Re: [PATCH v2 1/2] dt-bindings: phy: intel-sdxc-phy: Add YAML schema for LGM SDXC PHY

[Rob Herring]

On Tue, Sep 3, 2019 at 11:52 AM Ramuthevar, Vadivel MuruganX
<vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx> wrote:
>
> Hi Rob,
>
>     Thank you for your suggestions and clarifications.
>
> On 3/9/2019 6:34 PM, Rob Herring wrote:
> > On Tue, Sep 3, 2019 at 11:08 AM Ramuthevar, Vadivel MuruganX
> > <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx> wrote:
> >> Hi Rob,
> >>
> >>    Thank you so much for prompt reply.
> >>
> >> On 3/9/2019 5:19 PM, Rob Herring wrote:
> >>> On Tue, Sep 3, 2019 at 2:57 AM Ramuthevar, Vadivel MuruganX
> >>> <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx> wrote:
> >>>> Hi Rob,
> >>>>
> >>>> Thank you for review comments.
> >>>>
> >>>> On 2/9/2019 9:38 PM, Rob Herring wrote:
> >>>>> On Wed, Aug 28, 2019 at 08:43:14PM +0800, Ramuthevar,Vadivel MuruganX wrote:
> >>>>>> From: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
> >>>>>>
> >>>>>> Add a YAML schema to use the host controller driver with the
> >>>>>> SDXC PHY on Intel's Lightning Mountain SoC.
> >>>>>>
> >>>>>> Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
> >>>>>> ---
> >>>>>>     .../bindings/phy/intel,lgm-sdxc-phy.yaml           | 52 ++++++++++++++++++++++
> >>>>>>     .../devicetree/bindings/phy/intel,syscon.yaml      | 33 ++++++++++++++
> >>>>>>     2 files changed, 85 insertions(+)
> >>>>>>     create mode 100644 Documentation/devicetree/bindings/phy/intel,lgm-sdxc-phy.yaml
> >>>>>>     create mode 100644 Documentation/devicetree/bindings/phy/intel,syscon.yaml
> >>>>>>
> >>>>>> diff --git a/Documentation/devicetree/bindings/phy/intel,lgm-sdxc-phy.yaml b/Documentation/devicetree/bindings/phy/intel,lgm-sdxc-phy.yaml
> >>>>>> new file mode 100644
> >>>>>> index 000000000000..99647207b414
> >>>>>> --- /dev/null
> >>>>>> +++ b/Documentation/devicetree/bindings/phy/intel,lgm-sdxc-phy.yaml
> >>>>>> @@ -0,0 +1,52 @@
> >>>>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> >>>>>> +%YAML 1.2
> >>>>>> +---
> >>>>>> +$id: http://devicetree.org/schemas/phy/intel,lgm-sdxc-phy.yaml#
> >>>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> >>>>>> +
> >>>>>> +title: Intel Lightning Mountain(LGM) SDXC PHY Device Tree Bindings
> >>>>>> +
> >>>>>> +maintainers:
> >>>>>> +  - Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
> >>>>>> +
> >>>>>> +allOf:
> >>>>>> +  - $ref: "intel,syscon.yaml"
> >>>>> You don't need this. It should be selected and applied by the compatible
> >>>>> string matching.
> >>>> Agreed, fix it in the next patch.
> >>>>>> +
> >>>>>> +description: Binding for SDXC PHY
> >>>>>> +
> >>>>>> +properties:
> >>>>>> +  compatible:
> >>>>>> +    const: intel,lgm-sdxc-phy
> >>>>>> +
> >>>>>> +  intel,syscon:
> >>>>>> +    description: phandle to the sdxc through syscon
> >>>>>> +
> >>>>>> +  clocks:
> >>>>>> +    maxItems: 1
> >>>>>> +
> >>>>>> +  clock-names:
> >>>>>> +    maxItems: 1
> >>>>>> +
> >>>>>> +  "#phy-cells":
> >>>>>> +    const: 0
> >>>>>> +
> >>>>>> +required:
> >>>>>> +  - "#phy-cells"
> >>>>>> +  - compatible
> >>>>>> +  - intel,syscon
> >>>>>> +  - clocks
> >>>>>> +  - clock-names
> >>>>>> +
> >>>>>> +additionalProperties: false
> >>>>>> +
> >>>>>> +examples:
> >>>>>> +  - |
> >>>>>> +    sdxc_phy: sdxc_phy {
> >>>>>> +        compatible = "intel,lgm-sdxc-phy";
> >>>>>> +        intel,syscon = <&sysconf>;
> >>>>> Make this a child of the below node and then you don't need this.
> >>>>>
> >>>>> If there's a register address range associated with this, then add a reg
> >>>>> property.
> >>>> Thanks for comments,  I have defined herewith example
> >>>>
> >>>> sysconf: chiptop@e0020000 {
> >>>>                compatible = "intel,syscon";
> >>> Needs to be SoC specific value.
> >> Agreed! it should be "intel, lgm-syscon"
> >>>>                reg = <0xe0020000 0x100>;
> >>>>
> >>>>                emmc_phy: emmc_phy {
> >>>>                    compatible = "intel,lgm-emmc-phy";
> >>>>                    intel,syscon = <&sysconf>;
> >>> This is redundant because you can just get the parent node.
> >>>
> >>> If there's a defined register range within the 'intel,syscon' block
> >>> then define it here with 'reg'.
> >> Agreed!, avoided redundant
> >>
> >> sysconf: chiptop@e0020000 {
> >>               compatible = "intel,lgm-syscon";
> >>               emmc_phy: emmc_phy {
> >>                   compatible = "intel,lgm-emmc-phy";
> >>                   reg = <0xe0020000 0x100>;
> > This is the same addresses you had for the parent, so that doesn't
> > seem right. The parent should have the entire range and then the child
> > nodes only the addresses for their functions. However, if the
> > registers are all interleaved then you can really put 'reg' in the
> > child nodes and just have it only in the parent. We don't want to have
> > overlapping addresses in DT.
> syscon is parent node, which has the base address for all the peripheral
> registers and used by child nodes.
> child nodes have only offsets, we do not specify in device tree.

Right, and I'm asking you to add the offsets whether Linux uses them or not.

Rob