Re: [PATCH v3 00/15] Improvements and fixes for mxsfb DRM driver

[Stefan Agner]

On 2019-08-26 14:05, Guido GÃnther wrote:
> Hi,
> On Wed, Aug 21, 2019 at 01:15:40PM +0300, Robert Chiras wrote:
>> This patch-set improves the use of eLCDIF block on iMX 8 SoCs (like 8MQ, 8MM
>> and 8QXP). Following, are the new features added and fixes from this
>> patch-set:
> 
> I've applied this whole series on top of my NWL work and it looks good
> with a DSI panel. Applying the whole series also fixes an issue where
> after unblank the output was sometimes shifted about half a screen width
> to the right (which didn't happen with DCSS). So at least from the parts
> I could test:
> 
>   Tested-by: Guido GÃnther <agx@xxxxxxxxxxx> 
> 
> for the whole thing.

Thanks for testing! What SoC did you use? I think it would be good to
also give this a try on i.MX 7 or i.MX 6ULL before merging.

--
Stefan


> Cheers,
>  -- Guido
>>
>> 1. Add support for drm_bridge
>> On 8MQ and 8MM, the LCDIF block is not directly connected to a parallel
>> display connector, where an LCD panel can be attached, but instead it is
>> connected to DSI controller. Since this DSI stands between the display
>> controller (eLCDIF) and the physical connector, the DSI can be implemented
>> as a DRM bridge. So, in order to be able to connect the mxsfb driver to
>> the DSI driver, the support for a drm_bridge was needed in mxsfb DRM
>> driver (the actual driver for the eLCDIF block).
>>
>> 2. Add support for additional pixel formats
>> Some of the pixel formats needed by Android were not implemented in this
>> driver, but they were actually supported. So, add support for them.
>>
>> 3. Add support for horizontal stride
>> Having support for horizontal stride allows the use of eLCDIF with a GPU
>> (for example) that can only output resolution sizes multiple of a power of
>> 8. For example, 1080 is not a power of 16, so in order to support 1920x1080
>> output from GPUs that can produce linear buffers only in sizes multiple to 16,
>> this feature is needed.
>>
>> 3. Few minor features and bug-fixing
>> The addition of max-res DT property was actually needed in order to limit
>> the bandwidth usage of the eLCDIF block. This is need on systems where
>> multiple display controllers are presend and the memory bandwidth is not
>> enough to handle all of them at maximum capacity (like it is the case on
>> 8MQ, where there are two display controllers: DCSS and eLCDIF).
>> The rest of the patches are bug-fixes.
>>
>> v3:
>> - Removed the max-res property patches and added support for
>>   max-memory-bandwidth property, as it is also implemented in other drivers
>> - Removed unnecessary drm_vblank_off in probe
>>
>> v2:
>> - Collected Tested-by from Guido
>> - Split the first patch, which added more than one feature into relevant
>>   patches, explaining each feature added
>> - Also split the second patch into more patches, to differentiate between
>>   the feature itself (additional pixel formats support) and the cleanup
>>   of the register definitions for a better representation (guido)
>> - Included a patch submitted by Guido, while he was testing my patch-set
>>
>> Guido GÃnther (1):
>>   drm/mxsfb: Read bus flags from bridge if present
>>
>> Mirela Rabulea (1):
>>   drm/mxsfb: Signal mode changed when bpp changed
>>
>> Robert Chiras (13):
>>   drm/mxsfb: Update mxsfb to support a bridge
>>   drm/mxsfb: Add defines for the rest of registers
>>   drm/mxsfb: Reset vital registers for a proper initialization
>>   drm/mxsfb: Update register definitions using bit manipulation defines
>>   drm/mxsfb: Update mxsfb with additional pixel formats
>>   drm/mxsfb: Fix the vblank events
>>   drm/mxsfb: Add max-memory-bandwidth property for MXSFB
>>   dt-bindings: display: Add max-memory-bandwidth property for mxsfb
>>   drm/mxsfb: Update mxsfb to support LCD reset
>>   drm/mxsfb: Improve the axi clock usage
>>   drm/mxsfb: Clear OUTSTANDING_REQS bits
>>   drm/mxsfb: Add support for horizontal stride
>>   drm/mxsfb: Add support for live pixel format change
>>
>>  .../devicetree/bindings/display/mxsfb.txt          |   5 +
>>  drivers/gpu/drm/mxsfb/mxsfb_crtc.c                 | 287 ++++++++++++++++++---
>>  drivers/gpu/drm/mxsfb/mxsfb_drv.c                  | 203 +++++++++++++--
>>  drivers/gpu/drm/mxsfb/mxsfb_drv.h                  |  12 +-
>>  drivers/gpu/drm/mxsfb/mxsfb_out.c                  |  26 +-
>>  drivers/gpu/drm/mxsfb/mxsfb_regs.h                 | 193 +++++++++-----
>>  6 files changed, 589 insertions(+), 137 deletions(-)
>>
>> --
>> 2.7.4
>>