[PATCH AUTOSEL 5.2 09/94] arm64: dts: meson-g12a: add missing dwc2 phy-names

[Sasha Levin]

From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>

[ Upstream commit 3d4bacdc207a7b62941700b374e7199cbb184a43 ]

The G12A USB2 OTG capable PHY uses a 8bit large UTMI bus, and the OTG
controller gets the PHY but width by probing the associated phy.

By default it will use 16bit wide settings if a phy is not specified,
in our case we specified the phy, but not the phy-names.

The dwc2 bindings specifies that if phys is present, phy-names shall be
"usb2-phy".

Adding phy-names = "usb2-phy" solves the OTG PHY bus configuration.

Fixes: 9baf7d6be730 ("arm64: dts: meson: g12a: Add G12A USB nodes")
Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
Signed-off-by: Kevin Hilman <khilman@xxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index 9f72396ba7103..4c92c197aeb8a 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -591,6 +591,7 @@
 				clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
 				clock-names = "ddr";
 				phys = <&usb2_phy1>;
+				phy-names = "usb2-phy";
 				dr_mode = "peripheral";
 				g-rx-fifo-size = <192>;
 				g-np-tx-fifo-size = <128>;
-- 
2.20.1