Re: [RESEND PATCH 0/5] Add bluetooth support for Orange Pi 3

[Marcel Holtmann]

Hi Maxime,

>>> (Resend to add missing lists, sorry for the noise.)
>>> 
>>> This series implements bluetooth support for Xunlong Orange Pi 3 board.
>>> 
>>> The board uses AP6256 WiFi/BT 5.0 chip.
>>> 
>>> Summary of changes:
>>> 
>>> - add more delay to let initialize the chip
>>> - let the kernel detect firmware file path
>>> - add new compatible and update dt-bindings
>>> - update Orange Pi 3 / H6 DTS
>>> 
>>> Please take a look.
>>> 
>>> thank you and regards,
>>> Ondrej Jirman
>>> 
>>> Ondrej Jirman (5):
>>> dt-bindings: net: Add compatible for BCM4345C5 bluetooth device
>>> bluetooth: bcm: Add support for loading firmware for BCM4345C5
>>> bluetooth: hci_bcm: Give more time to come out of reset
>>> arm64: dts: allwinner: h6: Add pin configs for uart1
>>> arm64: dts: allwinner: orange-pi-3: Enable UART1 / Bluetooth
>>> 
>>> .../bindings/net/broadcom-bluetooth.txt       |  1 +
>>> .../dts/allwinner/sun50i-h6-orangepi-3.dts    | 19 +++++++++++++++++++
>>> arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi  | 10 ++++++++++
>>> drivers/bluetooth/btbcm.c                     |  3 +++
>>> drivers/bluetooth/hci_bcm.c                   |  3 ++-
>>> 5 files changed, 35 insertions(+), 1 deletion(-)
>> 
>> all 5 patches have been applied to bluetooth-next tree.
> 
> The DTS patches (last 2) should go through the arm-soc tree, can you
> drop them?

why is that? We have included DTS changes for Bluetooth devices directly all the time. What is different with this hardware?

Regards

Marcel