Re: [PATCH 00/11] of: Fix DMA configuration for non-DT masters

[Robin Murphy]

On 25/09/2019 15:52, Nicolas Saenz Julienne wrote:
> On Tue, 2019-09-24 at 16:59 -0500, Rob Herring wrote:
> > On Tue, Sep 24, 2019 at 1:12 PM Nicolas Saenz Julienne
> > <nsaenzjulienne@xxxxxxx> wrote:
> > > Hi All,
> > > this series tries to address one of the issues blocking us from
> > > upstreaming Broadcom's STB PCIe controller[1]. Namely, the fact that
> > > devices not represented in DT which sit behind a PCI bus fail to get the
> > > bus' DMA addressing constraints.
> > >
> > > This is due to the fact that of_dma_configure() assumes it's receiving a
> > > DT node representing the device being configured, as opposed to the PCIe
> > > bridge node we currently pass. This causes the code to directly jump
> > > into PCI's parent node when checking for 'dma-ranges' and misses
> > > whatever was set there.
> > >
> > > To address this I create a new API in OF - inspired from Robin Murphys
> > > original proposal[2] - which accepts a bus DT node as it's input in
> > > order to configure a device's DMA constraints. The changes go deep into
> > > of/address.c's implementation, as a device being having a DT node
> > > assumption was pretty strong.
> > >
> > > On top of this work, I also cleaned up of_dma_configure() removing its
> > > redundant arguments and creating an alternative function for the special
> > > cases
> > > not applicable to either the above case or the default usage.
> > >
> > > IMO the resulting functions are more explicit. They will probably
> > > surface some hacky usages that can be properly fixed as I show with the
> > > DT fixes on the Layerscape platform.
> > >
> > > This was also tested on a Raspberry Pi 4 with a custom PCIe driver and
> > > on a Seattle AMD board.
> >
> > Humm, I've been working on this issue too. Looks similar though yours
> > has a lot more churn and there's some other bugs I've found.
>
> That's good news, and yes now that I see it, some stuff on my series is overly
> complicated. Specially around of_translate_*().
>
> On top of that, you removed in of_dma_get_range():
>
> -	/*
> -	 * At least empty ranges has to be defined for parent node if
> -	 * DMA is supported
> -	 */
> -	if (!ranges)
> -		break;
>
> Which I assumed was bound to the standard and makes things easier.
>
> > Can you test out this branch[1]. I don't have any h/w needing this,
> > but wrote a unittest and tested with modified QEMU.
>
> I reviewed everything, I did find a minor issue, see the patch attached.

WRT that patch, the original intent of "force_dma" was purely to 
consider a device DMA-capable regardless of the presence of 
"dma-ranges". Expecting of_dma_configure() to do anything for a non-OF 
device has always been bogus - magic paravirt devices which appear out 
of nowhere and expect to be treated as genuine DMA masters are a 
separate problem that we haven't really approached yet.

Robin.