Re: [PATCH 4/4] arm64: dts: add support for A1 based Amlogic AD401

[Jianxin Pan]

Hi Jerome,

Thanks for your suggestion.

I will fix them in the next version.


On 2019/9/3 15:30, Jerome Brunet wrote:
> On Tue 03 Sep 2019 at 02:51, Jianxin Pan <jianxin.pan@xxxxxxxxxxx> wrote:
> 
>> Add basic support for the Amlogic A1 based Amlogic AD401 board:
>> which describe components as follows: Reserve Memory, CPU, GIC, IRQ,
>> Timer, UART. It's capable of booting up into the serial console.
>>
>> Signed-off-by: Jianxin Pan <jianxin.pan@xxxxxxxxxxx>
>> ---
>>  arch/arm64/boot/dts/amlogic/Makefile           |   1 +
>>  arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts |  30 ++++++
>>  arch/arm64/boot/dts/amlogic/meson-a1.dtsi      | 121 +++++++++++++++++++++++++
>>  3 files changed, 152 insertions(+)
>>  create mode 100644 arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts
>>  create mode 100644 arch/arm64/boot/dts/amlogic/meson-a1.dtsi
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
>> index edbf128..1720c45 100644
>> --- a/arch/arm64/boot/dts/amlogic/Makefile
>> +++ b/arch/arm64/boot/dts/amlogic/Makefile
>> @@ -36,3 +36,4 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb
>>  dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb
>>  dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
>>  dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
>> +dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts b/arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts
>> new file mode 100644
>> index 00000000..3c05cc0
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts
>> @@ -0,0 +1,30 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "meson-a1.dtsi"
>> +
>> +/ {
>> +	compatible = "amlogic,ad401", "amlogic,a1";
>> +	model = "Amlogic Meson A1 AD401 Development Board";
>> +
>> +	aliases {
>> +		serial0 = &uart_AO_B;
>> +	};
> 
> Newline here please
> 
>> +	chosen {
>> +		stdout-path = "serial0:115200n8";
>> +	};
> 
> same
> 
>> +	memory@0 {
>> +		device_type = "memory";
>> +		linux,usable-memory = <0x0 0x0 0x0 0x8000000>;
>> +	};
>> +};
>> +
>> +&uart_AO_B {
>> +	status = "okay";
>> +	/*pinctrl-0 = <&uart_ao_a_pins>;*/
>> +	/*pinctrl-names = "default";*/
> 
> Remove the commented code please
> 
>> +};
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
>> new file mode 100644
>> index 00000000..b98d648
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
>> @@ -0,0 +1,121 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
>> + */
>> +
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +
>> +/ {
>> +	compatible = "amlogic,a1";
>> +
>> +	interrupt-parent = <&gic>;
>> +	#address-cells = <2>;
>> +	#size-cells = <2>;
>> +
>> +	cpus {
>> +		#address-cells = <0x2>;
>> +		#size-cells = <0x0>;
>> +
>> +		cpu0: cpu@0 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a35";
>> +			reg = <0x0 0x0>;
>> +			enable-method = "psci";
>> +			next-level-cache = <&l2>;
>> +		};
>> +
>> +		cpu1: cpu@1 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a35";
>> +			reg = <0x0 0x1>;
>> +			enable-method = "psci";
>> +			next-level-cache = <&l2>;
>> +		};
>> +
>> +		l2: l2-cache0 {
>> +			compatible = "cache";
>> +		};
>> +	};
> 
> New line here please
> 
> With this minor comments adressed, looks good.
> 
> Reviewed-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
> 
>> +	psci {
>> +		compatible = "arm,psci-1.0";
>> +		method = "smc";
>> +	};
>> +
>> +	reserved-memory {
>> +		#address-cells = <2>;
>> +		#size-cells = <2>;
>> +		ranges;
>> +
>> +		linux,cma {
>> +			compatible = "shared-dma-pool";
>> +			reusable;
>> +			size = <0x0 0x800000>;
>> +			alignment = <0x0 0x400000>;
>> +			linux,cma-default;
>> +		};
>> +	};
>> +
>> +	sm: secure-monitor {
>> +		compatible = "amlogic,meson-gxbb-sm";
>> +	};
>> +
>> +	soc {
>> +		compatible = "simple-bus";
>> +		#address-cells = <2>;
>> +		#size-cells = <2>;
>> +		ranges;
>> +
>> +		uart_AO: serial@fe001c00 {
>> +			compatible = "amlogic,meson-gx-uart",
>> +				     "amlogic,meson-ao-uart";
>> +			reg = <0x0 0xfe001c00 0x0 0x18>;
>> +			interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
>> +			clocks = <&xtal>, <&xtal>, <&xtal>;
>> +			clock-names = "xtal", "pclk", "baud";
>> +			status = "disabled";
>> +		};
>> +
>> +		uart_AO_B: serial@fe002000 {
>> +			compatible = "amlogic,meson-gx-uart",
>> +				     "amlogic,meson-ao-uart";
>> +				     reg = <0x0 0xfe002000 0x0 0x18>;
>> +			interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
>> +			clocks = <&xtal>, <&xtal>, <&xtal>;
>> +			clock-names = "xtal", "pclk", "baud";
>> +			status = "disabled";
>> +		};
>> +
>> +		gic: interrupt-controller@ff901000 {
>> +			compatible = "arm,gic-400";
>> +			reg = <0x0 0xff901000 0x0 0x1000>,
>> +			      <0x0 0xff902000 0x0 0x2000>,
>> +			      <0x0 0xff904000 0x0 0x2000>,
>> +			      <0x0 0xff906000 0x0 0x2000>;
>> +			interrupt-controller;
>> +			interrupts = <GIC_PPI 9
>> +				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
>> +			#interrupt-cells = <3>;
>> +			#address-cells = <0>;
>> +		};
>> +	};
>> +
>> +	timer {
>> +		compatible = "arm,armv8-timer";
>> +		interrupts = <GIC_PPI 13
>> +			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
>> +			     <GIC_PPI 14
>> +			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
>> +			     <GIC_PPI 11
>> +			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
>> +			     <GIC_PPI 10
>> +			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
>> +	};
>> +
>> +	xtal: xtal-clk {
>> +		compatible = "fixed-clock";
>> +		clock-frequency = <24000000>;
>> +		clock-output-names = "xtal";
>> +		#clock-cells = <0>;
>> +	};
>> +};
>> -- 
>> 2.7.4
> 
> .
>