Re: [PATCH v5 3/7] PCI/VPD: Prevent VPD access for Amazon's Annapurna Labs Root Port

[Bjorn Helgaas]

On Thu, Sep 05, 2019 at 05:00:17PM +0300, Jonathan Chocron wrote:
> The Amazon Annapurna Labs PCIe Root Port exposes the VPD capability,
> but there is no actual support for it.

Oops.  Another oops for the device ID reuse mentioned below.

> Trying to access the VPD (for example, as part of lspci -vv or when
> reading the vpd sysfs file), results in the following warning print:
> 
> pcieport 0001:00:00.0: VPD access failed.  This is likely a firmware bug on this device.  Contact the card vendor for a firmware update

Thanks for not wrapping the message (keeping it together makes it
easier to grep for).  Maybe indent it two spaces since it's quoted
material.

*Is* this a firmware defect?  E.g., could firmware disable this
capability so it doesn't appear in config space, as it apparently can
for the MSI-X capability?

> Signed-off-by: Jonathan Chocron <jonnyc@xxxxxxxxxx>
> Reviewed-by: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>

Acked-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>

> ---
>  drivers/pci/vpd.c | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/drivers/pci/vpd.c b/drivers/pci/vpd.c
> index 4963c2e2bd4c..7915d10f9aa1 100644
> --- a/drivers/pci/vpd.c
> +++ b/drivers/pci/vpd.c
> @@ -571,6 +571,12 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005f, quirk_blacklist_vpd);
>  DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, PCI_ANY_ID,
>  		quirk_blacklist_vpd);
>  DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_QLOGIC, 0x2261, quirk_blacklist_vpd);
> +/*
> + * The Amazon Annapurna Labs 0x0031 device id is reused for other non Root Port
> + * device types, so the quirk is registered for the PCI_CLASS_BRIDGE_PCI class.
> + */
> +DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_AMAZON_ANNAPURNA_LABS, 0x0031,
> +			      PCI_CLASS_BRIDGE_PCI, 8, quirk_blacklist_vpd);
>  
>  /*
>   * For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the
> -- 
> 2.17.1
>