Re: [PATCH 1/2] dt-bindings: iio: accel: add binding documentation for ADIS16240

[Ardelean, Alexandru]

On Sun, 2019-09-01 at 21:59 -0300, Rodrigo Carvalho wrote:
> This patch add device tree binding documentation for ADIS16240.
> 
> Signed-off-by: Rodrigo Ribeiro Carvalho <rodrigorsdc@xxxxxxxxx>
> ---
> I have doubt about what maintainer I may to put in that documentation. I
> put Alexandru as maintainer because he reviewed my last patch on this
> driver, so I think that he is a good candidate.

Fine to list me as maintainer for this.

Reviewed-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>

>  .../bindings/iio/accel/adi,adis16240.yaml     | 55 +++++++++++++++++++
>  1 file changed, 55 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
> b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
> new file mode 100644
> index 000000000000..08019b51611c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
> @@ -0,0 +1,55 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/accel/adi,adis16240.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ADIS16240 Programmable Impact Sensor and Recorder driver
> +
> +maintainers:
> +  - Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
> +
> +description: |
> +  ADIS16240 Programmable Impact Sensor and Recorder driver that supports
> +  SPI interface.
> +    https://www.analog.com/en/products/adis16240.html
> +
> +properties:
> +  compatible:
> +    enum:
> +      - adi,adis16240
> +
> +  reg:
> +    maxItems: 1
> +
> +  spi-cpha: true
> +
> +  spi-cpol: true
> +
> +  interrupts:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    spi0 {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        /* Example for a SPI device node */
> +        accelerometer@0 {
> +            compatible = "adi,adis16240";
> +            reg = <0>;
> +            spi-max-frequency = <2500000>;
> +            spi-cpol;
> +            spi-cpha;
> +            interrupt-parent = <&gpio0>;
> +            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> +        };
> +    };