RE: [PATCH v4] rtw88: pci: Move a mass of jobs in hw IRQ to soft IRQ

[Tony Chuang]

> From: Jian-Hong Pan 
> Subject: [PATCH v4] rtw88: pci: Move a mass of jobs in hw IRQ to soft IRQ
> 
> There is a mass of jobs between spin lock and unlock in the hardware
> IRQ which will occupy much time originally. To make system work more
> efficiently, this patch moves the jobs to the soft IRQ (bottom half) to
> reduce the time in hardware IRQ.
> 
> Signed-off-by: Jian-Hong Pan <jian-hong@xxxxxxxxxxxx>
> ---
> v2:
>  Change the spin_lock_irqsave/unlock_irqrestore to spin_lock/unlock in
>  rtw_pci_interrupt_handler. Because the interrupts are already disabled
>  in the hardware interrupt handler.
> 
> v3:
>  Extend the spin lock protecting area for the TX path in
>  rtw_pci_interrupt_threadfn by Realtek's suggestion
> 
> v4:
>  Remove the WiFi running check in rtw_pci_interrupt_threadfn to avoid AP
>  connection failed by Realtek's suggestion.
> 
>  drivers/net/wireless/realtek/rtw88/pci.c | 32 +++++++++++++++++++-----
>  1 file changed, 26 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/net/wireless/realtek/rtw88/pci.c
> b/drivers/net/wireless/realtek/rtw88/pci.c
> index 00ef229552d5..955dd6c6fb57 100644
> --- a/drivers/net/wireless/realtek/rtw88/pci.c
> +++ b/drivers/net/wireless/realtek/rtw88/pci.c
> @@ -866,12 +866,29 @@ static irqreturn_t rtw_pci_interrupt_handler(int irq,
> void *dev)
>  {
>  	struct rtw_dev *rtwdev = dev;
>  	struct rtw_pci *rtwpci = (struct rtw_pci *)rtwdev->priv;
> -	u32 irq_status[4];
> 
>  	spin_lock(&rtwpci->irq_lock);
>  	if (!rtwpci->irq_enabled)
>  		goto out;
> 
> +	/* disable RTW PCI interrupt to avoid more interrupts before the end of
> +	 * thread function
> +	 */
> +	rtw_pci_disable_interrupt(rtwdev, rtwpci);
> +out:
> +	spin_unlock(&rtwpci->irq_lock);
> +
> +	return IRQ_WAKE_THREAD;
> +}
> +
> +static irqreturn_t rtw_pci_interrupt_threadfn(int irq, void *dev)
> +{
> +	struct rtw_dev *rtwdev = dev;
> +	struct rtw_pci *rtwpci = (struct rtw_pci *)rtwdev->priv;
> +	unsigned long flags;
> +	u32 irq_status[4];
> +
> +	spin_lock_irqsave(&rtwpci->irq_lock, flags);
>  	rtw_pci_irq_recognized(rtwdev, rtwpci, irq_status);
> 
>  	if (irq_status[0] & IMR_MGNTDOK)
> @@ -891,8 +908,9 @@ static irqreturn_t rtw_pci_interrupt_handler(int irq,
> void *dev)
>  	if (irq_status[0] & IMR_ROK)
>  		rtw_pci_rx_isr(rtwdev, rtwpci, RTW_RX_QUEUE_MPDU);
> 
> -out:
> -	spin_unlock(&rtwpci->irq_lock);
> +	/* all of the jobs for this interrupt have been done */
> +	rtw_pci_enable_interrupt(rtwdev, rtwpci);
> +	spin_unlock_irqrestore(&rtwpci->irq_lock, flags);
> 
>  	return IRQ_HANDLED;
>  }
> @@ -1152,8 +1170,10 @@ static int rtw_pci_probe(struct pci_dev *pdev,
>  		goto err_destroy_pci;
>  	}
> 
> -	ret = request_irq(pdev->irq, &rtw_pci_interrupt_handler,
> -			  IRQF_SHARED, KBUILD_MODNAME, rtwdev);
> +	ret = devm_request_threaded_irq(rtwdev->dev, pdev->irq,
> +					rtw_pci_interrupt_handler,
> +					rtw_pci_interrupt_threadfn,
> +					IRQF_SHARED, KBUILD_MODNAME, rtwdev);
>  	if (ret) {
>  		ieee80211_unregister_hw(hw);
>  		goto err_destroy_pci;
> @@ -1192,7 +1212,7 @@ static void rtw_pci_remove(struct pci_dev *pdev)
>  	rtw_pci_disable_interrupt(rtwdev, rtwpci);
>  	rtw_pci_destroy(rtwdev, pdev);
>  	rtw_pci_declaim(rtwdev, pdev);
> -	free_irq(rtwpci->pdev->irq, rtwdev);
> +	devm_free_irq(rtwdev->dev, rtwpci->pdev->irq, rtwdev);
>  	rtw_core_deinit(rtwdev);
>  	ieee80211_free_hw(hw);
>  }
> --
> 2.20.1


Now it works fine with MSI interrupt enabled.

But this patch is conflicting with MSI interrupt patch.
Is there a better way we can make Kalle apply them more smoothly?
I can rebase them and submit both if you're OK.

Yan-Hsuan