Re: [PATCH v2] riscv: add support for SECCOMP and SECCOMP_FILTER

[Palmer Dabbelt]

On Wed, 28 Aug 2019 10:52:05 PDT (-0700), luto@xxxxxxxxxxxxxx wrote:
> > On Aug 25, 2019, at 2:59 PM, Kees Cook <keescook@xxxxxxxxxxxx> wrote:
> >
> > > On Thu, Aug 22, 2019 at 01:55:22PM -0700, David Abdurachmanov wrote:
> > > This patch was extensively tested on Fedora/RISCV (applied by default on
> > > top of 5.2-rc7 kernel for <2 months). The patch was also tested with 5.3-rc
> > > on QEMU and SiFive Unleashed board.
> >
> > Oops, I see the mention of QEMU here. Where's the best place to find
> > instructions on creating a qemu riscv image/environment?
>
> I donât suppose one of you riscv folks would like to contribute riscv support to virtme?  virtme-run âarch=riscv would be quite nice, and the total patch should be just a couple lines.  Unfortunately, it helps a lot to understand the subtleties of booting the architecture to write those couple lines :)

What mailing list should I sent this to?  You need to use the "virtme" branch 
of kernel.org/palmer/linux.git until I send the defconfig patches.

commit a8bd7b318691891991caea298f9a5ed0f815c322
gpg: Signature made Tue 03 Sep 2019 03:22:45 PM PDT
gpg:                using RSA key 00CE76D1834960DFCE886DF8EF4CA1502CCBAB41
gpg:                issuer "palmer@xxxxxxxxxxx"
gpg: Good signature from "Palmer Dabbelt <palmer@xxxxxxxxxxx>" [ultimate]
gpg:                 aka "Palmer Dabbelt <palmer@xxxxxxxxxx>" [ultimate]
Author: Palmer Dabbelt <palmer@xxxxxxxxxx>
Date:   Tue Sep 3 14:39:39 2019 -0700

   Add RISC-V support

   This expects a kernel with the plan 9 stuff supported (not yet in
   defconfig) and a new QEMU (as described in the README).  I'm also not
   100% sure it's working, as I'm getting

       /bin/sh: exec: line 1: /run/virtme/guesttools/virtme-init: not found

   Signed-off-by: Palmer Dabbelt <palmer@xxxxxxxxxx>

diff --git a/README.md b/README.md
index 51b6583..d53a456 100644
--- a/README.md
+++ b/README.md
@@ -112,6 +112,14 @@ PPC64

PPC64 appears to be reasonably functional.

+RISC-V
+------
+
+riscv64 works out of the box, but you'll neet at least QEMU-4.1.0 to be
+able to run `vmlinux`-style kernels.  riscv32 is not supported because
+there are no existing userspace images for it.  Support is provided via
+QEMU's `virt` machine with OpenSBI for firmware.
+
Others
------

diff --git a/virtme/architectures.py b/virtme/architectures.py
index 9871ea4..ee84494 100644
--- a/virtme/architectures.py
+++ b/virtme/architectures.py
@@ -207,6 +207,30 @@ class Arch_ppc64(Arch):
        # Apparently SLOF (QEMU's bundled firmware?) can't boot a zImage.
        return 'vmlinux'

+class Arch_riscv64(Arch):
+    def __init__(self, name):
+        Arch.__init__(self, name)
+
+        self.defconfig_target = 'riscv64_defconfig'
+        self.qemuname = 'riscv64'
+        self.linuxname = 'riscv'
+        self.gccname = 'riscv64'
+
+    def qemuargs(self, is_native):
+        ret = Arch.qemuargs(is_native)
+
+        ret.extend(['-machine', 'virt'])
+        ret.extend(['-bios', 'default'])
+
+        return ret
+
+    @staticmethod
+    def serial_console_args():
+        return ['console=ttyS0']
+
+    def kimg_path(self):
+        return 'arch/riscv/boot/Image'
+
class Arch_sparc64(Arch):
    def __init__(self, name):
        Arch.__init__(self, name)
@@ -264,6 +288,7 @@ ARCHES = {
    'arm': Arch_arm,
    'aarch64': Arch_aarch64,
    'ppc64': Arch_ppc64,
+    'riscv64': Arch_riscv64,
    'sparc64': Arch_sparc64,
    's390x': Arch_s390x,
}