[PATCH 4/4] net: dsa: microchip: avoid hard-codded port count

[Razvan Stefanescu]

Use port_cnt value to disable interrupts on switch reset.

Signed-off-by: Razvan Stefanescu <razvan.stefanescu@xxxxxxxxxxxxx>
---
 drivers/net/dsa/microchip/ksz9477.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index 187be42de5f1..54fc05595d48 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -213,7 +213,7 @@ static int ksz9477_reset_switch(struct ksz_device *dev)
 
 	/* disable interrupts */
 	ksz_write32(dev, REG_SW_INT_MASK__4, SWITCH_INT_MASK);
-	ksz_write32(dev, REG_SW_PORT_INT_MASK__4, 0x7F);
+	ksz_write32(dev, REG_SW_PORT_INT_MASK__4, dev->port_cnt);
 	ksz_read32(dev, REG_SW_PORT_INT_STATUS__4, &data32);
 
 	/* set broadcast storm protection 10% rate */
-- 
2.20.1