Re: Alps touchpad generates IRQ storm after S3

[Kai-Heng Feng]

Hi Xiaojian,

> On Aug 28, 2019, at 22:43, Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx> wrote:
> 
> Hi Mario,
> 
> at 21:25, <Mario.Limonciello@xxxxxxxx> <Mario.Limonciello@xxxxxxxx> wrote:
> 
>> KH,
>> 
>> Just make sure I understand details.
>> 
>>> Commit "HID: i2c-hid: Don't reset device upon system resume
>> 
>> If you revert this it's fixed on this system?
> 
> Yes. Once reset is used instead of  the issue is gone.

Do you figure out the correct command to use here?

Kai-Heng

> 
>> 
>> In that commit you had mentioned if this causes problems it might be worth
>> quirking just Raydium but commit afbb1169ed5b58cfca017e368b53e019cf285853
>> confirmed that it helped several other systems too.
>> 
>> If the conclusion from this investigation this is only fixable via touchpad FW update
>> it might be worth quirking this touchpad/touchpad FW/system combination.
> 
> Hopefully thereâs a better solution from ALPS :)
> 
>> 
>>> Also Cc Mario because this could relate to BIOS.
>> 
>> Also I assume this is on current stable BIOS/EC release, right?
> 
> Yes. The BIOS version is 1.10.1.
> 
> The IRQ storm stops as soon as the touchpad gets touched.
> 
> Kai-Heng
> 
>> 
>> Thanks,
>> 
>>> -----Original Message-----
>>> From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
>>> Sent: Wednesday, August 28, 2019 1:58 AM
>>> To: Xiaojian Cao
>>> Cc: Masaki Ota; Limonciello, Mario; open list:HID CORE LAYER; Linux Kernel
>>> Mailing List; Naoki Saito
>>> Subject: Re: Alps touchpad generates IRQ storm after S3
>>> 
>>> 
>>> [EXTERNAL EMAIL]
>>> 
>>> Hi Xiaojian,
>>> 
>>> at 14:51, Xiaojian Cao <xiaojian.cao@xxxxxxxxxxx> wrote:
>>> 
>>>> Hi Ota-san,
>>>> 
>>>> OK, we will look into it.
>>>> 
>>>> 
>>>> Hi Kai-Heng,
>>>> 
>>>> We will try to reproduce this issue first, could you please tell me the
>>>> target Ubuntu version?
>>> 
>>> Itâs distro-agnostic, any distro with mainline Linux can reproduce the issue.
>>> 
>>> Kai-Heng
>>> 
>>>> Best regards,
>>>> Jason
>>>> 
>>>> -----Original Message-----
>>>> From: åç çå Masaki Ota <masaki.ota@xxxxxxxxxxxxxx>
>>>> Sent: Wednesday, August 28, 2019 2:35 PM
>>>> To: æ æå Xiaojian Cao <xiaojian.cao@xxxxxxxxxxx>; Kai-Heng Feng
>>>> <kai.heng.feng@xxxxxxxxxxxxx>
>>>> Cc: Mario Limonciello <mario.limonciello@xxxxxxxx>; open list:HID CORE
>>>> LAYER <linux-input@xxxxxxxxxxxxxxx>; Linux Kernel Mailing List
>>>> <linux-kernel@xxxxxxxxxxxxxxx>; æè çæ Naoki Saito
>>>> <naoki.saito@xxxxxxxxxxxxxx>
>>>> Subject: RE: Alps touchpad generates IRQ storm after S3
>>>> 
>>>> Hi, Kai-Heng,
>>>> 
>>>> Sorry, I'm not in charge of Linux task now.
>>>> 
>>>> Hi, XiaoJian,
>>>> 
>>>> Please check the following mail.
>>>> If you have any question, please ask Kai-Heng.
>>>> 
>>>> Best Regards,
>>>> Masaki Ota
>>>> -----Original Message-----
>>>> From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
>>>> Sent: Wednesday, August 28, 2019 3:22 PM
>>>> To: åç çå Masaki Ota <masaki.ota@xxxxxxxxxxxxxx>
>>>> Cc: Mario Limonciello <mario.limonciello@xxxxxxxx>; open list:HID CORE
>>>> LAYER <linux-input@xxxxxxxxxxxxxxx>; Linux Kernel Mailing List
>>>> <linux-kernel@xxxxxxxxxxxxxxx>
>>>> Subject: Alps touchpad generates IRQ storm after S3
>>>> 
>>>> Hi Masaki,
>>>> 
>>>> The Alps touchpad (044E:1220) on Dell Precision 7530 causes IRQ storm
>>>> after system suspend (S3).
>>>> Commit "HID: i2c-hid: Don't reset device upon system resumeâ which solves
>>>> the same issue for other vendors, cause the issue on Alps touchpad.
>>>> So Iâd like to know the correct command Alps touchpad expects after
>>>> system resume.
>>>> 
>>>> Also Cc Mario because this could relate to BIOS.
>>>> 
>>>> Kai-Heng
> 
>