Re: [PATCH v4 3/9] drm: rcar-du: Add support for CMM

From: Jacopo Mondi
Date: Thu Sep 12 2019 - 03:58:00 EST

Next message: Rahul Tanwar: "[PATCH v1 0/2] pinctrl: Add new pinctrl/GPIO driver"
Previous message: Janosch Frank: "Re: [PATCH] KVM: s390: Remove unused parameter from __inject_sigp_restart()"
In reply to: Kieran Bingham: "Re: [PATCH v4 3/9] drm: rcar-du: Add support for CMM"
Next in thread: Kieran Bingham: "Re: [PATCH v4 3/9] drm: rcar-du: Add support for CMM"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi Kiernan,
thanks for review

On Wed, Sep 11, 2019 at 04:54:58PM +0100, Kieran Bingham wrote:
> Hi Jacopo,
>
> <This time replying to the mail with ML's included Doh!>
>
> On 06/09/2019 14:43, Jacopo Mondi wrote:
> > Add a driver for the R-Car Display Unit Color Correction Module.
> >
> > In most of Gen3 SoCs, each DU output channel is provided with a CMM unit
> > to perform image enhancement and color correction.
> >
> > Add support for CMM through a driver that supports configuration of
> > the 1-dimensional LUT table. More advanced CMM feature will be
>
> s/feature/features/
>
> > implemented on top of this basic one.
>
> s/basic/initial/
>
> >
> > Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> > ---
> > drivers/gpu/drm/rcar-du/Kconfig | 7 +
> > drivers/gpu/drm/rcar-du/Makefile | 1 +
> > drivers/gpu/drm/rcar-du/rcar_cmm.c | 251 +++++++++++++++++++++++++++++
> > drivers/gpu/drm/rcar-du/rcar_cmm.h | 61 +++++++
> > 4 files changed, 320 insertions(+)
> > create mode 100644 drivers/gpu/drm/rcar-du/rcar_cmm.c
> > create mode 100644 drivers/gpu/drm/rcar-du/rcar_cmm.h
> >
> > diff --git a/drivers/gpu/drm/rcar-du/Kconfig
> b/drivers/gpu/drm/rcar-du/Kconfig
> > index 1529849e217e..539d232790d1 100644
> > --- a/drivers/gpu/drm/rcar-du/Kconfig
> > +++ b/drivers/gpu/drm/rcar-du/Kconfig
> > @@ -13,6 +13,13 @@ config DRM_RCAR_DU
> > Choose this option if you have an R-Car chipset.
> > If M is selected the module will be called rcar-du-drm.
> >
> > +config DRM_RCAR_CMM
> > + bool "R-Car DU Color Management Module (CMM) Support"
> > + depends on DRM && OF
> > + depends on DRM_RCAR_DU
> > + help
> > + Enable support for R-Car Color Management Module (CMM).
> > +
> > config DRM_RCAR_DW_HDMI
> > tristate "R-Car DU Gen3 HDMI Encoder Support"
> > depends on DRM && OF
> > diff --git a/drivers/gpu/drm/rcar-du/Makefile
> b/drivers/gpu/drm/rcar-du/Makefile
> > index 6c2ed9c46467..4d1187ccc3e5 100644
> > --- a/drivers/gpu/drm/rcar-du/Makefile
> > +++ b/drivers/gpu/drm/rcar-du/Makefile
> > @@ -15,6 +15,7 @@ rcar-du-drm-$(CONFIG_DRM_RCAR_LVDS) += rcar_du_of.o \
> > rcar-du-drm-$(CONFIG_DRM_RCAR_VSP) += rcar_du_vsp.o
> > rcar-du-drm-$(CONFIG_DRM_RCAR_WRITEBACK) += rcar_du_writeback.o
> >
> > +obj-$(CONFIG_DRM_RCAR_CMM) += rcar_cmm.o
> > obj-$(CONFIG_DRM_RCAR_DU) += rcar-du-drm.o
> > obj-$(CONFIG_DRM_RCAR_DW_HDMI) += rcar_dw_hdmi.o
> > obj-$(CONFIG_DRM_RCAR_LVDS) += rcar_lvds.o
> > diff --git a/drivers/gpu/drm/rcar-du/rcar_cmm.c
> b/drivers/gpu/drm/rcar-du/rcar_cmm.c
> > new file mode 100644
> > index 000000000000..3cacdc4474c7
> > --- /dev/null
> > +++ b/drivers/gpu/drm/rcar-du/rcar_cmm.c
> > @@ -0,0 +1,251 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * rcar_cmm.c -- R-Car Display Unit Color Management Module
> > + *
> > + * Copyright (C) 2019 Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> > + */
> > +
> > +#include <linux/io.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/pm_runtime.h>
> > +
> > +#include <drm/drm_color_mgmt.h>
> > +
> > +#include "rcar_cmm.h"
> > +
> > +#define CM2_LUT_CTRL 0x0000
> > +#define CM2_LUT_CTRL_LUT_EN BIT(0)
>
> I'd have a new line here
>
> > +#define CM2_LUT_TBL_BASE 0x0600
> > +#define CM2_LUT_TBL(__i) (CM2_LUT_TBL_BASE + (__i) * 4)
> > +
> > +struct rcar_cmm {
> > + void __iomem *base;
> > + bool enabled;
> > +
> > + /*
> > + * @lut: 1D-LUT status
> > + * @lut.enabled: 1D-LUT enabled flag
> > + * @lut.table: Table of 1D-LUT entries scaled to hardware
> > + * precision (8-bits per color component)
> > + */
> > + struct {
> > + bool enabled;
> > + u32 table[CM2_LUT_SIZE];
> > + } lut;
> > +};
> > +
> > +static inline int rcar_cmm_read(struct rcar_cmm *rcmm, u32 reg)
> > +{
> > + return ioread32(rcmm->base + reg);
> > +}
> > +
> > +static inline void rcar_cmm_write(struct rcar_cmm *rcmm, u32 reg, u32
> data)
> > +{
> > + iowrite32(data, rcmm->base + reg);
> > +}
> > +
> > +/*
> > + * rcar_cmm_lut_extract() - Scale down to hardware precision the DRM
> LUT table
> > + * entries and store them.
> > + * @rcmm: Pointer to the CMM device
> > + * @drm_lut: Pointer to the DRM LUT table
> > + */
> > +static void rcar_cmm_lut_extract(struct rcar_cmm *rcmm,
> > + const struct drm_color_lut *drm_lut)
> > +{
> > + unsigned int i;
>
> I think you're missing the following here:
>
> if (!drm_lut)
> return;
>
> You mention below that drm_lut could be passed in as NULL, which would
> cause a segfault here otherwise.
>

Thanks for spotting, but I should have removed that comment, as I have
killed that case in rcar_du_atomic_commit_update_cmm() in patch 8/9,
as from my testing it seems it is not possible to provide from
userspace a non populated LUT table to just re-enable the CMM.

So we're fine here.

>
> > +
> > + for (i = 0; i < CM2_LUT_SIZE; ++i) {
> > + const struct drm_color_lut *lut = &drm_lut[i];
> > +
> > + rcmm->lut.table[i] = drm_color_lut_extract(lut->red, 8) << 16
> > + | drm_color_lut_extract(lut->green, 8) << 8
> > + | drm_color_lut_extract(lut->blue, 8);
> > + }
> > +}
> > +
> > +/*
> > + * rcar_cmm_lut_write() - Write to hardware the LUT table entries
> from the
> > + * local table.
> > + * @rcmm: Pointer to the CMM device
> > + */
> > +static void rcar_cmm_lut_write(struct rcar_cmm *rcmm)
> > +{
> > + unsigned int i;
> > +
> > + for (i = 0; i < CM2_LUT_SIZE; ++i)
> > + rcar_cmm_write(rcmm, CM2_LUT_TBL(i), rcmm->lut.table[i]);
> > +}
> > +
> > +/*
> > + * rcar_cmm_setup() - Configure the CMM unit.
> > + * @pdev: The platform device associated with the CMM instance
> > + * @config: The CRTC-provided configuration.
>
> I don't think CRTC-provided should be hyphenated like that.
> Perhaps just:
> "The colour management configuration".
>
> As I don't think who provides the configuration is relevant to the
> actual call.
>

I have no idea. I've been bought into this by the comment

"CRTC-provided" is a compound adjective, qualifying the noun
"configuration". It thus needs a hyphen.

I'm happy to remove it for a simpler version.

Thanks
j

> > + * Configure the CMM unit with the CRTC-provided configuration.
>
> s/CRTC-provided/given/
>
> > + * Currently enabling, disabling and programming of the 1-D LUT unit is
> > + * supported.
> > + */
> > +int rcar_cmm_setup(struct platform_device *pdev,
> > + const struct rcar_cmm_config *config)
> > +{
> > + struct rcar_cmm *rcmm = platform_get_drvdata(pdev);
> > +
> > + /*
> > + * As rcar_cmm_setup() is called by atomic commit tail helper, it might
> > + * be called when the CMM is disabled. As we can't program the hardware
> > + * in that case, store the configuration internally and apply it when
> > + * the CMM will be enabled by the CRTC through rcar_cmm_enable().
> > + */
> > + if (!rcmm->enabled) {
> > + if (!config->lut.enable)
> > + return 0;
> > +
> > + rcar_cmm_lut_extract(rcmm, config->lut.table);
> > + rcmm->lut.enabled = true;
> > +
> > + return 0;
> > + }
> > +
> > + /* Stop LUT operations if requested. */
> > + if (!config->lut.enable) {
> > + if (rcmm->lut.enabled) {
> > + rcar_cmm_write(rcmm, CM2_LUT_CTRL, 0);
> > + rcmm->lut.enabled = false;
> > + }
> > +
> > + return 0;
> > + }
> > +
> > + /*
> > + * Enable LUT and program the new gamma table values.
> > + *
> > + * FIXME: In order to have stable operations it is required to first
> > + * enable the 1D-LUT and then program its table entries. This seems to
> > + * contradict what the chip manual reports, and will have to be
> > + * reconsidered when implementing support for double buffering.
> > + */
> > + if (!rcmm->lut.enabled) {
> > + rcar_cmm_write(rcmm, CM2_LUT_CTRL, CM2_LUT_CTRL_LUT_EN);
> > + rcmm->lut.enabled = true;
> > + }
> > +
> > + rcar_cmm_lut_extract(rcmm, config->lut.table);
> > + rcar_cmm_lut_write(rcmm);
> > +
> > + return 0;
> > +}
> > +EXPORT_SYMBOL_GPL(rcar_cmm_setup);
> > +
> > +/*
> > + * rcar_cmm_enable() - Enable the CMM unit.
> > + * @pdev: The platform device associated with the CMM instance
> > + *
> > + * Enable the CMM unit by enabling the parent clock and enabling the CMM
> > + * components, such as 1-D LUT, if requested.
> > + */
> > +int rcar_cmm_enable(struct platform_device *pdev)
> > +{
> > + struct rcar_cmm *rcmm = platform_get_drvdata(pdev);
> > + int ret;
> > +
> > + ret = pm_runtime_get_sync(&pdev->dev);
> > + if (ret < 0)
> > + return ret;
> > +
> > + /* Apply the LUT table values saved at rcar_cmm_setup() time. */
> > + if (rcmm->lut.enabled) {
> > + rcar_cmm_write(rcmm, CM2_LUT_CTRL, CM2_LUT_CTRL_LUT_EN);
> > + rcar_cmm_lut_write(rcmm);
> > + }
> > +
> > + rcmm->enabled = true;
> > +
> > + return 0;
> > +}
> > +EXPORT_SYMBOL_GPL(rcar_cmm_enable);
> > +
> > +/*
> > + * rcar_cmm_disable() - Disable the CMM unit.
> > + * @pdev: The platform device associated with the CMM instance
> > + *
> > + * Disable the CMM unit by stopping the parent clock.
> > + */
> > +void rcar_cmm_disable(struct platform_device *pdev)
> > +{
> > + struct rcar_cmm *rcmm = platform_get_drvdata(pdev);
> > +
> > + rcar_cmm_write(rcmm, CM2_LUT_CTRL, 0);
> > +
> > + pm_runtime_put(&pdev->dev);
> > +
> > + rcmm->lut.enabled = false;
> > + rcmm->enabled = false;
> > +}
> > +EXPORT_SYMBOL_GPL(rcar_cmm_disable);
> > +
> > +/*
> > + * rcar_cmm_init() - Make sure the CMM has probed.
> > + * @pdev: The platform device associated with the CMM instance
> > + *
> > + * Return: 0 if the CMM has probed, -EPROBE_DEFER otherwise
> > + */
> > +int rcar_cmm_init(struct platform_device *pdev)
> > +{
> > + struct rcar_cmm *rcmm = platform_get_drvdata(pdev);
> > +
> > + if (!rcmm)
> > + return -EPROBE_DEFER;
> > +
> > + return 0;
> > +}
> > +EXPORT_SYMBOL_GPL(rcar_cmm_init);
> > +
> > +static int rcar_cmm_probe(struct platform_device *pdev)
> > +{
> > + struct rcar_cmm *rcmm;
> > +
> > + rcmm = devm_kzalloc(&pdev->dev, sizeof(*rcmm), GFP_KERNEL);
> > + if (!rcmm)
> > + return -ENOMEM;
> > + platform_set_drvdata(pdev, rcmm);
> > +
> > + rcmm->base = devm_platform_ioremap_resource(pdev, 0);
> > + if (IS_ERR(rcmm->base))
> > + return PTR_ERR(rcmm->base);
> > +
> > + pm_runtime_enable(&pdev->dev);
> > +
> > + return 0;
> > +}
> > +
> > +static int rcar_cmm_remove(struct platform_device *pdev)
> > +{
> > + pm_runtime_disable(&pdev->dev);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct of_device_id rcar_cmm_of_table[] = {
> > + { .compatible = "renesas,rcar-gen3-cmm", },
> > + { .compatible = "renesas,rcar-gen2-cmm", },
> > + { },
> > +};
> > +MODULE_DEVICE_TABLE(of, rcar_cmm_of_table);
> > +
> > +static struct platform_driver rcar_cmm_platform_driver = {
> > + .probe = rcar_cmm_probe,
> > + .remove = rcar_cmm_remove,
> > + .driver = {
> > + .name = "rcar-cmm",
> > + .of_match_table = rcar_cmm_of_table,
> > + },
> > +};
> > +
> > +module_platform_driver(rcar_cmm_platform_driver);
> > +
> > +MODULE_AUTHOR("Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>");
> > +MODULE_DESCRIPTION("Renesas R-Car CMM Driver");
> > +MODULE_LICENSE("GPL v2");
> > diff --git a/drivers/gpu/drm/rcar-du/rcar_cmm.h
> b/drivers/gpu/drm/rcar-du/rcar_cmm.h
> > new file mode 100644
> > index 000000000000..15a2c874b6a6
> > --- /dev/null
> > +++ b/drivers/gpu/drm/rcar-du/rcar_cmm.h
> > @@ -0,0 +1,61 @@
> > +/* SPDX-License-Identifier: GPL-2.0+ */
> > +/*
> > + * rcar_cmm.h -- R-Car Display Unit Color Management Module
> > + *
> > + * Copyright (C) 2019 Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> > + */
> > +
> > +#ifndef __RCAR_CMM_H__
> > +#define __RCAR_CMM_H__
> > +
> > +#define CM2_LUT_SIZE 256
> > +
> > +struct drm_color_lut;
> > +struct platform_device;
> > +
> > +/**
> > + * struct rcar_cmm_config - CMM configuration
> > + *
> > + * @lut: 1D-LUT configuration
> > + * @lut.enable: 1D-LUT enable flag
> > + * @lut.table: 1D-LUT table entries. Might be set to NULL when the
> CMM has to
> > + * be re-enabled but not re=programmed.
>
> So lut.table can be NULL ... See comment at rcar_cmm_lut_extract()
>
> > + */
> > +struct rcar_cmm_config {
> > + struct {
> > + bool enable;
> > + struct drm_color_lut *table;
> > + } lut;
> > +};
> > +
> > +#if IS_ENABLED(CONFIG_DRM_RCAR_CMM)
> > +int rcar_cmm_init(struct platform_device *pdev);
> > +
> > +int rcar_cmm_enable(struct platform_device *pdev);
> > +void rcar_cmm_disable(struct platform_device *pdev);
> > +
> > +int rcar_cmm_setup(struct platform_device *pdev,
> > + const struct rcar_cmm_config *config);
> > +#else
> > +static inline int rcar_cmm_init(struct platform_device *pdev)
> > +{
> > + return 0;
> > +}
> > +
> > +static inline int rcar_cmm_enable(struct platform_device *pdev)
> > +{
> > + return 0;
> > +}
> > +
> > +static inline void rcar_cmm_disable(struct platform_device *pdev)
> > +{
> > +}
> > +
> > +static int rcar_cmm_setup(struct platform_device *pdev,
> > + const struct rcar_cmm_config *config)
> > +{
> > + return 0;
> > +}
> > +#endif /* IS_ENABLED(CONFIG_DRM_RCAR_CMM) */
> > +
> > +#endif /* __RCAR_CMM_H__ */
> >
>

Attachment: signature.asc
Description: PGP signature

Next message: Rahul Tanwar: "[PATCH v1 0/2] pinctrl: Add new pinctrl/GPIO driver"
Previous message: Janosch Frank: "Re: [PATCH] KVM: s390: Remove unused parameter from __inject_sigp_restart()"
In reply to: Kieran Bingham: "Re: [PATCH v4 3/9] drm: rcar-du: Add support for CMM"
Next in thread: Kieran Bingham: "Re: [PATCH v4 3/9] drm: rcar-du: Add support for CMM"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]