[PATCH V2 4/4] crypto: Add Xilinx AES driver

[Kalyani Akula]

This patch adds AES driver support for the Xilinx
ZynqMP SoC.

Signed-off-by: Kalyani Akula <kalyani.akula@xxxxxxxxxx>
---
 drivers/crypto/Kconfig          |  11 ++
 drivers/crypto/Makefile         |   1 +
 drivers/crypto/zynqmp-aes-gcm.c | 297 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 309 insertions(+)
 create mode 100644 drivers/crypto/zynqmp-aes-gcm.c

diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index 603413f..a0d058a 100644
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -677,6 +677,17 @@ config CRYPTO_DEV_ROCKCHIP
 	  This driver interfaces with the hardware crypto accelerator.
 	  Supporting cbc/ecb chainmode, and aes/des/des3_ede cipher mode.
 
+config CRYPTO_DEV_ZYNQMP_AES
+	tristate "Support for Xilinx ZynqMP AES hw accelerator"
+	depends on ARCH_ZYNQMP || COMPILE_TEST
+	select CRYPTO_AES
+	select CRYPTO_SKCIPHER
+	help
+	  Xilinx ZynqMP has AES-GCM engine used for symmetric key
+	  encryption and decryption. This driver interfaces with AES hw
+	  accelerator. Select this if you want to use the ZynqMP module
+	  for AES algorithms.
+
 config CRYPTO_DEV_MEDIATEK
 	tristate "MediaTek's EIP97 Cryptographic Engine driver"
 	depends on (ARM && ARCH_MEDIATEK) || COMPILE_TEST
diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile
index afc4753..c99663a 100644
--- a/drivers/crypto/Makefile
+++ b/drivers/crypto/Makefile
@@ -48,3 +48,4 @@ obj-$(CONFIG_CRYPTO_DEV_BCM_SPU) += bcm/
 obj-$(CONFIG_CRYPTO_DEV_SAFEXCEL) += inside-secure/
 obj-$(CONFIG_CRYPTO_DEV_ARTPEC6) += axis/
 obj-y += hisilicon/
+obj-$(CONFIG_CRYPTO_DEV_ZYNQMP_AES) += zynqmp-aes-gcm.o
diff --git a/drivers/crypto/zynqmp-aes-gcm.c b/drivers/crypto/zynqmp-aes-gcm.c
new file mode 100644
index 0000000..d65f038
--- /dev/null
+++ b/drivers/crypto/zynqmp-aes-gcm.c
@@ -0,0 +1,297 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Xilinx ZynqMP AES Driver.
+ * Copyright (c) 2019 Xilinx Inc.
+ */
+
+#include <crypto/aes.h>
+#include <crypto/scatterwalk.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/scatterlist.h>
+#include <linux/firmware/xlnx-zynqmp.h>
+
+#define ZYNQMP_AES_IV_SIZE			12
+#define ZYNQMP_AES_GCM_SIZE			16
+#define ZYNQMP_AES_KEY_SIZE			32
+
+#define ZYNQMP_AES_DECRYPT			0
+#define ZYNQMP_AES_ENCRYPT			1
+
+#define ZYNQMP_AES_KUP_KEY			0
+#define ZYNQMP_AES_DEVICE_KEY			1
+#define ZYNQMP_AES_PUF_KEY			2
+
+#define ZYNQMP_AES_GCM_TAG_MISMATCH_ERR		0x01
+#define ZYNQMP_AES_SIZE_ERR			0x06
+#define ZYNQMP_AES_WRONG_KEY_SRC_ERR		0x13
+#define ZYNQMP_AES_PUF_NOT_PROGRAMMED		0xE300
+
+#define ZYNQMP_AES_BLOCKSIZE			0x04
+
+static const struct zynqmp_eemi_ops *eemi_ops;
+struct zynqmp_aes_dev *aes_dd;
+
+struct zynqmp_aes_dev {
+	struct device *dev;
+};
+
+struct zynqmp_aes_op {
+	struct zynqmp_aes_dev *dd;
+	void *src;
+	void *dst;
+	int len;
+	u8 key[ZYNQMP_AES_KEY_SIZE];
+	u8 *iv;
+	u32 keylen;
+	u32 keytype;
+};
+
+struct zynqmp_aes_data {
+	u64 src;
+	u64 iv;
+	u64 key;
+	u64 dst;
+	u64 size;
+	u64 optype;
+	u64 keysrc;
+};
+
+static int zynqmp_setkey_blk(struct crypto_tfm *tfm, const u8 *key,
+			     unsigned int len)
+{
+	struct zynqmp_aes_op *op = crypto_tfm_ctx(tfm);
+
+	if (((len != 1) && (len !=  ZYNQMP_AES_KEY_SIZE)) || (!key))
+		return -EINVAL;
+
+	if (len == 1) {
+		op->keytype = *key;
+
+		if ((op->keytype < ZYNQMP_AES_KUP_KEY) ||
+			(op->keytype > ZYNQMP_AES_PUF_KEY))
+			return -EINVAL;
+
+	} else if (len == ZYNQMP_AES_KEY_SIZE) {
+		op->keytype = ZYNQMP_AES_KUP_KEY;
+		op->keylen = len;
+		memcpy(op->key, key, len);
+	}
+
+	return 0;
+}
+
+static int zynqmp_aes_xcrypt(struct blkcipher_desc *desc,
+			     struct scatterlist *dst,
+			     struct scatterlist *src,
+			     unsigned int nbytes,
+			     unsigned int flags)
+{
+	struct zynqmp_aes_op *op = crypto_blkcipher_ctx(desc->tfm);
+	struct zynqmp_aes_dev *dd = aes_dd;
+	int err, ret, copy_bytes, src_data = 0, dst_data = 0;
+	dma_addr_t dma_addr, dma_addr_buf;
+	struct zynqmp_aes_data *abuf;
+	struct blkcipher_walk walk;
+	unsigned int data_size;
+	size_t dma_size;
+	char *kbuf;
+
+	if (!eemi_ops->aes)
+		return -ENOTSUPP;
+
+	if (op->keytype == ZYNQMP_AES_KUP_KEY)
+		dma_size = nbytes + ZYNQMP_AES_KEY_SIZE
+			+ ZYNQMP_AES_IV_SIZE;
+	else
+		dma_size = nbytes + ZYNQMP_AES_IV_SIZE;
+
+	kbuf = dma_alloc_coherent(dd->dev, dma_size, &dma_addr, GFP_KERNEL);
+	if (!kbuf)
+		return -ENOMEM;
+
+	abuf = dma_alloc_coherent(dd->dev, sizeof(struct zynqmp_aes_data),
+				  &dma_addr_buf, GFP_KERNEL);
+	if (!abuf) {
+		dma_free_coherent(dd->dev, dma_size, kbuf, dma_addr);
+		return -ENOMEM;
+	}
+
+	data_size = nbytes;
+	blkcipher_walk_init(&walk, dst, src, data_size);
+	err = blkcipher_walk_virt(desc, &walk);
+	op->iv = walk.iv;
+
+	while ((nbytes = walk.nbytes)) {
+		op->src = walk.src.virt.addr;
+		memcpy(kbuf + src_data, op->src, nbytes);
+		src_data = src_data + nbytes;
+		nbytes &= (ZYNQMP_AES_BLOCKSIZE - 1);
+		err = blkcipher_walk_done(desc, &walk, nbytes);
+	}
+	memcpy(kbuf + data_size, op->iv, ZYNQMP_AES_IV_SIZE);
+	abuf->src = dma_addr;
+	abuf->dst = dma_addr;
+	abuf->iv = abuf->src + data_size;
+	abuf->size = data_size - ZYNQMP_AES_GCM_SIZE;
+	abuf->optype = flags;
+	abuf->keysrc = op->keytype;
+
+	if (op->keytype == ZYNQMP_AES_KUP_KEY) {
+		memcpy(kbuf + data_size + ZYNQMP_AES_IV_SIZE,
+		       op->key, ZYNQMP_AES_KEY_SIZE);
+
+		abuf->key = abuf->src + data_size + ZYNQMP_AES_IV_SIZE;
+	} else {
+		abuf->key = 0;
+	}
+	eemi_ops->aes(dma_addr_buf, &ret);
+
+	if (ret != 0) {
+		switch (ret) {
+		case ZYNQMP_AES_GCM_TAG_MISMATCH_ERR:
+			dev_err(dd->dev, "ERROR: Gcm Tag mismatch\n\r");
+			break;
+		case ZYNQMP_AES_SIZE_ERR:
+			dev_err(dd->dev, "ERROR : Non word aligned data\n\r");
+			break;
+		case ZYNQMP_AES_WRONG_KEY_SRC_ERR:
+			dev_err(dd->dev, "ERROR: Wrong KeySrc, enable secure mode\n\r");
+			break;
+		case ZYNQMP_AES_PUF_NOT_PROGRAMMED:
+			dev_err(dd->dev, "ERROR: PUF is not registered\r\n");
+			break;
+		default:
+			dev_err(dd->dev, "ERROR: Invalid");
+			break;
+		}
+		goto END;
+	}
+	if (flags)
+		copy_bytes = data_size;
+	else
+		copy_bytes = data_size - ZYNQMP_AES_GCM_SIZE;
+
+	blkcipher_walk_init(&walk, dst, src, copy_bytes);
+	err = blkcipher_walk_virt(desc, &walk);
+
+	while ((nbytes = walk.nbytes)) {
+		memcpy(walk.dst.virt.addr, kbuf + dst_data, nbytes);
+		dst_data = dst_data + nbytes;
+		nbytes &= (ZYNQMP_AES_BLOCKSIZE - 1);
+		err = blkcipher_walk_done(desc, &walk, nbytes);
+	}
+END:
+	memset(kbuf, 0, dma_size);
+	memset(abuf, 0, sizeof(struct zynqmp_aes_data));
+	dma_free_coherent(dd->dev, dma_size, kbuf, dma_addr);
+	dma_free_coherent(dd->dev, sizeof(struct zynqmp_aes_data),
+			  abuf, dma_addr_buf);
+	return err;
+}
+
+static int zynqmp_aes_decrypt(struct blkcipher_desc *desc,
+			      struct scatterlist *dst,
+			      struct scatterlist *src,
+			      unsigned int nbytes)
+{
+	return zynqmp_aes_xcrypt(desc, dst, src, nbytes, ZYNQMP_AES_DECRYPT);
+}
+
+static int zynqmp_aes_encrypt(struct blkcipher_desc *desc,
+			      struct scatterlist *dst,
+			      struct scatterlist *src,
+			      unsigned int nbytes)
+{
+	return zynqmp_aes_xcrypt(desc, dst, src, nbytes, ZYNQMP_AES_ENCRYPT);
+}
+
+static struct crypto_alg zynqmp_alg = {
+	.cra_name		=	"xilinx-zynqmp-aes",
+	.cra_driver_name	=	"zynqmp-aes-gcm",
+	.cra_priority		=	400,
+	.cra_flags		=	CRYPTO_ALG_TYPE_BLKCIPHER |
+					CRYPTO_ALG_KERN_DRIVER_ONLY,
+	.cra_blocksize		=	ZYNQMP_AES_BLOCKSIZE,
+	.cra_ctxsize		=	sizeof(struct zynqmp_aes_op),
+	.cra_alignmask		=	15,
+	.cra_type		=	&crypto_blkcipher_type,
+	.cra_module		=	THIS_MODULE,
+	.cra_u			=	{
+	.blkcipher	=	{
+			.min_keysize	=	0,
+			.max_keysize	=	ZYNQMP_AES_KEY_SIZE,
+			.setkey		=	zynqmp_setkey_blk,
+			.encrypt	=	zynqmp_aes_encrypt,
+			.decrypt	=	zynqmp_aes_decrypt,
+			.ivsize		=	ZYNQMP_AES_IV_SIZE,
+		}
+	}
+};
+
+static const struct of_device_id zynqmp_aes_dt_ids[] = {
+	{ .compatible = "xlnx,zynqmp-aes" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, zynqmp_aes_dt_ids);
+
+static int zynqmp_aes_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	eemi_ops = zynqmp_pm_get_eemi_ops();
+
+	if (IS_ERR(eemi_ops))
+		return PTR_ERR(eemi_ops);
+
+	aes_dd = devm_kzalloc(dev, sizeof(*aes_dd), GFP_KERNEL);
+	if (!aes_dd)
+		return -ENOMEM;
+
+	aes_dd->dev = dev;
+	platform_set_drvdata(pdev, aes_dd);
+
+	ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(44));
+	if (ret < 0) {
+		dev_err(dev, "no usable DMA configuration");
+		return ret;
+	}
+
+	ret = crypto_register_alg(&zynqmp_alg);
+	if (ret)
+		goto err_algs;
+
+	dev_info(dev, "AES Successfully Registered\n\r");
+	return 0;
+
+err_algs:
+	return ret;
+}
+
+static int zynqmp_aes_remove(struct platform_device *pdev)
+{
+	aes_dd = platform_get_drvdata(pdev);
+	if (!aes_dd)
+		return -ENODEV;
+	crypto_unregister_alg(&zynqmp_alg);
+
+	return 0;
+}
+
+static struct platform_driver xilinx_aes_driver = {
+	.probe = zynqmp_aes_probe,
+	.remove = zynqmp_aes_remove,
+	.driver = {
+		.name = "zynqmp_aes",
+		.of_match_table = of_match_ptr(zynqmp_aes_dt_ids),
+	},
+};
+
+module_platform_driver(xilinx_aes_driver);
+
+MODULE_DESCRIPTION("Xilinx ZynqMP AES hw acceleration support.");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Nava kishore Manne <nava.manne@xxxxxxxxxx>");
+MODULE_AUTHOR("Kalyani Akula <kalyani.akula@xxxxxxxxxx>");
-- 
1.8.3.1