Re: [RESEND PATCH v3 07/20] mtd: spi_nor: Move manufacturer quad_enable() in ->default_init()

[Vignesh Raghavendra]

On 26/08/19 5:38 PM, Tudor.Ambarus@xxxxxxxxxxxxx wrote:
> From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>
> 
> The goal is to move the quad_enable manufacturer specific init in the
> nor->manufacturer->fixups->default_init()
> 
> The legacy quad_enable() implementation is spansion_quad_enable(),
> select this method by default.
> 
> Set specific manufacturer fixups->default_init() hooks to overwrite
> the default quad_enable() implementation when needed.
> 
> Signed-off-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>
> Reviewed-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
> ---


Reviewed-by: Vignesh Raghavendra <vigneshr@xxxxxx>

Regards
Vignesh


> v3: collect R-b
> 
>  drivers/mtd/spi-nor/spi-nor.c | 48 ++++++++++++++++++++++++++-----------------
>  1 file changed, 29 insertions(+), 19 deletions(-)
> 
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> index 3dbbfe34d1d2..2a239531704a 100644
> --- a/drivers/mtd/spi-nor/spi-nor.c
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -4150,13 +4150,38 @@ static int spi_nor_parse_sfdp(struct spi_nor *nor,
>  	return err;
>  }
>  
> +static void macronix_set_default_init(struct spi_nor *nor)
> +{
> +	nor->params.quad_enable = macronix_quad_enable;
> +}
> +
> +static void st_micron_set_default_init(struct spi_nor *nor)
> +{
> +	nor->params.quad_enable = NULL;
> +}
> +
>  /**
>   * spi_nor_manufacturer_init_params() - Initialize the flash's parameters and
> - * settings based on ->default_init() hook.
> + * settings based on MFR register and ->default_init() hook.
>   * @nor:	pointer to a 'struct spi-nor'.
>   */
>  static void spi_nor_manufacturer_init_params(struct spi_nor *nor)
>  {
> +	/* Init flash parameters based on MFR */
> +	switch (JEDEC_MFR(nor->info)) {
> +	case SNOR_MFR_MACRONIX:
> +		macronix_set_default_init(nor);
> +		break;
> +
> +	case SNOR_MFR_ST:
> +	case SNOR_MFR_MICRON:
> +		st_micron_set_default_init(nor);
> +		break;
> +
> +	default:
> +		break;
> +	}
> +
>  	if (nor->info->fixups && nor->info->fixups->default_init)
>  		nor->info->fixups->default_init(nor);
>  }
> @@ -4168,6 +4193,9 @@ static int spi_nor_init_params(struct spi_nor *nor)
>  	const struct flash_info *info = nor->info;
>  	u8 i, erase_mask;
>  
> +	/* Initialize legacy flash parameters and settings. */
> +	params->quad_enable = spansion_quad_enable;
> +
>  	/* Set SPI NOR sizes. */
>  	params->size = (u64)info->sector_size * info->n_sectors;
>  	params->page_size = info->page_size;
> @@ -4233,24 +4261,6 @@ static int spi_nor_init_params(struct spi_nor *nor)
>  			       SPINOR_OP_SE);
>  	spi_nor_init_uniform_erase_map(map, erase_mask, params->size);
>  
> -	/* Select the procedure to set the Quad Enable bit. */
> -	if (params->hwcaps.mask & (SNOR_HWCAPS_READ_QUAD |
> -				   SNOR_HWCAPS_PP_QUAD)) {
> -		switch (JEDEC_MFR(info)) {
> -		case SNOR_MFR_MACRONIX:
> -			params->quad_enable = macronix_quad_enable;
> -			break;
> -
> -		case SNOR_MFR_ST:
> -		case SNOR_MFR_MICRON:
> -			break;
> -
> -		default:
> -			/* Kept only for backward compatibility purpose. */
> -			params->quad_enable = spansion_quad_enable;
> -			break;
> -		}
> -	}
>  
>  	spi_nor_manufacturer_init_params(nor);
>  
> 

-- 
Regards
Vignesh