[PATCH] scsi: csiostor: Fix spelling typos

[Arkadiusz Drabczyk]

Fix several spelling typos in comments in csio_hw.c.

Signed-off-by: Arkadiusz Drabczyk <arkadiusz@xxxxxxxxxxxx>
---
 drivers/scsi/csiostor/csio_hw.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/scsi/csiostor/csio_hw.c b/drivers/scsi/csiostor/csio_hw.c
index e519238..950f9cd 100644
--- a/drivers/scsi/csiostor/csio_hw.c
+++ b/drivers/scsi/csiostor/csio_hw.c
@@ -793,10 +793,10 @@ csio_hw_get_flash_params(struct csio_hw *hw)
 			goto found;
 		}
 
-	/* Decode Flash part size.  The code below looks repetative with
+	/* Decode Flash part size.  The code below looks repetitive with
 	 * common encodings, but that's not guaranteed in the JEDEC
-	 * specification for the Read JADEC ID command.  The only thing that
-	 * we're guaranteed by the JADEC specification is where the
+	 * specification for the Read JEDEC ID command.  The only thing that
+	 * we're guaranteed by the JEDEC specification is where the
 	 * Manufacturer ID is in the returned result.  After that each
 	 * Manufacturer ~could~ encode things completely differently.
 	 * Note, all Flash parts must have 64KB sectors.
@@ -983,8 +983,8 @@ csio_do_hello(struct csio_hw *hw, enum csio_dev_state *state)
 			waiting -= 50;
 
 			/*
-			 * If neither Error nor Initialialized are indicated
-			 * by the firmware keep waiting till we exaust our
+			 * If neither Error nor Initialized are indicated
+			 * by the firmware keep waiting till we exhaust our
 			 * timeout ... and then retry if we haven't exhausted
 			 * our retries ...
 			 */
@@ -1738,7 +1738,7 @@ static void csio_link_l1cfg(struct link_config *lc, uint16_t fw_caps,
 	 * Convert Common Code Forward Error Control settings into the
 	 * Firmware's API.  If the current Requested FEC has "Automatic"
 	 * (IEEE 802.3) specified, then we use whatever the Firmware
-	 * sent us as part of it's IEEE 802.3-based interpratation of
+	 * sent us as part of it's IEEE 802.3-based interpretation of
 	 * the Transceiver Module EPROM FEC parameters.  Otherwise we
 	 * use whatever is in the current Requested FEC settings.
 	 */
@@ -2834,7 +2834,7 @@ csio_hws_configuring(struct csio_hw *hw, enum csio_hw_ev evt)
 }
 
 /*
- * csio_hws_initializing - Initialiazing state
+ * csio_hws_initializing - Initializing state
  * @hw - HW module
  * @evt - Event
  *
@@ -3049,7 +3049,7 @@ csio_hws_removing(struct csio_hw *hw, enum csio_hw_ev evt)
 		if (!csio_is_hw_master(hw))
 			break;
 		/*
-		 * The BYE should have alerady been issued, so we cant
+		 * The BYE should have already been issued, so we can't
 		 * use the mailbox interface. Hence we use the PL_RST
 		 * register directly.
 		 */
@@ -3104,7 +3104,7 @@ csio_hws_pcierr(struct csio_hw *hw, enum csio_hw_ev evt)
  *
  *	A table driven interrupt handler that applies a set of masks to an
  *	interrupt status word and performs the corresponding actions if the
- *	interrupts described by the mask have occured.  The actions include
+ *	interrupts described by the mask have occurred.  The actions include
  *	optionally emitting a warning or alert message. The table is terminated
  *	by an entry specifying mask 0.  Returns the number of fatal interrupt
  *	conditions.
@@ -4219,7 +4219,7 @@ csio_mgmtm_exit(struct csio_mgmtm *mgmtm)
  * @hw:		Pointer to HW module.
  *
  * It is assumed that the initialization is a synchronous operation.
- * So when we return afer posting the event, the HW SM should be in
+ * So when we return after posting the event, the HW SM should be in
  * the ready state, if there were no errors during init.
  */
 int
-- 
2.9.0