[PATCH 01/12] ARM: dts: imx7d: cl-som-imx7 imx7d-sbc-imx7: move USB

From: Andrà Draszik
Date: Mon Aug 26 2019 - 11:38:47 EST


Whether and which USB port is enabled and how they
are powered is a function of the carrier board, not
of the SoM. Different carrier boards can have different
ports enabled / wired up, and power them differently;
so this should really move into the respective DTS.

Do so and update the USB power supply to reflect
the actual situation on the sbc-imx7 carrier board.

Signed-off-by: Andrà Draszik <git@xxxxxxxxxx>
Cc: Ilya Ledvich <ilya@xxxxxxxxxxxxxx>
Cc: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
Cc: Shawn Guo <shawnguo@xxxxxxxxxx>
Cc: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Cc: Pengutronix Kernel Team <kernel@xxxxxxxxxxxxxx>
Cc: Fabio Estevam <festevam@xxxxxxxxx>
Cc: NXP Linux Team <linux-imx@xxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
---
arch/arm/boot/dts/imx7d-cl-som-imx7.dts | 24 ------------------------
arch/arm/boot/dts/imx7d-sbc-imx7.dts | 13 +++++++++++++
2 files changed, 13 insertions(+), 24 deletions(-)

diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
index 62d5e9a4a781..6f7e85cf0c28 100644
--- a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
+++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
@@ -22,15 +22,6 @@
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB - minimal configuration */
};
-
- reg_usb_otg1_vbus: regulator-vbus {
- compatible = "regulator-fixed";
- regulator-name = "usb_otg1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
};

&cpu0 {
@@ -193,13 +184,6 @@
status = "okay";
};

-&usbotg1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbotg1>;
- vbus-supply = <&reg_usb_otg1_vbus>;
- status = "okay";
-};
-
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
@@ -278,11 +262,3 @@
>;
};
};
-
-&iomuxc_lpsr {
- pinctrl_usbotg1: usbotg1grp {
- fsl,pins = <
- MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x14 /* OTG PWREN */
- >;
- };
-};
diff --git a/arch/arm/boot/dts/imx7d-sbc-imx7.dts b/arch/arm/boot/dts/imx7d-sbc-imx7.dts
index f8a868552707..aab646903de3 100644
--- a/arch/arm/boot/dts/imx7d-sbc-imx7.dts
+++ b/arch/arm/boot/dts/imx7d-sbc-imx7.dts
@@ -15,6 +15,14 @@
/ {
model = "CompuLab SBC-iMX7";
compatible = "compulab,sbc-imx7", "compulab,cl-som-imx7", "fsl,imx7d";
+
+ reg_usb_vbus: regulator-usb-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
};

&usdhc1 {
@@ -26,6 +34,11 @@
status = "okay";
};

+&&usbotg1 {
+ vbus-supply = <&reg_usb_vbus>;
+ status = "okay";
+};
+
&iomuxc {
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
--
2.23.0.rc1