Re: [PATCH 1/2] dt-bindings: milbeaut-m10v-xdmac: Add Socionext Milbeaut XDMAC bindings

[Vinod Koul]

On 18-08-19, 00:22, jassisinghbrar@xxxxxxxxx wrote:
> From: Jassi Brar <jaswinder.singh@xxxxxxxxxx>
> 
> Document the devicetree bindings for Socionext Milbeaut XDMAC
> controller. Controller only supports Mem->Mem transfers. Number
> of physical channels are determined by the number of irqs registered.
> 
> Signed-off-by: Jassi Brar <jaswinder.singh@xxxxxxxxxx>
> ---
>  .../bindings/dma/milbeaut-m10v-xdmac.txt      | 24 +++++++++++++++++++
>  1 file changed, 24 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/dma/milbeaut-m10v-xdmac.txt
> 
> diff --git a/Documentation/devicetree/bindings/dma/milbeaut-m10v-xdmac.txt b/Documentation/devicetree/bindings/dma/milbeaut-m10v-xdmac.txt
> new file mode 100644
> index 000000000000..1f15512e3f19
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/milbeaut-m10v-xdmac.txt
> @@ -0,0 +1,24 @@
> +* Milbeaut AXI DMA Controller
> +
> +Milbeaut AXI DMA controller has only memory to memory transfer capability.
> +
> +* DMA controller
> +
> +Required property:
> +- compatible: 	Should be  "socionext,milbeaut-m10v-xdmac"
> +- reg:		Should contain DMA registers location and length.
> +- interrupts: 	Should contain all of the per-channel DMA interrupts.
> +                Number of channels is configurable - 2, 4 or 8, so
> +                the number of interrupts specfied should be {2,4,8}.

s/specfied/specified

-- 
~Vinod