3-rc5

From: James Bottomley
Date: Sat Aug 24 2019 - 05:23:59 EST


Four fixes, three for edge conditions which don't occur very often.
The lpfc fix mitigates memory exhaustion for some high CPU systems.

The patch is available here:

git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-fixes

The short changelog is:

Adrian Hunter (1):
scsi: ufs: Fix NULL pointer dereference in ufshcd_config_vreg_hpm()

Bill Kuzeja (1):
scsi: qla2xxx: Fix gnl.l memory leak on adapter init failure

Dmitry Fomichev (1):
scsi: target: tcmu: avoid use-after-free after command timeout

James Smart (1):
scsi: lpfc: Mitigate high memory pre-allocation by SCSI-MQ

and the diffstat:

drivers/scsi/lpfc/lpfc.h | 1 +
drivers/scsi/lpfc/lpfc_attr.c | 15 +++++++++++++++
drivers/scsi/lpfc/lpfc_init.c | 10 ++++++----
drivers/scsi/lpfc/lpfc_sli4.h | 5 +++++
drivers/scsi/qla2xxx/qla_attr.c | 2 ++
drivers/scsi/qla2xxx/qla_os.c | 11 ++++++++++-
drivers/scsi/ufs/ufshcd.c | 3 +++
drivers/target/target_core_user.c | 9 +++++++--
8 files changed, 49 insertions(+), 7 deletions(-)

With full diff below.

James

---

diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 2c3bb8a966e5..bade2e025ecf 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -824,6 +824,7 @@ struct lpfc_hba {
uint32_t cfg_cq_poll_threshold;
uint32_t cfg_cq_max_proc_limit;
uint32_t cfg_fcp_cpu_map;
+ uint32_t cfg_fcp_mq_threshold;
uint32_t cfg_hdw_queue;
uint32_t cfg_irq_chann;
uint32_t cfg_suppress_rsp;
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index ea62322ffe2b..8d8c495b5b60 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -5708,6 +5708,19 @@ LPFC_ATTR_RW(nvme_oas, 0, 0, 1,
LPFC_ATTR_RW(nvme_embed_cmd, 1, 0, 2,
"Embed NVME Command in WQE");

+/*
+ * lpfc_fcp_mq_threshold: Set the maximum number of Hardware Queues
+ * the driver will advertise it supports to the SCSI layer.
+ *
+ * 0 = Set nr_hw_queues by the number of CPUs or HW queues.
+ * 1,128 = Manually specify the maximum nr_hw_queue value to be set,
+ *
+ * Value range is [0,128]. Default value is 8.
+ */
+LPFC_ATTR_R(fcp_mq_threshold, LPFC_FCP_MQ_THRESHOLD_DEF,
+ LPFC_FCP_MQ_THRESHOLD_MIN, LPFC_FCP_MQ_THRESHOLD_MAX,
+ "Set the number of SCSI Queues advertised");
+
/*
* lpfc_hdw_queue: Set the number of Hardware Queues the driver
* will advertise it supports to the NVME and SCSI layers. This also
@@ -6030,6 +6043,7 @@ struct device_attribute *lpfc_hba_attrs[] = {
&dev_attr_lpfc_cq_poll_threshold,
&dev_attr_lpfc_cq_max_proc_limit,
&dev_attr_lpfc_fcp_cpu_map,
+ &dev_attr_lpfc_fcp_mq_threshold,
&dev_attr_lpfc_hdw_queue,
&dev_attr_lpfc_irq_chann,
&dev_attr_lpfc_suppress_rsp,
@@ -7112,6 +7126,7 @@ lpfc_get_cfgparam(struct lpfc_hba *phba)
/* Initialize first burst. Target vs Initiator are different. */
lpfc_nvme_enable_fb_init(phba, lpfc_nvme_enable_fb);
lpfc_nvmet_fb_size_init(phba, lpfc_nvmet_fb_size);
+ lpfc_fcp_mq_threshold_init(phba, lpfc_fcp_mq_threshold);
lpfc_hdw_queue_init(phba, lpfc_hdw_queue);
lpfc_irq_chann_init(phba, lpfc_irq_chann);
lpfc_enable_bbcr_init(phba, lpfc_enable_bbcr);
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index a7549ae32542..1ac98becb5ba 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -4309,10 +4309,12 @@ lpfc_create_port(struct lpfc_hba *phba, int instance, struct device *dev)
shost->max_cmd_len = 16;

if (phba->sli_rev == LPFC_SLI_REV4) {
- if (phba->cfg_fcp_io_sched == LPFC_FCP_SCHED_BY_HDWQ)
- shost->nr_hw_queues = phba->cfg_hdw_queue;
- else
- shost->nr_hw_queues = phba->sli4_hba.num_present_cpu;
+ if (!phba->cfg_fcp_mq_threshold ||
+ phba->cfg_fcp_mq_threshold > phba->cfg_hdw_queue)
+ phba->cfg_fcp_mq_threshold = phba->cfg_hdw_queue;
+
+ shost->nr_hw_queues = min_t(int, 2 * num_possible_nodes(),
+ phba->cfg_fcp_mq_threshold);

shost->dma_boundary =
phba->sli4_hba.pc_sli4_params.sge_supp_len-1;
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index 3aeca387b22a..329f7aa7e169 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -44,6 +44,11 @@
#define LPFC_HBA_HDWQ_MAX 128
#define LPFC_HBA_HDWQ_DEF 0

+/* FCP MQ queue count limiting */
+#define LPFC_FCP_MQ_THRESHOLD_MIN 0
+#define LPFC_FCP_MQ_THRESHOLD_MAX 128
+#define LPFC_FCP_MQ_THRESHOLD_DEF 8
+
/* Common buffer size to accomidate SCSI and NVME IO buffers */
#define LPFC_COMMON_IO_BUF_SZ 768

diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 8d560c562e9c..6b7b390b2e52 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -2956,6 +2956,8 @@ qla24xx_vport_delete(struct fc_vport *fc_vport)
dma_free_coherent(&ha->pdev->dev, vha->gnl.size, vha->gnl.l,
vha->gnl.ldma);

+ vha->gnl.l = NULL;
+
vfree(vha->scan.l);

if (vha->qpair && vha->qpair->vp_idx == vha->vp_idx) {
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 2e58cff9d200..98e60a34afd9 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -3440,6 +3440,12 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
return 0;

probe_failed:
+ if (base_vha->gnl.l) {
+ dma_free_coherent(&ha->pdev->dev, base_vha->gnl.size,
+ base_vha->gnl.l, base_vha->gnl.ldma);
+ base_vha->gnl.l = NULL;
+ }
+
if (base_vha->timer_active)
qla2x00_stop_timer(base_vha);
base_vha->flags.online = 0;
@@ -3673,7 +3679,7 @@ qla2x00_remove_one(struct pci_dev *pdev)
if (!atomic_read(&pdev->enable_cnt)) {
dma_free_coherent(&ha->pdev->dev, base_vha->gnl.size,
base_vha->gnl.l, base_vha->gnl.ldma);
-
+ base_vha->gnl.l = NULL;
scsi_host_put(base_vha->host);
kfree(ha);
pci_set_drvdata(pdev, NULL);
@@ -3713,6 +3719,8 @@ qla2x00_remove_one(struct pci_dev *pdev)
dma_free_coherent(&ha->pdev->dev,
base_vha->gnl.size, base_vha->gnl.l, base_vha->gnl.ldma);

+ base_vha->gnl.l = NULL;
+
vfree(base_vha->scan.l);

if (IS_QLAFX00(ha))
@@ -4816,6 +4824,7 @@ struct scsi_qla_host *qla2x00_create_host(struct scsi_host_template *sht,
"Alloc failed for scan database.\n");
dma_free_coherent(&ha->pdev->dev, vha->gnl.size,
vha->gnl.l, vha->gnl.ldma);
+ vha->gnl.l = NULL;
scsi_remove_host(vha->host);
return NULL;
}
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index e274053109d0..029da74bb2f5 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -7062,6 +7062,9 @@ static inline int ufshcd_config_vreg_lpm(struct ufs_hba *hba,
static inline int ufshcd_config_vreg_hpm(struct ufs_hba *hba,
struct ufs_vreg *vreg)
{
+ if (!vreg)
+ return 0;
+
return ufshcd_config_vreg_load(hba->dev, vreg, vreg->max_uA);
}

diff --git a/drivers/target/target_core_user.c b/drivers/target/target_core_user.c
index 04eda111920e..661bb9358364 100644
--- a/drivers/target/target_core_user.c
+++ b/drivers/target/target_core_user.c
@@ -1132,14 +1132,16 @@ static void tcmu_handle_completion(struct tcmu_cmd *cmd, struct tcmu_cmd_entry *
struct se_cmd *se_cmd = cmd->se_cmd;
struct tcmu_dev *udev = cmd->tcmu_dev;
bool read_len_valid = false;
- uint32_t read_len = se_cmd->data_length;
+ uint32_t read_len;

/*
* cmd has been completed already from timeout, just reclaim
* data area space and free cmd
*/
- if (test_bit(TCMU_CMD_BIT_EXPIRED, &cmd->flags))
+ if (test_bit(TCMU_CMD_BIT_EXPIRED, &cmd->flags)) {
+ WARN_ON_ONCE(se_cmd);
goto out;
+ }

list_del_init(&cmd->queue_entry);

@@ -1152,6 +1154,7 @@ static void tcmu_handle_completion(struct tcmu_cmd *cmd, struct tcmu_cmd_entry *
goto done;
}

+ read_len = se_cmd->data_length;
if (se_cmd->data_direction == DMA_FROM_DEVICE &&
(entry->hdr.uflags & TCMU_UFLAG_READ_LEN) && entry->rsp.read_len) {
read_len_valid = true;
@@ -1307,6 +1310,7 @@ static int tcmu_check_expired_cmd(int id, void *p, void *data)
*/
scsi_status = SAM_STAT_CHECK_CONDITION;
list_del_init(&cmd->queue_entry);
+ cmd->se_cmd = NULL;
} else {
list_del_init(&cmd->queue_entry);
idr_remove(&udev->commands, id);
@@ -2022,6 +2026,7 @@ static void tcmu_reset_ring(struct tcmu_dev *udev, u8 err_level)

idr_remove(&udev->commands, i);
if (!test_bit(TCMU_CMD_BIT_EXPIRED, &cmd->flags)) {
+ WARN_ON(!cmd->se_cmd);
list_del_init(&cmd->queue_entry);
if (err_level == 1) {
/*