[PATCH V2 1/1] tick: broadcast-hrtimer: Fix a race in bc_set_next
From: Balasubramani Vivekanandan
Date: Wed Sep 25 2019 - 08:03:35 EST
When a cpu requests broadcasting, before starting the tick broadcast
hrtimer, bc_set_next() checks if the timer callback (bc_handler) is
active using hrtimer_try_to_cancel(). But hrtimer_try_to_cancel() does
not provide the required synchronization when the callback is active on
other core.
The callback could have already executed
tick_handle_oneshot_broadcast() and could have also returned. But still
there is a small time window where the hrtimer_try_to_cancel() returns
-1. In that case bc_set_next() returns without doing anything, but the
next_event of the tick broadcast clock device is already set to a
timeout value.
In the race condition diagram below, CPU #1 is running the timer
callback and CPU #2 is entering idle state and so calls bc_set_next().
In the worst case, the next_event will contain an expiry time, but the
hrtimer will not be started which happens when the racing callback
returns HRTIMER_NORESTART. The hrtimer might never recover if all
further requests from the CPUs to subscribe to tick broadcast have
timeout greater than the next_event of tick broadcast clock device. This
leads to cascading of failures and finally noticed as rcu stall
warnings as shown in [1]
Here is a depiction of the race condition
CPU #1 (Running timer callback) CPU #2 (Enter idle
and subscribe to
tick broadcast)
--------------------- ---------------------
__run_hrtimer() tick_broadcast_enter()
bc_handler() __tick_broadcast_oneshot_control()
tick_handle_oneshot_broadcast()
raw_spin_lock(&tick_broadcast_lock);
dev->next_event = KTIME_MAX; //wait for tick_broadcast_lock
//next_event for tick broadcast clock
set to KTIME_MAX since no other cores
subscribed to tick broadcasting
raw_spin_unlock(&tick_broadcast_lock);
if (dev->next_event == KTIME_MAX)
return HRTIMER_NORESTART
// callback function exits without
restarting the hrtimer //tick_broadcast_lock acquired
raw_spin_lock(&tick_broadcast_lock);
tick_broadcast_set_event()
clockevents_program_event()
dev->next_event = expires;
bc_set_next()
hrtimer_try_to_cancel()
//returns -1 since the timer
callback is active. Exits without
restarting the timer
cpu_base->running = NULL;
Since it is now allowed to start the hrtimer from the callback, there is
no need for the try to cancel logic. All that is now removed.
[1]: rcu stall warnings noticed before this patch
[ 26.477514] INFO: rcu_preempt detected stalls on CPUs/tasks:
[ 26.483197] 4-...: (0 ticks this GP) idle=718/0/0 softirq=1436/1436 fqs=0
[ 26.490171] (detected by 0, t=1755 jiffies, g=778, c=777, q=10243)
[ 26.496456] Task dump for CPU 4:
[ 26.499688] swapper/4 R running task 0 0 1 0x00000020
[ 26.506756] Call trace:
[ 26.509221] [<ffff000008086214>] __switch_to+0x94/0xd8
[ 26.514378] [<ffff000008ed9000>] bp_hardening_data+0x0/0x10
[ 26.519964] rcu_preempt kthread starved for 1762 jiffies! g778 c777 f0x0 RCU_GP_WAIT_FQS(3) ->state=0x402 ->cpu=4
[ 26.530245] rcu_preempt I 0 8 2 0x00000020
[ 26.535742] Call trace:
[ 26.538192] [<ffff000008086214>] __switch_to+0x94/0xd8
[ 26.543344] [<ffff000008a6365c>] __schedule+0x274/0x940
[ 26.548578] [<ffff000008a63d68>] schedule+0x40/0xa8
[ 26.553467] [<ffff000008a6847c>] schedule_timeout+0x94/0x430
[ 26.559141] [<ffff00000813cb04>] rcu_gp_kthread+0x76c/0x1068
[ 26.564813] [<ffff0000080e1610>] kthread+0x138/0x140
[ 26.569787] [<ffff000008084f74>] ret_from_fork+0x10/0x1c
[ 30.481515] INFO: rcu_sched detected stalls on CPUs/tasks:
[ 30.487030] 4-...: (0 ticks this GP) idle=718/0/0 softirq=1436/1436 fqs=0
[ 30.494004] (detected by 1, t=1755 jiffies, g=-24, c=-25, q=45)
[ 30.500028] Task dump for CPU 4:
[ 30.503261] swapper/4 R running task 0 0 1 0x00000020
[ 30.510330] Call trace:
[ 30.512796] [<ffff000008086214>] __switch_to+0x94/0xd8
[ 30.517953] [<ffff000008ed9000>] bp_hardening_data+0x0/0x10
[ 30.523541] rcu_sched kthread starved for 1762 jiffies! g18446744073709551592 c18446744073709551591 f0x0 RCU_GP_WAIT_FQS(3) ->state=0x402 ->cpu=4
[ 30.536608] rcu_sched I 0 9 2 0x00000020
[ 30.542105] Call trace:
[ 30.544554] [<ffff000008086214>] __switch_to+0x94/0xd8
[ 30.549707] [<ffff000008a6365c>] __schedule+0x274/0x940
[ 30.554942] [<ffff000008a63d68>] schedule+0x40/0xa8
[ 30.559830] [<ffff000008a6847c>] schedule_timeout+0x94/0x430
[ 30.565504] [<ffff00000813cb04>] rcu_gp_kthread+0x76c/0x1068
[ 30.571176] [<ffff0000080e1610>] kthread+0x138/0x140
[ 30.576149] [<ffff000008084f74>] ret_from_fork+0x10/0x1c
Signed-off-by: Balasubramani Vivekanandan <balasubramani_vivekanandan@xxxxxxxxxx>
Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
---
kernel/time/tick-broadcast-hrtimer.c | 52 ++++++++++++----------------
1 file changed, 23 insertions(+), 29 deletions(-)
diff --git a/kernel/time/tick-broadcast-hrtimer.c b/kernel/time/tick-broadcast-hrtimer.c
index c1f5bb590b5e..6828fe3baacd 100644
--- a/kernel/time/tick-broadcast-hrtimer.c
+++ b/kernel/time/tick-broadcast-hrtimer.c
@@ -42,39 +42,37 @@ static int bc_shutdown(struct clock_event_device *evt)
*/
static int bc_set_next(ktime_t expires, struct clock_event_device *bc)
{
- int bc_moved;
/*
- * We try to cancel the timer first. If the callback is on
- * flight on some other cpu then we let it handle it. If we
- * were able to cancel the timer nothing can rearm it as we
- * own broadcast_lock.
+ * This is called either from enter/exit idle code or from the
+ * broadcast handler. In all cases tick_broadcast_lock is held.
*
- * However we can also be called from the event handler of
- * ce_broadcast_hrtimer itself when it expires. We cannot
- * restart the timer because we are in the callback, but we
- * can set the expiry time and let the callback return
- * HRTIMER_RESTART.
+ * hrtimer_cancel() cannot be called here neither from the
+ * broadcast handler nor from the enter/exit idle code. The idle
+ * code can run into the problem described in bc_shutdown() and the
+ * broadcast handler cannot wait for itself to complete for obvious
+ * reasons.
*
- * Since we are in the idle loop at this point and because
- * hrtimer_{start/cancel} functions call into tracing,
- * calls to these functions must be bound within RCU_NONIDLE.
+ * Each caller tries to arm the hrtimer on its own CPU, but if the
+ * handler is currently running hrtimer_start() does not move
+ * it. It keeps it on the CPU on which it is assigned at the
+ * moment.
*/
RCU_NONIDLE(
{
- bc_moved = hrtimer_try_to_cancel(&bctimer) >= 0;
- if (bc_moved) {
- hrtimer_start(&bctimer, expires,
- HRTIMER_MODE_ABS_PINNED_HARD);
- }
+ hrtimer_start(&bctimer, expires, HRTIMER_MODE_ABS_PINNED_HARD);
+ /*
+ * The core tick broadcast mode expects bc->bound_on to be set
+ * correctly to prevent a CPU which has the broadcast hrtimer
+ * armed from going deep idle.
+ *
+ * As tick_broadcast_lock is held, nothing can change the
+ * cpu base which was just established in hrtimer_start()
+ * above. So the below access is safe even without holding
+ * the hrtimer base lock.
+ */
+ bc->bound_on = bctimer.base->cpu_base->cpu;
}
);
-
- if (bc_moved) {
- /* Bind the "device" to the cpu */
- bc->bound_on = smp_processor_id();
- } else if (bc->bound_on == smp_processor_id()) {
- hrtimer_set_expires(&bctimer, expires);
- }
return 0;
}
@@ -100,10 +98,6 @@ static enum hrtimer_restart bc_handler(struct hrtimer *t)
{
ce_broadcast_hrtimer.event_handler(&ce_broadcast_hrtimer);
- if (clockevent_state_oneshot(&ce_broadcast_hrtimer))
- if (ce_broadcast_hrtimer.next_event != KTIME_MAX)
- return HRTIMER_RESTART;
-
return HRTIMER_NORESTART;
}
--
2.17.1