Re: [PATCH 2/2] PCI: dwc: Add support to disable equalization phase 2 and 3

[Andrew Murray]

On Tue, Sep 10, 2019 at 09:51:41PM +0530, Pankaj Dubey wrote:
> On Tue, 10 Sep 2019 at 19:59, Andrew Murray <andrew.murray@xxxxxxx> wrote:
> >
> > On Tue, Sep 10, 2019 at 05:55:02PM +0530, Pankaj Dubey wrote:
> > > From: Anvesh Salveru <anvesh.s@xxxxxxxxxxx>
> > >
> > > In some platforms, PCIe PHY may have issues which will prevent linkup
> > > to happen in GEN3 or high speed. In case equalization fails, link will
> > > fallback to GEN1.
> > >
> > > Designware controller gives flexibility to disable GEN3 equalization
> > > completely or only phase 2 and 3.
> >
> > Do some platforms have issues conducting phase 2 and 3 when they successfully
> > conduct phase 0 and 1?
> >
> 
> Yes, it is possible.
> 
> > >
> > > Platform drivers can disable equalization phase 2 and 3, by setting
> > > dwc_pci_quirk flag DWC_EQUALIZATION_DISABLE.
> > >
> > > Signed-off-by: Anvesh Salveru <anvesh.s@xxxxxxxxxxx>
> > > Signed-off-by: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx>
> > > ---
> > >  drivers/pci/controller/dwc/pcie-designware.c | 3 +++
> > >  drivers/pci/controller/dwc/pcie-designware.h | 2 ++
> > >  2 files changed, 5 insertions(+)
> > >
> > > diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
> > > index bf82091..97a8268 100644
> > > --- a/drivers/pci/controller/dwc/pcie-designware.c
> > > +++ b/drivers/pci/controller/dwc/pcie-designware.c
> > > @@ -472,5 +472,8 @@ void dw_pcie_setup(struct dw_pcie *pci)
> > >       if (pci->dwc_pci_quirk & DWC_EQUALIZATION_DISABLE)
> > >               val |= PORT_LOGIC_GEN3_EQ_DISABLE;
> > >
> > > +     if (pci->dwc_pci_quirk & DWC_EQ_PHASE_2_3_DISABLE)
> > > +             val |= PORT_LOGIC_GEN3_EQ_PHASE_2_3_DISABLE;
> > > +

Also is it harmless to set both DWC_EQUALIZATION_DISABLE and
DWC_EQ_PHASE_2_3_DISABLE? (Which is permitted here).

Thanks,

Andrew Murray

> > >       dw_pcie_writel_dbi(pci, PCIE_PORT_GEN3_RELATED, val);
> > >  }
> > > diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
> > > index a1453c5..b541508 100644
> > > --- a/drivers/pci/controller/dwc/pcie-designware.h
> > > +++ b/drivers/pci/controller/dwc/pcie-designware.h
> > > @@ -31,6 +31,7 @@
> > >
> > >  /* Parameters for PCIe Quirks */
> > >  #define DWC_EQUALIZATION_DISABLE     0x1
> > > +#define DWC_EQ_PHASE_2_3_DISABLE     0x2
> >
> > It only makes sense for either DWC_EQUALIZATION_DISABLE or DWC_EQ_PHASE_2_3_DISABLE
> > to be specified, though if dwc_pci_quirk intends to hold other quirks should these
> > be numbers and not bit fields?
> >
> Yes, you are right in a given platform it will be either
> DWC_EQUALIZATION_DISABLE or DWC_EQ_PHASE_2_3_DISABLE.
> 
> Intention behind making it bit-field was to add other quirks in future.
> 
> > Thanks,
> >
> > Andrew Murray
> >
> > >
> > >  /* Synopsys-specific PCIe configuration registers */
> > >  #define PCIE_PORT_LINK_CONTROL               0x710
> > > @@ -65,6 +66,7 @@
> > >
> > >  #define PCIE_PORT_GEN3_RELATED               0x890
> > >  #define PORT_LOGIC_GEN3_EQ_DISABLE   BIT(16)
> > > +#define PORT_LOGIC_GEN3_EQ_PHASE_2_3_DISABLE BIT(9)
> > >
> > >  #define PCIE_ATU_VIEWPORT            0x900
> > >  #define PCIE_ATU_REGION_INBOUND              BIT(31)
> > > --
> > > 2.7.4
> > >