[PATCH 1/1] PCI: iproc: Invalidate PAXB address mapping before programming it

[Abhishek Shah]

Invalidate PAXB inbound/outbound address mapping each time before
programming it. This is helpful for the cases where we need to
reprogram inbound/outbound address mapping without resetting PAXB.
kexec kernel is one such example.

Signed-off-by: Abhishek Shah <abhishek.shah@xxxxxxxxxxxx>
Reviewed-by: Ray Jui <ray.jui@xxxxxxxxxxxx>
Reviewed-by: Vikram Mysore Prakash <vikram.prakash@xxxxxxxxxxxx>
---
 drivers/pci/controller/pcie-iproc.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/drivers/pci/controller/pcie-iproc.c b/drivers/pci/controller/pcie-iproc.c
index e3ca46497470..99a9521ba7ab 100644
--- a/drivers/pci/controller/pcie-iproc.c
+++ b/drivers/pci/controller/pcie-iproc.c
@@ -1245,6 +1245,32 @@ static int iproc_pcie_map_dma_ranges(struct iproc_pcie *pcie)
 	return ret;
 }
 
+static void iproc_pcie_invalidate_mapping(struct iproc_pcie *pcie)
+{
+	struct iproc_pcie_ib *ib = &pcie->ib;
+	struct iproc_pcie_ob *ob = &pcie->ob;
+	int idx;
+
+	if (pcie->ep_is_internal)
+		return;
+
+	if (pcie->need_ob_cfg) {
+		/* iterate through all OARR mapping regions */
+		for (idx = ob->nr_windows - 1; idx >= 0; idx--) {
+			iproc_pcie_write_reg(pcie,
+					     MAP_REG(IPROC_PCIE_OARR0, idx), 0);
+		}
+	}
+
+	if (pcie->need_ib_cfg) {
+		/* iterate through all IARR mapping regions */
+		for (idx = 0; idx < ib->nr_regions; idx++) {
+			iproc_pcie_write_reg(pcie,
+					     MAP_REG(IPROC_PCIE_IARR0, idx), 0);
+		}
+	}
+}
+
 static int iproce_pcie_get_msi(struct iproc_pcie *pcie,
 			       struct device_node *msi_node,
 			       u64 *msi_addr)
@@ -1517,6 +1543,8 @@ int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
 	iproc_pcie_perst_ctrl(pcie, true);
 	iproc_pcie_perst_ctrl(pcie, false);
 
+	iproc_pcie_invalidate_mapping(pcie);
+
 	if (pcie->need_ob_cfg) {
 		ret = iproc_pcie_map_ranges(pcie, res);
 		if (ret) {
-- 
2.17.1