Re: [PATCH] serial: max310x: turn off transmitter before activating AutoCTS or auto transmitter flow control
From: Greg Kroah-Hartman
Date: Wed Sep 04 2019 - 03:30:27 EST
On Fri, Aug 30, 2019 at 09:58:41AM +0000, Christoph Vogtländer wrote:
> As documented in the data-sheet, the transmitter must be disabled before
> activating AutoCTS or auto transmitter flow control. Accordingly, the
> transmitter must be enabled after AutoCTS or auto transmitter flow
> control gets deactivated.
>
> Signed-off-by: Christoph Vogtländer <c.vogtlaender@xxxxxxxxxxxxxxxxxxxxxxxxx>
> ---
> drivers/tty/serial/max310x.c | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
> index fb5a7e0e58e9..adfef6dae4a7 100644
> --- a/drivers/tty/serial/max310x.c
> +++ b/drivers/tty/serial/max310x.c
> @@ -860,6 +860,15 @@ static void max310x_set_termios(struct uart_port *port,
> max310x_port_write(port, MAX310X_XON1_REG, termios->c_cc[VSTART]);
> max310x_port_write(port, MAX310X_XOFF1_REG, termios->c_cc[VSTOP]);
>
> +/* Disable transmitter before enabling AutoCTS or auto transmitter
> + * flow control
> + */
> +if (termios->c_cflag & CRTSCTS || termios->c_iflag & IXOFF) {
> +max310x_port_update(port, MAX310X_MODE1_REG,
> + MAX310X_MODE1_TXDIS_BIT,
> + MAX310X_MODE1_TXDIS_BIT);
> +}
> +
> port->status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS | UPSTAT_AUTOXOFF);
>
> if (termios->c_cflag & CRTSCTS) {
> @@ -878,6 +887,15 @@ static void max310x_set_termios(struct uart_port *port,
> }
> max310x_port_write(port, MAX310X_FLOWCTRL_REG, flow);
>
> +/* Enable transmitter after disabling AutoCTS and auto transmitter
> + * flow control
> + */
> +if (!(termios->c_cflag & CRTSCTS) && !(termios->c_iflag & IXOFF)) {
> +max310x_port_update(port, MAX310X_MODE1_REG,
> + MAX310X_MODE1_TXDIS_BIT,
> + 0);
> +}
> +
> /* Get baud rate generator configuration */
> baud = uart_get_baud_rate(port, termios, old,
> port->uartclk / 16 / 0xffff,
> --
> 2.22.1
>
Same problem here, this is impossible to apply.
greg k-h