[PATCH 1/2] dt-bindings: sram: Convert SRAM bindings to json-schema
From: Krzysztof Kozlowski
Date: Sat Sep 07 2019 - 07:35:54 EST
Convert generic mmio-sram bindings to DT schema format using
json-schema.
Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
---
.../devicetree/bindings/sram/sram.txt | 80 ----------
.../devicetree/bindings/sram/sram.yaml | 138 ++++++++++++++++++
2 files changed, 138 insertions(+), 80 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sram/sram.txt
create mode 100644 Documentation/devicetree/bindings/sram/sram.yaml
diff --git a/Documentation/devicetree/bindings/sram/sram.txt b/Documentation/devicetree/bindings/sram/sram.txt
deleted file mode 100644
index e98908bd4227..000000000000
--- a/Documentation/devicetree/bindings/sram/sram.txt
+++ /dev/null
@@ -1,80 +0,0 @@
-Generic on-chip SRAM
-
-Simple IO memory regions to be managed by the genalloc API.
-
-Required properties:
-
-- compatible : mmio-sram or atmel,sama5d2-securam
-
-- reg : SRAM iomem address range
-
-Reserving sram areas:
----------------------
-
-Each child of the sram node specifies a region of reserved memory. Each
-child node should use a 'reg' property to specify a specific range of
-reserved memory.
-
-Following the generic-names recommended practice, node names should
-reflect the purpose of the node. Unit address (@<address>) should be
-appended to the name.
-
-Required properties in the sram node:
-
-- #address-cells, #size-cells : should use the same values as the root node
-- ranges : standard definition, should translate from local addresses
- within the sram to bus addresses
-
-Optional properties in the sram node:
-
-- no-memory-wc : the flag indicating, that SRAM memory region has not to
- be remapped as write combining. WC is used by default.
-
-Required properties in the area nodes:
-
-- reg : iomem address range, relative to the SRAM range
-
-Optional properties in the area nodes:
-
-- compatible : standard definition, should contain a vendor specific string
- in the form <vendor>,[<device>-]<usage>
-- pool : indicates that the particular reserved SRAM area is addressable
- and in use by another device or devices
-- export : indicates that the reserved SRAM area may be accessed outside
- of the kernel, e.g. by bootloader or userspace
-- protect-exec : Same as 'pool' above but with the additional
- constraint that code wil be run from the region and
- that the memory is maintained as read-only, executable
- during code execution. NOTE: This region must be page
- aligned on start and end in order to properly allow
- manipulation of the page attributes.
-- label : the name for the reserved partition, if omitted, the label
- is taken from the node name excluding the unit address.
-- clocks : a list of phandle and clock specifier pair that controls the
- single SRAM clock.
-
-Example:
-
-sram: sram@5c000000 {
- compatible = "mmio-sram";
- reg = <0x5c000000 0x40000>; /* 256 KiB SRAM at address 0x5c000000 */
-
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x5c000000 0x40000>;
-
- smp-sram@100 {
- compatible = "socvendor,smp-sram";
- reg = <0x100 0x50>;
- };
-
- device-sram@1000 {
- reg = <0x1000 0x1000>;
- pool;
- };
-
- exported@20000 {
- reg = <0x20000 0x20000>;
- export;
- };
-};
diff --git a/Documentation/devicetree/bindings/sram/sram.yaml b/Documentation/devicetree/bindings/sram/sram.yaml
new file mode 100644
index 000000000000..0821cdb4cef9
--- /dev/null
+++ b/Documentation/devicetree/bindings/sram/sram.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sram/sram.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic on-chip SRAM
+
+maintainers:
+ - FIXME <who@xxxxxxxxxxxx>
+
+description: |+
+ Simple IO memory regions to be managed by the genalloc API.
+
+ Each child of the sram node specifies a region of reserved memory. Each
+ child node should use a 'reg' property to specify a specific range of
+ reserved memory.
+
+ Following the generic-names recommended practice, node names should
+ reflect the purpose of the node. Unit address (@<address>) should be
+ appended to the name.
+
+properties:
+ $nodename:
+ pattern: "^sram(@.*)?"
+
+ compatible:
+ items:
+ - enum:
+ - mmio-sram
+ - atmel,sama5d2-securam
+
+ reg:
+ maxItems: 1
+
+ "#address-cells":
+ description: Should use the same values as the root node.
+
+ "#size-cells":
+ description: Should use the same values as the root node.
+
+ ranges:
+ description:
+ Should translate from local addresses within the sram to bus addresses.
+
+ no-memory-wc:
+ description:
+ The flag indicating, that SRAM memory region has not to be remapped
+ as write combining. WC is used by default.
+ type: boolean
+
+ # TODO: additionalProperties: false
+
+patternProperties:
+ "^([a-z]*-)?sram@[a-f0-9]$":
+ type: object
+ description:
+ Each child of the sram node specifies a region of reserved memory.
+ properties:
+ reg:
+ description:
+ IO mem address range, relative to the SRAM range.
+
+ compatible:
+ $ref: /schemas/types.yaml#/definitions/string
+ description:
+ Should contain a vendor specific string in the form
+ <vendor>,[<device>-]<usage>
+
+ pool:
+ description:
+ Indicates that the particular reserved SRAM area is addressable
+ and in use by another device or devices.
+ type: boolean
+
+ export:
+ description:
+ Indicates that the reserved SRAM area may be accessed outside
+ of the kernel, e.g. by bootloader or userspace.
+ type: boolean
+
+ protect-exec:
+ description: |
+ Same as 'pool' above but with the additional constraint that code
+ will be run from the region and that the memory is maintained as
+ read-only, executable during code execution. NOTE: This region must
+ be page aligned on start and end in order to properly allow
+ manipulation of the page attributes.
+ type: boolean
+
+ label:
+ $ref: /schemas/types.yaml#/definitions/string
+ description:
+ The name for the reserved partition, if omitted, the label is taken
+ from the node name excluding the unit address.
+
+ clocks:
+ description:
+ A list of phandle and clock specifier pair that controls the
+ single SRAM clock.
+
+ # TODO: additionalProperties: false
+
+ required:
+ - reg
+
+required:
+ - compatible
+ - reg
+ - "#address-cells"
+ - "#size-cells"
+ - ranges
+
+examples:
+ - |
+ sram: sram@5c000000 {
+ compatible = "mmio-sram";
+ reg = <0x5c000000 0x40000>; /* 256 KiB SRAM at address 0x5c000000 */
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x5c000000 0x40000>;
+
+ smp-sram@100 {
+ compatible = "socvendor,smp-sram";
+ reg = <0x100 0x50>;
+ };
+
+ device-sram@1000 {
+ reg = <0x1000 0x1000>;
+ pool;
+ };
+
+ exported@20000 {
+ reg = <0x20000 0x20000>;
+ export;
+ };
+ };
--
2.17.1