[RESEND PATCH v2 0/3] Add driver for veml6030 ambient light sensor

[Rishi Gupta]

The veml6030 is an ambient light sensor from vishay and
is a different hardware from an existing hardware for which
driver currently exist, therefore this driver submission.

* All features; ALS, white channel & power management is
  supported.

* All configurable parameters are supported through standard
  iio sysfs entries. User space can get valid values of any
  parameter (xx_available) and then can write to appropriate
  sysfs entry.

* User space can get ALS & White channel readings through RAW
  IIO interface.

* IIO events are used to notify application whenever threshold
  is crossed. This uses IRQ pin of veml6030.

* Some registers in veml6030 are read only. For these registers
  read callback returns error to user space.

There are 3 patches for this submission:
[PATCH 1/3] iio: light: add driver for veml6030 ambient light sensor
[PATCH 2/3] dt-bindings: iio: light: add veml6030 ALS bindings
[PATCH 3/3] iio: documentation: light: Add veml6030 sysfs documentation

Rishi Gupta (3):
  iio: light: add driver for veml6030 ambient light sensor
  dt-bindings: iio: light: add veml6030 ALS bindings
  iio: documentation: light: Add veml6030 sysfs documentation

 .../ABI/testing/sysfs-bus-iio-light-veml6030       |  49 ++
 .../devicetree/bindings/iio/light/veml6030.yaml    |  62 ++
 drivers/iio/light/Kconfig                          |  11 +
 drivers/iio/light/Makefile                         |   1 +
 drivers/iio/light/veml6030.c                       | 633 +++++++++++++++++++++
 5 files changed, 756 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-light-veml6030
 create mode 100644 Documentation/devicetree/bindings/iio/light/veml6030.yaml
 create mode 100644 drivers/iio/light/veml6030.c

-- 
2.7.4