Re: [RESEND v2 1/2] dt-binding docs: sbs_sbs-battery: Addition of force_load binding

[Sebastian Reichel]

Hi,

On Tue, Jul 30, 2019 at 06:10:03PM +0800, Richard Tresidder wrote:
> Add device tree binding documentation for addition of force_load boolean value
> to allow loading a battery during boot even if notpresent at that time.
> 
> Signed-off-by: Richard Tresidder <rtresidd@xxxxxxxxxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt b/Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt
> index 4e78e51..187d7bb 100644
> --- a/Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt
> +++ b/Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt
> @@ -15,7 +15,8 @@ Optional properties :
>     after an external change notification.
>   - sbs,battery-detect-gpios : The gpio which signals battery detection and
>     a flag specifying its polarity.
> -
> + - sbs,force-load : Allow loading of a hot-pluggable battery when there is no
> +   GPIO detect available and the module is statically built.

This does not describe hardware configuration and is not an
acceptable DT property.

-- Sebastian

>  Example:
>  
>  	battery@b {
> @@ -24,4 +25,5 @@ Example:
>  		sbs,i2c-retry-count = <2>;
>  		sbs,poll-retry-count = <10>;
>  		sbs,battery-detect-gpios = <&gpio-controller 122 1>;
> +		sbs,force-load;
>  	}
> -- 
> 1.8.3.1
>

Attachment: signature.asc
Description: PGP signature