Hi,
Any comments on this patch?
- Yash
On Wed, Aug 21, 2019 at 2:53 PM Yash Shah <yash.shah@xxxxxxxxxx> wrote:
Add the PWM DT node in SiFive FU540 soc-specific DT file.
Enable the PWM nodes in HiFive Unleashed board-specific DT file.
Signed-off-by: Yash Shah <yash.shah@xxxxxxxxxx>
---
arch/riscv/boot/dts/sifive/fu540-c000.dtsi | 19 +++++++++++++++++++
arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts | 8 ++++++++
2 files changed, 27 insertions(+)
diff --git a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
index 42b5ec2..bb422db 100644
--- a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
+++ b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
@@ -230,6 +230,25 @@
#size-cells = <0>;
status = "disabled";
};
+ pwm0: pwm@10020000 {
+ compatible = "sifive,pwm0";
+ reg = <0x0 0x10020000 0x0 0x1000>;
+ interrupt-parent = <&plic0>;
+ interrupts = <42 43 44 45>;
+ clocks = <&prci PRCI_CLK_TLCLK>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+ pwm1: pwm@10021000 {
+ compatible = "sifive,pwm0";
+ reg = <0x0 0x10021000 0x0 0x1000>;
+ interrupt-parent = <&plic0>;
+ interrupts = <46 47 48 49>;
+ reg-names = "control";
+ clocks = <&prci PRCI_CLK_TLCLK>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
};
};
diff --git a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
index 93d68cb..104d334 100644
--- a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
+++ b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
@@ -85,3 +85,11 @@
reg = <0>;
};
};
+
+&pwm0 {
+ status = "okay";
+};
+
+&pwm1 {
+ status = "okay";
+};
--
1.9.1