Re: [PATCH 4/5] thermal: Add generic power domain warming device driver.

From: Ulf Hansson
Date: Fri Sep 13 2019 - 03:55:28 EST

On Thu, 12 Sep 2019 at 22:18, Thara Gopinath <thara.gopinath@xxxxxxxxxx> wrote:
>
> On 09/12/2019 11:04 AM, Ulf Hansson wrote:
>
> Hi Ulf,
>
> Thanks for the review.
> > On Tue, 10 Sep 2019 at 19:14, Thara Gopinath <thara.gopinath@xxxxxxxxxx> wrote:
> >>
> >> Resources modeled as power domains in linux kenrel
> >> can be used to warm the SoC(eg. mx power domain on sdm845).
> >> To support this feature, introduce a generic power domain
> >> warming device driver that can be plugged into the thermal framework
> >> (The thermal framework itself requires further modifiction to
> >> support a warming device in place of a cooling device.
> >> Those extensions are not introduced in this patch series).
> >>
> >> Signed-off-by: Thara Gopinath <thara.gopinath@xxxxxxxxxx>
> >> ---
> >> v1->v2:
> >> - Make power domain based warming device driver a generic
> >> driver in the thermal framework. v1 implemented this as a
> >> Qualcomm specific driver.
> >> - Rename certain variables as per review suggestions on the
> >> mailing list.
> >>
> >> drivers/thermal/Kconfig | 11 +++
> >> drivers/thermal/Makefile | 2 +
> >> drivers/thermal/pwr_domain_warming.c | 174 +++++++++++++++++++++++++++++++++++
> >> 3 files changed, 187 insertions(+)
> >> create mode 100644 drivers/thermal/pwr_domain_warming.c
> >>
> >> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> >> index 9966364..eeb6018 100644
> >> --- a/drivers/thermal/Kconfig
> >> +++ b/drivers/thermal/Kconfig
> >> @@ -187,6 +187,17 @@ config DEVFREQ_THERMAL
> >>
> >> If you want this support, you should say Y here.
> >>
> >> +config PWR_DOMAIN_WARMING_THERMAL
> >> + bool "Power Domain based warming device"
> >> + depends on PM_GENERIC_DOMAINS
> >> + depends on PM_GENERIC_DOMAINS_OF
> >
> > PM_GENERIC_DOMAINS_OF can't be set unless PM_GENERIC_DOMAINS is set too.
> >
> > So I assume it's sufficient to depend on PM_GENERIC_DOMAINS_OF?
>
> Yes, you are right. I will change it.
> >
> >> + help
> >> + This implements the generic power domain based warming
> >> + mechanism through increasing the performance state of
> >> + a power domain.
> >> +
> >> + If you want this support, you should say Y here.
> >> +
> >> config THERMAL_EMULATION
> >> bool "Thermal emulation mode support"
> >> help
> >> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> >> index 74a37c7..382c64a 100644
> >> --- a/drivers/thermal/Makefile
> >> +++ b/drivers/thermal/Makefile
> >> @@ -27,6 +27,8 @@ thermal_sys-$(CONFIG_CLOCK_THERMAL) += clock_cooling.o
> >> # devfreq cooling
> >> thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o
> >>
> >> +thermal_sys-$(CONFIG_PWR_DOMAIN_WARMING_THERMAL) += pwr_domain_warming.o
> >> +
> >> # platform thermal drivers
> >> obj-y += broadcom/
> >> obj-$(CONFIG_THERMAL_MMIO) += thermal_mmio.o
> >> diff --git a/drivers/thermal/pwr_domain_warming.c b/drivers/thermal/pwr_domain_warming.c
> >> new file mode 100644
> >> index 0000000..3dd792b
> >> --- /dev/null
> >> +++ b/drivers/thermal/pwr_domain_warming.c
> >> @@ -0,0 +1,174 @@
> >> +// SPDX-License-Identifier: GPL-2.0
> >> +/*
> >> + * Copyright (c) 2019, Linaro Ltd
> >> + */
> >> +#include <linux/err.h>
> >> +#include <linux/kernel.h>
> >> +#include <linux/init.h>
> >> +#include <linux/of_device.h>
> >> +#include <linux/platform_device.h>
> >> +#include <linux/module.h>
> >> +#include <linux/pm_domain.h>
> >> +#include <linux/pm_runtime.h>
> >> +#include <linux/thermal.h>
> >> +
> >> +struct pd_warming_device {
> >> + struct thermal_cooling_device *cdev;
> >> + struct device *dev;
> >> + int max_state;
> >> + int cur_state;
> >> + bool runtime_resumed;
> >> +};
> >> +
> >> +static const struct of_device_id pd_wdev_match_table[] = {
> >> + { .compatible = "thermal-power-domain-wdev", .data = NULL },
> >> + { }
> >> +};
> >> +MODULE_DEVICE_TABLE(of, pd_wdev_match_table);
> >> +
> >> +static int pd_wdev_get_max_state(struct thermal_cooling_device *cdev,
> >> + unsigned long *state)
> >> +{
> >> + struct pd_warming_device *pd_wdev = cdev->devdata;
> >> +
> >> + *state = pd_wdev->max_state;
> >> + return 0;
> >> +}
> >> +
> >> +static int pd_wdev_get_cur_state(struct thermal_cooling_device *cdev,
> >> + unsigned long *state)
> >> +{
> >> + struct pd_warming_device *pd_wdev = cdev->devdata;
> >> +
> >> + *state = dev_pm_genpd_get_performance_state(pd_wdev->dev);
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static int pd_wdev_set_cur_state(struct thermal_cooling_device *cdev,
> >> + unsigned long state)
> >> +{
> >> + struct pd_warming_device *pd_wdev = cdev->devdata;
> >> + struct device *dev = pd_wdev->dev;
> >> + int ret;
> >> +
> >> + ret = dev_pm_genpd_set_performance_state(dev, state);
> >> +
> >> + if (ret)
> >> + return ret;
> >> +
> >> + if (state && !pd_wdev->runtime_resumed) {
> >> + ret = pm_runtime_get_sync(dev);
> >> + pd_wdev->runtime_resumed = true;
> >> + } else if (!state && pd_wdev->runtime_resumed) {
> >> + ret = pm_runtime_put(dev);
> >> + pd_wdev->runtime_resumed = false;
> >> + }
> >> +
> >> + return ret;
> >> +}
> >> +
> >> +static struct thermal_cooling_device_ops pd_warming_device_ops = {
> >> + .get_max_state = pd_wdev_get_max_state,
> >> + .get_cur_state = pd_wdev_get_cur_state,
> >> + .set_cur_state = pd_wdev_set_cur_state,
> >> +};
> >> +
> >> +static int pd_wdev_create(struct device *dev, const char *name)
> >> +{
> >> + struct pd_warming_device *pd_wdev;
> >> + int state_count;
> >> +
> >> + pd_wdev = devm_kzalloc(dev, sizeof(*pd_wdev), GFP_KERNEL);
> >> + if (!pd_wdev)
> >> + return -ENOMEM;
> >> +
> >> + state_count = dev_pm_genpd_performance_state_count(dev);
> >> + if (state_count < 0)
> >> + return state_count;
> >> +
> >> + pd_wdev->dev = dev;
> >> + pd_wdev->max_state = state_count - 1;
> >> + pd_wdev->runtime_resumed = false;
> >> +
> >> + pm_runtime_enable(dev);
> >> +
> >> + pd_wdev->cdev = thermal_of_cooling_device_register
> >> + (dev->of_node, name,
> >> + pd_wdev,
> >> + &pd_warming_device_ops);
> >> + if (IS_ERR(pd_wdev->cdev)) {
> >> + dev_err(dev, "unable to register %s cooling device\n", name);
> >> + pm_runtime_disable(dev);
> >> +
> >> + return PTR_ERR(pd_wdev->cdev);
> >> + }
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static int pd_wdev_probe(struct platform_device *pdev)
> >> +{
> >> + struct device *dev = &pdev->dev, *pd_dev;
> >> + const char *pd_name;
> >> + int id, count, ret = 0;
> >> +
> >> + count = of_count_phandle_with_args(dev->of_node, "power-domains",
> >> + "#power-domain-cells");
> >
> > Perhaps this should be converted to genpd OF helper function instead,
> > that allows the caller to know how many power-domains there are
> > specified for a device node.
>
> I am ok with this if you think that a OF helper to get the number of
> power domains is a useful helper in the genpd framework. I can add it as
> part of the next revision. Or do you want me to send it across separate?

Feel free to include in the next version of the series. In case it's needed.

> >
> >> +
> >> + if (count > 1) {
> >> + for (id = 0; id < count; id++) {
> >> + ret = of_property_read_string_index
> >> + (dev->of_node, "power-domain-names",
> >> + id, &pd_name);
> >> + if (ret) {
> >> + dev_err(dev, "Error reading the power domain name %d\n", ret);
> >> + continue;
> >> + }
> >
> > It looks a bit awkward that you want to re-use the power-domain-names
> > as the name for the cooling (warming) device. This isn't really what
> > we use the "*-names" bindings for in general, I think.
> >
> > Anyway, if you want a name corresponding to the actual attached PM
> > domain, perhaps re-using "->name" from the struct generic_pm_domain is
> > better. We can add a genpd helper for that, no problem. Of course it
> > also means that you must call dev_pm_domain_attach_by_id() first, to
> > attach the device and then get the name of the genpd, but that should
> > be fine.
>
> Ya. I need a name corresponding to the power domain name (or something
> very close) to identify the actual warming device in the sysfs entries.
> I can use genpd->name and a helper function to achieve it. I can include
> it in Patch 1/5 where I add other helper functions.

A separate patch please, but yeah, fold it in into @subject series.

> >
> >> +
> >> + pd_dev = dev_pm_domain_attach_by_id(dev, id);
> >> + if (IS_ERR(pd_dev)) {
> >> + dev_err(dev, "Error attaching power domain %s %ld\n", pd_name, PTR_ERR(pd_dev));
> >> + continue;
> >> + }
> >> +
> >> + ret = pd_wdev_create(pd_dev, pd_name);
> >> + if (ret) {
> >> + dev_err(dev, "Error building cooling device %s %d\n", pd_name, ret);
> >> + dev_pm_domain_detach(pd_dev, false);
> >> + continue;
> >> + }
> >
> > I am wondering about the use case of having multiple PM domains
> > attached to the cooling (warming) device. Is that really needed?
> > Perhaps you can elaborate on that a bit?
> Ya. I though about this as well. I don't have a use case. In my current
> case it is just one power domain on the SoC. But considering this is now
> a generic driver, in my opinion this has to be a generic solution. So if
> you think about this, the device should be able to specify any number of
> power domains that can behave as a warming device since a SoC can have
> any number of power domain based warming devices. May be one to warm up
> the cpus, one for gpus etc.

I get that, but you can always have more than one warming device. Each
warming device would then be attached to a single PM domain. Or is
there a problem with that?

In any case, if you don't have use case for multiple PM domains per
warming device at this point, I would rather keep it simple and start
to support only the single PM domain case.

>
> So another way of implementing this whole thing is to avoid having a
> special power domain warming device defined in the device tree. Instead,
> add a few new binding to the power-domain controller/provider entries
> to specify if a power domain controlled by the provider can act as a
> warming device or not. And have the initialization code for the power
> domain controller (of_genpd_add_provider_onecell or any other suitable
> API) register the specified power domain as a warming device. The DT
> entries should probably look something like below in the case.
>
> rpmhpd: power-controller {
> compatible = "qcom,sdm845-rpmhpd";
> #power-domain-cells = <1>;
> hosts-warming-dev;
> warming-dev-names = "mx";
> operating-points-v2 = <&rpmhpd_opp_table>;
>
> rpmhpd_opp_table: opp-table {
> compatible = "operating-points-v2";
> ....
>
> And have the following in of_genpd_add_provider_onecell
>
> if (hosts-warming-dev)
> # loop through the warming-dev-names and register them as power domain
> warming devices.
>
> You think this is a better idea?

Not really, but you need to re-direct that question to DT maintainers
if want a better answer.

>
> >
> >> + }
> >> + } else if (count == 1) {
> >> + ret = of_property_read_string_index(dev->of_node,
> >> + "power-domain-names",
> >> + 0, &pd_name);
> >> + if (ret) {
> >> + dev_err(dev, "Error reading the power domain name %d\n", ret);
> >> + goto exit;
> >> + }
> >
> > According to my comment above, perhaps we simply don't have to use the
> > "power-domain-names" binding at all.
> I will use genpd->name
>

[...]

Kind regards
Uffe