Re: [PATCH] bcma: fix incorrect update of BCMA_CORE_PCI_MDIO_DATA

From: Colin Ian King
Date: Tue Aug 27 2019 - 03:58:43 EST


On 22/08/2019 17:38, Larry Finger wrote:
> On 8/22/19 11:11 AM, Colin Ian King wrote:
>> On 22/08/2019 17:03, Larry Finger wrote:
>>> On 8/22/19 8:35 AM, Colin King wrote:
>>>> From: Colin Ian King <colin.king@xxxxxxxxxxxxx>
>>>>
>>>> An earlier commit re-worked the setting of the bitmask and is now
>>>> assigning v with some bit flags rather than bitwise or-ing them
>>>> into v, consequently the earlier bit-settings of v are being lost.
>>>> Fix this by replacing an assignment with the bitwise or instead.
>>>>
>>>> Addresses-Coverity: ("Unused value")
>>>> Fixes: 2be25cac8402 ("bcma: add constants for PCI and use them")
>>>> Signed-off-by: Colin Ian King <colin.king@xxxxxxxxxxxxx>
>>>> ---
>>>> ÂÂ drivers/bcma/driver_pci.c | 2 +-
>>>> ÂÂ 1 file changed, 1 insertion(+), 1 deletion(-)
>>>>
>>>> diff --git a/drivers/bcma/driver_pci.c b/drivers/bcma/driver_pci.c
>>>> index f499a469e66d..d219ee947c07 100644
>>>> --- a/drivers/bcma/driver_pci.c
>>>> +++ b/drivers/bcma/driver_pci.c
>>>> @@ -78,7 +78,7 @@ static u16 bcma_pcie_mdio_read(struct bcma_drv_pci
>>>> *pc, u16 device, u8 address)
>>>> ÂÂÂÂÂÂÂÂÂÂ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD);
>>>> ÂÂÂÂÂÂ }
>>>> ÂÂ -ÂÂÂ v = BCMA_CORE_PCI_MDIODATA_START;
>>>> +ÂÂÂ v |= BCMA_CORE_PCI_MDIODATA_START;
>>>> ÂÂÂÂÂÂ v |= BCMA_CORE_PCI_MDIODATA_READ;
>>>> ÂÂÂÂÂÂ v |= BCMA_CORE_PCI_MDIODATA_TA;
>>>
>>> I'm not sure the "Fixes" attribute is correct.
>>>
>>> The changes for this section in commit 2be25cac8402 are
>>>
>>> -ÂÂÂÂÂÂ v = (1 << 30); /* Start of Transaction */
>>> -ÂÂÂÂÂÂ v |= (1 << 28); /* Write Transaction */
>>> -ÂÂÂÂÂÂ v |= (1 << 17); /* Turnaround */
>>> -ÂÂÂÂÂÂ v |= (0x1F << 18);
>>> +ÂÂÂÂÂÂ v = BCMA_CORE_PCI_MDIODATA_START;
>>> +ÂÂÂÂÂÂ v |= BCMA_CORE_PCI_MDIODATA_WRITE;
>>> +ÂÂÂÂÂÂ v |= (BCMA_CORE_PCI_MDIODATA_DEV_ADDR <<
>>> +ÂÂÂÂÂÂÂÂÂÂÂÂ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF);
>>> +ÂÂÂÂÂÂ v |= (BCMA_CORE_PCI_MDIODATA_BLK_ADDR <<
>>> +ÂÂÂÂÂÂÂÂÂÂÂÂ BCMA_CORE_PCI_MDIODATA_REGADDR_SHF);
>>> +ÂÂÂÂÂÂ v |= BCMA_CORE_PCI_MDIODATA_TA;
>>>
>>> Because the code has done quite a bit of work on v just above this
>>> section, I agree that this is likely an error, but that error happened
>>> in an earlier commit. Thus 2be25cac8402 did not introduce the error,
>>> merely copied it.

I did a second look at Larry's comments above and realized the code he
is referring to is in bcma_pcie_mdio_set_phy which is OK

Instead, the code I'm fixing is in bcma_pcie_mdio_read, which was broken
by commit 2be25cac8402fab56bb51166f464d1b420bcf744

if (pc->core->id.rev >= 10) {
max_retries = 200;
bcma_pcie_mdio_set_phy(pc, device);
+ v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR <<
+ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF);
+ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF);
+ } else {
+ v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD);
+ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD);
}

- v = (1 << 30); /* Start of Transaction */
- v |= (1 << 29); /* Read Transaction */
- v |= (1 << 17); /* Turnaround */
- if (pc->core->id.rev < 10)
- v |= (u32)device << 22;
- v |= (u32)address << 18;
- pcicore_write32(pc, mdio_data, v);
+ v = BCMA_CORE_PCI_MDIODATA_START;
+ v |= BCMA_CORE_PCI_MDIODATA_READ;
+ v |= BCMA_CORE_PCI_MDIODATA_TA;
+
+ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v);


>>
>> Ugh, this goes back further. I didn't spot that. I'm less confident of
>> what the correct settings should be now.
>>
>>>
>>> Has this change been tested?
>>
>> Afraid not, I don't have the H/W.
>
> I admit that I looked at this only because I found it hard to believe
> that the collective wisdom of the list would have missed the usage of
> "=" instead of "|=". At least that test was passed. :)

Maybe not after all :-)

>
> Larry
>

I'll send a V2 with the write fix, and the same fixes commit sha