[PATCH] USB: dummy-hcd: fix power budget for SuperSpeed mode

[Jacky.Cao]

The power budget for SuperSpeed mode should be 900 mA
according to USB3.0 specification, so set the power
budget to 900 mA for dummy_start_ss which is only used
for SuperSpeed mode.

If the max power consumption of SuperSpeed device is
larger than 500 mA, insufficient available bus power
error happens in usb_choose_configuration function
when the device connects to dummy hcd.

Signed-off-by: Jacky Cao <Jacky.Cao@xxxxxxxx>
---
drivers/usb/gadget/udc/dummy_hcd.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c
index 8414fac..52f2cf5 100644
--- a/drivers/usb/gadget/udc/dummy_hcd.c
+++ b/drivers/usb/gadget/udc/dummy_hcd.c
@@ -48,6 +48,7 @@
#define DRIVER_VERSION "02 May 2005"

 #define POWER_BUDGET  500  /* in mA; use 8 for low-power port testing */
+#define POWER_BUDGET_3_0  900  /* in mA */

 static const char  driver_name[] = "dummy_hcd";
static const char  driver_desc[] = "USB Host+Gadget Emulator";
@@ -2432,7 +2433,7 @@ static int dummy_start_ss(struct dummy_hcd *dum_hcd)
     dum_hcd->rh_state = DUMMY_RH_RUNNING;
     dum_hcd->stream_en_ep = 0;
     INIT_LIST_HEAD(&dum_hcd->urbp_list);
-     dummy_hcd_to_hcd(dum_hcd)->power_budget = POWER_BUDGET;
+     dummy_hcd_to_hcd(dum_hcd)->power_budget = POWER_BUDGET_3_0;
     dummy_hcd_to_hcd(dum_hcd)->state = HC_STATE_RUNNING;
     dummy_hcd_to_hcd(dum_hcd)->uses_new_polling = 1;
#ifdef CONFIG_USB_OTG
-- 
2.7.4