Re: [PATCH v3 4/4] dt-bindings: iio: adc: Add AD7606B ADC documentation

[Jonathan Cameron]

On Wed, 21 Aug 2019 17:16:56 +0300
Beniamin Bia <beniamin.bia@xxxxxxxxxx> wrote:

> Documentation for AD7606B Analog to Digital Converter and software
> mode was added.
> 
> Signed-off-by: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
Tweaked as per Peter's comment and added Rob's Reviewed-by from v2
Seems everyone decided to review this one just as you were posting
the new version ;)

Jonathan

> ---
> Changes in v3:
> -nothing changed
> 
>  Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
> index 509dbe9c84d2..2afe31747a70 100644
> --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
> @@ -13,6 +13,7 @@ maintainers:
>  description: |
>    Analog Devices AD7606 Simultaneous Sampling ADC
>    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7606_7606-6_7606-4.pdf
> +  https://www.analog.com/media/en/technical-documentation/data-sheets/AD7606B.pdf
>    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7616.pdf
>  
>  properties:
> @@ -22,6 +23,7 @@ properties:
>        - adi,ad7606-8
>        - adi,ad7606-6
>        - adi,ad7606-4
> +      - adi,ad7606b
>        - adi,ad7616
>  
>    reg:
> @@ -87,7 +89,7 @@ properties:
>  
>    adi,sw-mode:
>      description:
> -      Software mode of operation, so far available only for ad7616.
> +      Software mode of operation, so far available only for ad7616 and ad7606B.
>        It is enabled when all three oversampling mode pins are connected to
>        high level. The device is configured by the corresponding registers. If the
>        adi,oversampling-ratio-gpios property is defined, then the driver will set the