Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
From: Adam Ford
Date: Thu Sep 26 2019 - 10:13:07 EST
On Thu, Sep 26, 2019 at 1:55 AM Tomi Valkeinen <tomi.valkeinen@xxxxxx> wrote:
>
> On 25/09/2019 23:51, Adam Ford wrote:
>
> >> Has anyone debugged why the hang is happening?
> > I started to debug this, but I got distracted when I noticed the LCD
> > did't work at all on modern kernels. I have that fixed now, so I can
> > go back to investigating this.
> >
> > Working version:
> >
> >
> > I noticed there doesn't seem to be the calculation for setting fck,
> > pck or any of the timings. Are there any more debug options I can
> > enable?
>
> The logs here look very different. The first one doesn't even show the
> DSS rev prints. Can you get full logs for both? And even better, if you
> can build omapdss as a kernel module, and load it after the boot, you
> won't have any "extra" going on at the same time.
Since it's build as a module, I only dumped the stuff starting after
the modules are loading. I can provide more if you want, but I am
trying to avoid excessive noise.
5.3.1 with drivers build as modules:
[ 5.143615] random: udevd: uninitialized urandom read (16 bytes read)
[ 5.153869] random: udevd: uninitialized urandom read (16 bytes read)
[ 5.160522] random: udevd: uninitialized urandom read (16 bytes read)
[ 5.187286] udevd[104]: specified group 'kvm' unknown
[ 5.240875] udevd[105]: starting eudev-3.2.7
[ 6.026672] DSS: set fck to 172800000
[ 6.030487] omapdss_dss 48050000.dss: 48050000.dss supply
vdda_video not found, using dummy regulator
[ 6.084716] omap_ssi 48058000.ssi-controller: ssi controller 0
initialized (2 ports)!
[ 6.093536] omap_ssi_port 4805a000.ssi-port: GPIO lookup for
consumer ti,ssi-cawake
[ 6.101348] omap_ssi_port 4805a000.ssi-port: using device tree for
GPIO lookup
[ 6.108642] of_get_named_gpiod_flags: can't parse
'ti,ssi-cawake-gpios' property of node
'/ocp@68000000/ssi-controller@48058000/ssi-port@4805a000[0]'
[ 6.122131] of_get_named_gpiod_flags: can't parse
'ti,ssi-cawake-gpio' property of node
'/ocp@68000000/ssi-controller@48058000/ssi-port@4805a000[0]'
[ 6.135559] omap_ssi_port 4805a000.ssi-port: using lookup tables
for GPIO lookup
[ 6.143035] omap_ssi_port 4805a000.ssi-port: No GPIO consumer
ti,ssi-cawake found
[ 6.150543] omap_ssi_port 4805a000.ssi-port: couldn't get cawake
gpio (err=-2)!
[ 6.157958] omap_ssi_port: probe of 4805a000.ssi-port failed with error -2
[ 6.164978] omap_ssi_port 4805b000.ssi-port: GPIO lookup for
consumer ti,ssi-cawake
[ 6.172698] omap_ssi_port 4805b000.ssi-port: using device tree for
GPIO lookup
[ 6.179992] of_get_named_gpiod_flags: can't parse
'ti,ssi-cawake-gpios' property of node
'/ocp@68000000/ssi-controller@48058000/ssi-port@4805b000[0]'
[ 6.193481] of_get_named_gpiod_flags: can't parse
'ti,ssi-cawake-gpio' property of node
'/ocp@68000000/ssi-controller@48058000/ssi-port@4805b000[0]'
[ 6.206909] omap_ssi_port 4805b000.ssi-port: using lookup tables
for GPIO lookup
[ 6.214355] omap_ssi_port 4805b000.ssi-port: No GPIO consumer
ti,ssi-cawake found
[ 6.221923] omap_ssi_port 4805b000.ssi-port: couldn't get cawake
gpio (err=-2)!
[ 6.229278] omap_ssi_port: probe of 4805b000.ssi-port failed with error -2
[ 6.265075] at24 2-0050: GPIO lookup for consumer wp
[ 6.270080] at24 2-0050: using device tree for GPIO lookup
[ 6.275756] of_get_named_gpiod_flags: can't parse 'wp-gpios'
property of node '/ocp@68000000/i2c@48060000/at24@50[0]'
[ 6.286499] of_get_named_gpiod_flags: can't parse 'wp-gpio'
property of node '/ocp@68000000/i2c@48060000/at24@50[0]'
[ 6.297119] at24 2-0050: using lookup tables for GPIO lookup
[ 6.302856] at24 2-0050: No GPIO consumer wp found
[ 6.324035] tsc2004 2-0048: GPIO lookup for consumer reset
[ 6.329559] tsc2004 2-0048: using device tree for GPIO lookup
[ 6.335571] of_get_named_gpiod_flags: can't parse 'reset-gpios'
property of node '/ocp@68000000/i2c@48060000/tsc2004@48[0]'
[ 6.346862] of_get_named_gpiod_flags: can't parse 'reset-gpio'
property of node '/ocp@68000000/i2c@48060000/tsc2004@48[0]'
[ 6.358001] tsc2004 2-0048: using lookup tables for GPIO lookup
[ 6.363983] tsc2004 2-0048: No GPIO consumer reset found
[ 6.417541] usbcore: registered new interface driver usbfs
[ 6.423309] usbcore: registered new interface driver hub
[ 6.428802] usbcore: registered new device driver usb
[ 6.474761] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.523010] twl4030_keypad 48070000.i2c:twl@48:keypad: missing or
malformed property linux,keymap: -22
[ 6.532531] twl4030_keypad 48070000.i2c:twl@48:keypad: Failed to build keymap
[ 6.539764] twl4030_keypad: probe of 48070000.i2c:twl@48:keypad
failed with error -22
[ 6.590362] ehci-omap: OMAP-EHCI Host Controller driver
[ 6.596557] ehci-omap 48064800.ehci: EHCI Host Controller
[ 6.602203] ehci-omap 48064800.ehci: new USB bus registered,
assigned bus number 1
[ 6.646911] DSS: set fck to 172800000
[ 6.650848] omapdss_dss 48050000.dss: 48050000.dss supply
vdda_video not found, using dummy regulator
[ 6.730804] at24 2-0050: 8192 byte 24c64 EEPROM, writable, 1 bytes/write
[ 6.756164] input: twl4030_pwrbutton as
/devices/platform/68000000.ocp/48070000.i2c/i2c-0/0-0048/48070000.i2c:twl@48:pwrbutton/input/input2
[ 6.778076] DSS: set fck to 172800000
[ 6.782104] omapdss_dss 48050000.dss: 48050000.dss supply
vdda_video not found, using dummy regulator
[ 6.794891] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.892547] ohci-platform: OHCI generic platform driver
[ 6.898437] ohci-platform 48064400.ohci: Generic Platform OHCI controller
[ 6.905456] ohci-platform 48064400.ohci: new USB bus registered,
assigned bus number 2
[ 6.954040] DSS: set fck to 172800000
[ 6.957824] omapdss_dss 48050000.dss: 48050000.dss supply
vdda_video not found, using dummy regulator
[ 6.968170] input: TSC200X touchscreen as
/devices/platform/68000000.ocp/48060000.i2c/i2c-2/2-0048/input/input0
[ 7.093811] DSS: set fck to 172800000
[ 7.097625] omapdss_dss 48050000.dss: 48050000.dss supply
vdda_video not found, using dummy regulator
[ 7.224639] omap-mailbox 48094000.mailbox: omap mailbox rev 0x40
[ 7.274658] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC
[ 7.292907] DSS: set fck to 172800000
[ 7.297119] omapdss_dss 48050000.dss: 48050000.dss supply
vdda_video not found, using dummy regulator
[ 7.316192] twl_rtc 48070000.i2c:twl@48:rtc: registered as rtc0
[ 7.431549] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver
[ 7.437469] musb-hdrc musb-hdrc.0.auto: new USB bus registered,
assigned bus number 3
[ 7.450439] twl4030_usb 48070000.i2c:twl@48:twl4030-usb:
Initialized TWL4030 USB module
[ 7.526092] usb usb3: New USB device found, idVendor=1d6b,
idProduct=0002, bcdDevice= 5.03
[ 7.534576] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 7.541931] usb usb3: Product: MUSB HDRC host driver
[ 7.546936] usb usb3: Manufacturer: Linux
5.3.1-00003-g848fbc000e72-dirty musb-hcd
[ 7.554595] usb usb3: SerialNumber: musb-hdrc.0.auto
[ 7.590911] Driver for 1-wire Dallas network protocol.
[ 7.640197] DSS: set fck to 172800000
[ 7.644134] omapdss_dss 48050000.dss: 48050000.dss supply
vdda_video not found, using dummy regulator
[ 7.711212] omap_hdq 480b2000.1w: OMAP HDQ Hardware Rev 0.5. Driver
in Interrupt mode
[ 7.722930] mc: Linux media interface: v0.10
[ 7.809753] videodev: Linux video capture interface: v2.00
[ 7.858215] ohci-platform 48064400.ohci: irq 92, io mem 0x48064400
[ 7.875671] hub 3-0:1.0: USB hub found
[ 7.890167] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[ 7.899566] DSS: set fck to 172800000
[ 7.903533] omapdss_dss 48050000.dss: 48050000.dss supply
vdda_video not found, using dummy regulator
[ 7.915832] hub 3-0:1.0: 1 port detected
[ 7.959960] w1_master_driver w1_bus_master1: Attaching one wire
slave 01.000000000000 crc 3d
[ 8.080474] DSS: set fck to 172800000
[ 8.084411] omapdss_dss 48050000.dss: 48050000.dss supply
vdda_video not found, using dummy regulator
[ 8.127838] power_supply bq27000-battery:
power_supply_get_battery_info currently only supports devicetree
[ 8.162322] usb usb2: New USB device found, idVendor=1d6b,
idProduct=0001, bcdDevice= 5.03
[ 8.170654] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 8.178039] usb usb2: Product: Generic Platform OHCI controller
[ 8.184051] usb usb2: Manufacturer: Linux
5.3.1-00003-g848fbc000e72-dirty ohci_hcd
[ 8.191680] usb usb2: SerialNumber: 48064400.ohci
[ 8.202484] ehci-omap 48064800.ehci: irq 93, io mem 0x48064800
[ 8.245422] ehci-omap 48064800.ehci: USB 2.0 started, EHCI 1.00
[ 8.283508] DSS: set fck to 172800000
[ 8.287322] omapdss_dss 48050000.dss: 48050000.dss supply
vdda_video not found, using dummy regulator
[ 8.304565] omap3isp 480bc000.isp: ignoring dependency for device,
assuming no driver
[ 8.312774] omap3isp 480bc000.isp: 480bc000.isp supply vdd-csiphy1
not found, using dummy regulator
[ 8.322143] omap3isp 480bc000.isp: 480bc000.isp supply vdd-csiphy2
not found, using dummy regulator
[ 8.331665] omap3isp 480bc000.isp: Revision 15.0 found
[ 8.337585] omap-iommu 480bd400.mmu: 480bd400.mmu: version 1.1
[ 8.343811] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP
CCP2 was not initialized!
[ 8.502380] DSS: set fck to 172800000
[ 8.506195] omapdss_dss 48050000.dss: 48050000.dss supply
vdda_video not found, using dummy regulator
[ 8.580474] hub 2-0:1.0: USB hub found
[ 8.611572] pwm-backlight backlight: GPIO lookup for consumer enable
[ 8.617980] pwm-backlight backlight: using device tree for GPIO lookup
[ 8.624694] of_get_named_gpiod_flags: parsed 'enable-gpios'
property of node '/backlight[0]' - status (0)
[ 8.634368] gpio gpiochip4: Persistence not supported for GPIO 26
[ 8.640502] no flags found for enable
[ 8.644287] pwm-backlight backlight: backlight supply power not
found, using dummy regulator
[ 8.661285] hub 2-0:1.0: 3 ports detected
[ 8.674255] of_get_named_gpiod_flags: parsed 'gpios' property of
node '/gpio_keys/sysboot2[0]' - status (0)
[ 8.684326] gpio gpiochip0: Persistence not supported for GPIO 2
[ 8.690673] of_get_named_gpiod_flags: parsed 'gpios' property of
node '/gpio_keys/sysboot5[0]' - status (0)
[ 8.700561] gpio gpiochip0: Persistence not supported for GPIO 7
[ 8.706848] of_get_named_gpiod_flags: parsed 'gpios' property of
node '/gpio_keys/gpio1[0]' - status (0)
[ 8.716491] gpio gpiochip5: Persistence not supported for GPIO 21
[ 8.722839] of_get_named_gpiod_flags: parsed 'gpios' property of
node '/gpio_keys/gpio2[0]' - status (0)
[ 8.732421] gpio gpiochip5: Persistence not supported for GPIO 18
[ 8.738983] input: gpio_keys as /devices/platform/gpio_keys/input/input3
[ 8.791473] of_get_named_gpiod_flags: parsed 'gpios' property of
node '/leds/user0[0]' - status (0)
[ 8.812042] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002, bcdDevice= 5.03
[ 8.820373] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 8.827728] usb usb1: Product: EHCI Host Controller
[ 8.832672] usb usb1: Manufacturer: Linux
5.3.1-00003-g848fbc000e72-dirty ehci_hcd
[ 8.840270] usb usb1: SerialNumber: 48064800.ehci
[ 8.903961] no flags found for gpios
[ 8.909759] of_get_named_gpiod_flags: can't parse
'ti,jack-det-gpio' property of node '/sound[0]'
[ 8.919403] of_get_named_gpiod_flags: can't parse
'ti,hs_extmute_gpio' property of node
'/ocp@68000000/i2c@48070000/twl@48/audio/codec[0]'
[ 8.933105] of_get_named_gpiod_flags: parsed 'gpios' property of
node '/leds/led1[0]' - status (0)
[ 8.942230] gpio gpiochip5: Persistence not supported for GPIO 20
[ 8.948364] no flags found for gpios
[ 8.952270] of_get_named_gpiod_flags: parsed 'gpios' property of
node '/leds/led2[0]' - status (0)
[ 8.961334] gpio gpiochip5: Persistence not supported for GPIO 19
[ 8.967468] no flags found for gpios
[ 9.002960] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP
CSI2a was not initialized!
[ 9.035003] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP
CCDC was not initialized!
[ 9.055084] hub 1-0:1.0: USB hub found
[ 9.068878] panel-simple display: display supply power not found,
using dummy regulator
[ 9.077239] panel-simple display: GPIO lookup for consumer enable
[ 9.083465] panel-simple display: using device tree for GPIO lookup
[ 9.089813] of_get_named_gpiod_flags: parsed 'enable-gpios'
property of node '/display[0]' - status (0)
[ 9.099304] gpio gpiochip4: Persistence not supported for GPIO 27
[ 9.115875] hub 1-0:1.0: 3 ports detected
[ 9.120910] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP
preview was not initialized!
[ 9.164428] omap-twl4030 sound: twl4030-hifi <-> 49022000.mcbsp mapping ok
[ 9.187957] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP
resizer was not initialized!
[ 9.244628] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP
AEWB was not initialized!
[ 9.253326] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP
AF was not initialized!
[ 9.261810] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP
histogram was not initialized!
[ 9.332031] pwm-backlight backlight: GPIO lookup for consumer enable
[ 9.338439] pwm-backlight backlight: using device tree for GPIO lookup
[ 9.345184] of_get_named_gpiod_flags: parsed 'enable-gpios'
property of node '/backlight[0]' - status (0)
[ 9.354858] gpio gpiochip4: Persistence not supported for GPIO 26
[ 9.361022] no flags found for enable
[ 9.364776] pwm-backlight backlight: backlight supply power not
found, using dummy regulator
[ 9.376739] panel-simple display: display supply power not found,
using dummy regulator
[ 9.385040] panel-simple display: GPIO lookup for consumer enable
[ 9.391204] panel-simple display: using device tree for GPIO lookup
[ 9.397552] of_get_named_gpiod_flags: parsed 'enable-gpios'
property of node '/display[0]' - status (0)
[ 9.407043] gpio gpiochip4: Persistence not supported for GPIO 27
[ 9.413970] DSS: set fck to 172800000
[ 9.417724] omapdss_dss 48050000.dss: 48050000.dss supply
vdda_video not found, using dummy regulator
[ 9.714416] DSS: dss_runtime_get
[ 9.717773] DSS: dss_restore_context
[ 9.721557] DSS: OMAP DSS rev 2.0
[ 9.724884] DSS: dss_runtime_put
[ 9.728149] DSS: dss_save_context
[ 9.731506] DSS: context saved
[ 9.735382] DSS: dss_restore_context
[ 9.738983] DSS: context restored
[ 9.743286] DISPC: dispc_runtime_get
[ 9.746917] DISPC: fifo(0) threshold (bytes), old 960/1023, new 960/1023
[ 9.753753] DISPC: fifo(1) threshold (bytes), old 960/1023, new 960/1023
[ 9.760498] DISPC: fifo(2) threshold (bytes), old 960/1023, new 960/1023
[ 9.767242] DISPC: dispc_restore_context
[ 9.771301] DISPC: dispc_restore_gamma_tables()
[ 9.775909] DISPC: fifo(0) threshold (bytes), old 960/1023, new 960/1023
[ 9.782714] DISPC: fifo(1) threshold (bytes), old 960/1023, new 960/1023
[ 9.789428] DISPC: fifo(2) threshold (bytes), old 960/1023, new 960/1023
[ 9.796203] omapdss_dispc 48050400.dispc: OMAP DISPC rev 3.0
[ 9.801940] DISPC: dispc_runtime_put
[ 9.805541] DISPC: dispc_save_context
[ 9.809265] DISPC: context saved
[ 9.812744] omapdss_dss 48050000.dss: bound 48050400.dispc (ops
hdmi5_configure [omapdss])
[ 9.839477] mousedev: PS/2 mouse device common for all mice
[ 10.145874] cfg80211: Loading compiled-in X.509 certificates for
regulatory database
[ 10.173217] DSS: dss_save_context
[ 10.176666] DSS: context saved
[ 10.317047] omapdrm omapdrm.0: DMM not available, disable DMM support
[ 10.323730] omapdss_dss 48050000.dss: connect(NULL, 48050000.dss)
[ 10.329864] omapdss_dss 48050000.dss: connect(48050000.dss, NULL)
[ 10.336151] DISPC: dispc_runtime_get
[ 10.339813] DSS: dss_restore_context
[ 10.343475] DSS: context restored
[ 10.346832] DISPC: dispc_runtime_put
[ 10.350433] DISPC: dispc_save_context
[ 10.354156] DISPC: context saved
[ 10.357452] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 10.364135] [drm] No driver support for vblank timestamp query.
[ 10.374847] DSS: dss_save_context
[ 10.378265] DSS: context saved
Sorry for all the nosice, but the working splat with the divider set to 4:
Populating /dev using udev: [ 4.766082] udevd[104]: starting version 3.2.7
[ 4.829711] random: udevd: uninitialized urandom read (16 bytes read)
[ 4.839935] random: udevd: uninitialized urandom read (16 bytes read)
[ 4.847320] random: udevd: uninitialized urandom read (16 bytes read)
[ 4.873870] udevd[104]: specified group 'kvm' unknown
[ 4.926696] udevd[105]: starting eudev-3.2.7
[ 5.715698] DSS: set fck to 172800000
[ 5.719512] omapdss_dss 48050000.dss: 48050000.dss supply
vdda_video not found, using dummy regulator
[ 5.777435] omap_ssi 48058000.ssi-controller: ssi controller 0
initialized (2 ports)!
[ 5.786315] omap_ssi_port 4805a000.ssi-port: GPIO lookup for
consumer ti,ssi-cawake
[ 5.794128] omap_ssi_port 4805a000.ssi-port: using device tree for
GPIO lookup
[ 5.801452] of_get_named_gpiod_flags: can't parse
'ti,ssi-cawake-gpios' property of node
'/ocp@68000000/ssi-controller@48058000/ssi-port@4805a000[0]'
[ 5.814971] of_get_named_gpiod_flags: can't parse
'ti,ssi-cawake-gpio' property of node
'/ocp@68000000/ssi-controller@48058000/ssi-port@4805a000[0]'
[ 5.828369] omap_ssi_port 4805a000.ssi-port: using lookup tables
for GPIO lookup
[ 5.835845] omap_ssi_port 4805a000.ssi-port: No GPIO consumer
ti,ssi-cawake found
[ 5.843414] omap_ssi_port 4805a000.ssi-port: couldn't get cawake
gpio (err=-2)!
[ 5.850769] omap_ssi_port: probe of 4805a000.ssi-port failed with error -2
[ 5.857788] omap_ssi_port 4805b000.ssi-port: GPIO lookup for
consumer ti,ssi-cawake
[ 5.865539] omap_ssi_port 4805b000.ssi-port: using device tree for
GPIO lookup
[ 5.872863] of_get_named_gpiod_flags: can't parse
'ti,ssi-cawake-gpios' property of node
'/ocp@68000000/ssi-controller@48058000/ssi-port@4805b000[0]'
[ 5.886352] of_get_named_gpiod_flags: can't parse
'ti,ssi-cawake-gpio' property of node
'/ocp@68000000/ssi-controller@48058000/ssi-port@4805b000[0]'
[ 5.899780] omap_ssi_port 4805b000.ssi-port: using lookup tables
for GPIO lookup
[ 5.907257] omap_ssi_port 4805b000.ssi-port: No GPIO consumer
ti,ssi-cawake found
[ 5.914794] omap_ssi_port 4805b000.ssi-port: couldn't get cawake
gpio (err=-2)!
[ 5.922180] omap_ssi_port: probe of 4805b000.ssi-port failed with error -2
[ 5.973175] at24 2-0050: GPIO lookup for consumer wp
[ 5.978210] at24 2-0050: using device tree for GPIO lookup
[ 5.983856] of_get_named_gpiod_flags: can't parse 'wp-gpios'
property of node '/ocp@68000000/i2c@48060000/at24@50[0]'
[ 5.994567] of_get_named_gpiod_flags: can't parse 'wp-gpio'
property of node '/ocp@68000000/i2c@48060000/at24@50[0]'
[ 6.005187] at24 2-0050: using lookup tables for GPIO lookup
[ 6.010894] at24 2-0050: No GPIO consumer wp found
[ 6.018280] tsc2004 2-0048: GPIO lookup for consumer reset
[ 6.023956] tsc2004 2-0048: using device tree for GPIO lookup
[ 6.029754] of_get_named_gpiod_flags: can't parse 'reset-gpios'
property of node '/ocp@68000000/i2c@48060000/tsc2004@48[0]'
[ 6.041015] of_get_named_gpiod_flags: can't parse 'reset-gpio'
property of node '/ocp@68000000/i2c@48060000/tsc2004@48[0]'
[ 6.052154] tsc2004 2-0048: using lookup tables for GPIO lookup
[ 6.058105] tsc2004 2-0048: No GPIO consumer reset found
[ 6.159973] usbcore: registered new interface driver usbfs
[ 6.165771] usbcore: registered new interface driver hub
[ 6.171325] usbcore: registered new device driver usb
[ 6.211181] twl4030_keypad 48070000.i2c:twl@48:keypad: missing or
malformed property linux,keymap: -22
[ 6.220550] twl4030_keypad 48070000.i2c:twl@48:keypad: Failed to build keymap
[ 6.227844] twl4030_keypad: probe of 48070000.i2c:twl@48:keypad
failed with error -22
[ 6.242553] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.265563] ohci-platform: OHCI generic platform driver
[ 6.271759] ohci-platform 48064400.ohci: Generic Platform OHCI controller
[ 6.278625] ohci-platform 48064400.ohci: new USB bus registered,
assigned bus number 1
[ 6.420623] input: twl4030_pwrbutton as
/devices/platform/68000000.ocp/48070000.i2c/i2c-0/0-0048/48070000.i2c:twl@48:pwrbutton/input/input2
[ 6.438446] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.445220] Warning! ehci_hcd should always be loaded before
uhci_hcd and ohci_hcd, not after
[ 6.491607] at24 2-0050: 8192 byte 24c64 EEPROM, writable, 1 bytes/write
[ 6.506927] DSS: set fck to 172800000
[ 6.510711] omapdss_dss 48050000.dss: 48050000.dss supply
vdda_video not found, using dummy regulator
[ 6.608886] ehci-omap: OMAP-EHCI Host Controller driver
[ 6.614868] ehci-omap 48064800.ehci: EHCI Host Controller
[ 6.620330] ehci-omap 48064800.ehci: new USB bus registered,
assigned bus number 2
[ 6.647247] input: TSC200X touchscreen as
/devices/platform/68000000.ocp/48060000.i2c/i2c-2/2-0048/input/input0
[ 6.659362] DSS: set fck to 172800000
[ 6.663299] omapdss_dss 48050000.dss: 48050000.dss supply
vdda_video not found, using dummy regulator
[ 6.804473] DSS: set fck to 172800000
[ 6.808288] omapdss_dss 48050000.dss: 48050000.dss supply
vdda_video not found, using dummy regulator
[ 6.890747] ohci-platform 48064400.ohci: irq 92, io mem 0x48064400
[ 6.947784] omap-mailbox 48094000.mailbox: omap mailbox rev 0x40
[ 7.014312] DSS: set fck to 172800000
[ 7.018127] omapdss_dss 48050000.dss: 48050000.dss supply
vdda_video not found, using dummy regulator
[ 7.029022] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC
[ 7.096252] twl_rtc 48070000.i2c:twl@48:rtc: registered as rtc0
[ 7.154327] DSS: set fck to 172800000
[ 7.158111] omapdss_dss 48050000.dss: 48050000.dss supply
vdda_video not found, using dummy regulator
[ 7.168792] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0001, bcdDevice= 5.03
[ 7.177246] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 7.184570] usb usb1: Product: Generic Platform OHCI controller
[ 7.190521] usb usb1: Manufacturer: Linux
5.3.1-00004-g468b8eee984c-dirty ohci_hcd
[ 7.198181] usb usb1: SerialNumber: 48064400.ohci
[ 7.204467] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver
[ 7.235412] Driver for 1-wire Dallas network protocol.
[ 7.282104] omap_hdq 480b2000.1w: OMAP HDQ Hardware Rev 0.5. Driver
in Interrupt mode
[ 7.322814] ehci-omap 48064800.ehci: irq 93, io mem 0x48064800
[ 7.330871] twl4030_usb 48070000.i2c:twl@48:twl4030-usb:
Initialized TWL4030 USB module
[ 7.342529] DSS: set fck to 172800000
[ 7.346435] omapdss_dss 48050000.dss: 48050000.dss supply
vdda_video not found, using dummy regulator
[ 7.375427] ehci-omap 48064800.ehci: USB 2.0 started, EHCI 1.00
[ 7.429779] hub 1-0:1.0: USB hub found
[ 7.433898] hub 1-0:1.0: 3 ports detected
[ 7.458923] DSS: set fck to 172800000
[ 7.462921] omapdss_dss 48050000.dss: 48050000.dss supply
vdda_video not found, using dummy regulator
[ 7.472778] musb-hdrc musb-hdrc.0.auto: new USB bus registered,
assigned bus number 3
[ 7.510559] w1_master_driver w1_bus_master1: Attaching one wire
slave 01.000000000000 crc 3d
[ 7.526550] mc: Linux media interface: v0.10
[ 7.590454] usb usb3: New USB device found, idVendor=1d6b,
idProduct=0002, bcdDevice= 5.03
[ 7.598937] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 7.606231] usb usb3: Product: MUSB HDRC host driver
[ 7.611297] usb usb3: Manufacturer: Linux
5.3.1-00004-g468b8eee984c-dirty musb-hcd
[ 7.618896] usb usb3: SerialNumber: musb-hdrc.0.auto
[ 7.691284] DSS: set fck to 172800000
[ 7.695190] omapdss_dss 48050000.dss: 48050000.dss supply
vdda_video not found, using dummy regulator
[ 7.738800] power_supply bq27000-battery:
power_supply_get_battery_info currently only supports devicetree
[ 7.772583] videodev: Linux video capture interface: v2.00
[ 7.810089] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[ 7.908386] DSS: set fck to 172800000
[ 7.912292] omapdss_dss 48050000.dss: 48050000.dss supply
vdda_video not found, using dummy regulator
[ 8.029205] hub 3-0:1.0: USB hub found
[ 8.077514] hub 3-0:1.0: 1 port detected
[ 8.129760] usb usb2: New USB device found, idVendor=1d6b,
idProduct=0002, bcdDevice= 5.03
[ 8.138305] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 8.145629] usb usb2: Product: EHCI Host Controller
[ 8.150543] usb usb2: Manufacturer: Linux
5.3.1-00004-g468b8eee984c-dirty ehci_hcd
[ 8.158172] usb usb2: SerialNumber: 48064800.ehci
[ 8.201690] omap3isp 480bc000.isp: ignoring dependency for device,
assuming no driver
[ 8.209808] omap3isp 480bc000.isp: 480bc000.isp supply vdd-csiphy1
not found, using dummy regulator
[ 8.219207] omap3isp 480bc000.isp: 480bc000.isp supply vdd-csiphy2
not found, using dummy regulator
[ 8.228729] omap3isp 480bc000.isp: Revision 15.0 found
[ 8.234710] omap-iommu 480bd400.mmu: 480bd400.mmu: version 1.1
[ 8.240844] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP
CCP2 was not initialized!
[ 8.268341] DSS: set fck to 172800000
[ 8.272338] omapdss_dss 48050000.dss: 48050000.dss supply
vdda_video not found, using dummy regulator
[ 8.372863] pwm-backlight backlight: GPIO lookup for consumer enable
[ 8.379272] pwm-backlight backlight: using device tree for GPIO lookup
[ 8.386047] of_get_named_gpiod_flags: parsed 'enable-gpios'
property of node '/backlight[0]' - status (0)
[ 8.395751] gpio gpiochip4: Persistence not supported for GPIO 26
[ 8.401916] no flags found for enable
[ 8.405639] pwm-backlight backlight: backlight supply power not
found, using dummy regulator
[ 8.437988] of_get_named_gpiod_flags: parsed 'gpios' property of
node '/gpio_keys/sysboot2[0]' - status (0)
[ 8.448120] gpio gpiochip0: Persistence not supported for GPIO 2
[ 8.454620] of_get_named_gpiod_flags: parsed 'gpios' property of
node '/gpio_keys/sysboot5[0]' - status (0)
[ 8.464477] gpio gpiochip0: Persistence not supported for GPIO 7
[ 8.470733] of_get_named_gpiod_flags: parsed 'gpios' property of
node '/gpio_keys/gpio1[0]' - status (0)
[ 8.480346] gpio gpiochip5: Persistence not supported for GPIO 21
[ 8.486694] of_get_named_gpiod_flags: parsed 'gpios' property of
node '/gpio_keys/gpio2[0]' - status (0)
[ 8.496307] gpio gpiochip5: Persistence not supported for GPIO 18
[ 8.502868] input: gpio_keys as /devices/platform/gpio_keys/input/input3
[ 8.555450] of_get_named_gpiod_flags: parsed 'gpios' property of
node '/leds/user0[0]' - status (0)
[ 8.614593] of_get_named_gpiod_flags: can't parse
'ti,jack-det-gpio' property of node '/sound[0]'
[ 8.624176] of_get_named_gpiod_flags: can't parse
'ti,hs_extmute_gpio' property of node
'/ocp@68000000/i2c@48070000/twl@48/audio/codec[0]'
[ 8.655914] hub 2-0:1.0: USB hub found
[ 8.671874] hub 2-0:1.0: 3 ports detected
[ 8.738494] no flags found for gpios
[ 8.746582] of_get_named_gpiod_flags: parsed 'gpios' property of
node '/leds/led1[0]' - status (0)
[ 8.755798] gpio gpiochip5: Persistence not supported for GPIO 20
[ 8.761993] no flags found for gpios
[ 8.765838] of_get_named_gpiod_flags: parsed 'gpios' property of
node '/leds/led2[0]' - status (0)
[ 8.774902] gpio gpiochip5: Persistence not supported for GPIO 19
[ 8.781066] no flags found for gpios
[ 8.815582] panel-simple display: display supply power not found,
using dummy regulator
[ 8.823944] panel-simple display: GPIO lookup for consumer enable
[ 8.830078] panel-simple display: using device tree for GPIO lookup
[ 8.836517] of_get_named_gpiod_flags: parsed 'enable-gpios'
property of node '/display[0]' - status (0)
[ 8.846038] gpio gpiochip4: Persistence not supported for GPIO 27
[ 8.863037] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP
CSI2a was not initialized!
[ 8.880096] omap-twl4030 sound: twl4030-hifi <-> 49022000.mcbsp mapping ok
[ 8.909973] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP
CCDC was not initialized!
[ 8.955505] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP
preview was not initialized!
[ 8.996673] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP
resizer was not initialized!
[ 9.024017] pwm-backlight backlight: GPIO lookup for consumer enable
[ 9.030426] pwm-backlight backlight: using device tree for GPIO lookup
[ 9.037170] of_get_named_gpiod_flags: parsed 'enable-gpios'
property of node '/backlight[0]' - status (0)
[ 9.046813] gpio gpiochip4: Persistence not supported for GPIO 26
[ 9.052978] no flags found for enable
[ 9.056701] pwm-backlight backlight: backlight supply power not
found, using dummy regulator
[ 9.068450] panel-simple display: display supply power not found,
using dummy regulator
[ 9.076690] panel-simple display: GPIO lookup for consumer enable
[ 9.082855] panel-simple display: using device tree for GPIO lookup
[ 9.089202] of_get_named_gpiod_flags: parsed 'enable-gpios'
property of node '/display[0]' - status (0)
[ 9.098693] gpio gpiochip4: Persistence not supported for GPIO 27
[ 9.105438] DSS: set fck to 172800000
[ 9.109191] omapdss_dss 48050000.dss: 48050000.dss supply
vdda_video not found, using dummy regulator
[ 9.139343] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP
AEWB was not initialized!
[ 9.148101] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP
AF was not initialized!
[ 9.156555] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP
histogram was not initialized!
[ 9.296691] mousedev: PS/2 mouse device common for all mice
[ 9.480438] DSS: dss_runtime_get
[ 9.483886] DSS: dss_restore_context
[ 9.487487] DSS: OMAP DSS rev 2.0
[ 9.490814] DSS: dss_runtime_put
[ 9.494140] DSS: dss_save_context
[ 9.497467] DSS: context saved
[ 9.501251] DSS: dss_restore_context
[ 9.504852] DSS: context restored
[ 9.508941] DISPC: dispc_runtime_get
[ 9.512725] DISPC: fifo(0) threshold (bytes), old 960/1023, new 960/1023
[ 9.519470] DISPC: fifo(1) threshold (bytes), old 960/1023, new 960/1023
[ 9.526275] DISPC: fifo(2) threshold (bytes), old 960/1023, new 960/1023
[ 9.533020] DISPC: dispc_restore_context
[ 9.536987] DISPC: dispc_restore_gamma_tables()
[ 9.541564] DISPC: fifo(0) threshold (bytes), old 960/1023, new 960/1023
[ 9.548309] DISPC: fifo(1) threshold (bytes), old 960/1023, new 960/1023
[ 9.555053] DISPC: fifo(2) threshold (bytes), old 960/1023, new 960/1023
[ 9.561828] omapdss_dispc 48050400.dispc: OMAP DISPC rev 3.0
[ 9.567504] DISPC: dispc_runtime_put
[ 9.571136] DISPC: dispc_save_context
[ 9.574829] DISPC: context saved
[ 9.578247] omapdss_dss 48050000.dss: bound 48050400.dispc (ops
hdmi5_configure [omapdss])
[ 9.709533] cfg80211: Loading compiled-in X.509 certificates for
regulatory database
[ 9.781860] DSS: dss_save_context
[ 9.785278] DSS: context saved
[ 9.967437] omapdrm omapdrm.0: DMM not available, disable DMM support
[ 9.974121] omapdss_dss 48050000.dss: connect(NULL, 48050000.dss)
[ 9.980255] omapdss_dss 48050000.dss: connect(48050000.dss, NULL)
[ 9.986541] DISPC: dispc_runtime_get
[ 9.990203] DSS: dss_restore_context
[ 9.993865] DSS: context restored
[ 9.997222] DISPC: dispc_runtime_put
[ 10.000793] DISPC: dispc_save_context
[ 10.004547] DISPC: context saved
[ 10.007843] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 10.014526] [drm] No driver support for vblank timestamp query.
[ 10.022430] DSS: dss_save_context
[ 10.025787] DSS: context saved
[ 10.059051] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 10.076721] DISPC: dispc_runtime_get
[ 10.076812] DSS: dss_restore_context
[ 10.076812] DSS: context restored
[ 10.076873] DPI: dpi_set_timings
[ 10.076904] DISPC: dispc_ovl_setup 0, pa 0x8e900000, pa_uv
0x00000000, sw 480, 0,0, 480x272 -> 480x272, cmode 34325258, rot 1,
chan 0 repl 1
[ 10.076904] DISPC: scrw 480, width 480
[ 10.076904] DISPC: offset0 0, offset1 0, row_inc 1, pix_inc 1
[ 10.076934] DISPC: 0,0 480x272 -> 480x272
[ 10.076934] DISPC: dispc_enable_plane 0, 1
[ 10.076934] DISPC: dispc_runtime_get
[ 10.076995] DISPC: dispc_runtime_get
[ 10.076995] DSS: set fck to 36000000
[ 10.077026] DISPC: lck = 36000000 (1)
[ 10.077026] DISPC: pck = 9000000 (4)
[ 10.079132] DISPC: channel 0 xres 480 yres 272
[ 10.079132] DISPC: pck 9000000
[ 10.079132] DISPC: hsync_len 42 hfp 3 hbp 2 vsw 11 vfp 2 vbp 3
[ 10.079162] DISPC: vsync_level 1 hsync_level 1 data_pclk_edge 1
de_level 1 sync_pclk_edge -1
[ 10.079162] DISPC: hsync 17077Hz, vsync 59Hz
[ 10.564025] DISPC: dispc_runtime_put
[ 10.564147] Console: switching to colour frame buffer device 60x34
[ 10.564514] DISPC: dispc_runtime_get
[ 10.564575] DISPC: dispc_ovl_setup 0, pa 0x8e900000, pa_uv
0x00000000, sw 480, 0,0, 480x272 -> 480x272, cmode 34325258, rot 1,
chan 0 repl 1
[ 10.564605] DISPC: scrw 480, width 480
[ 10.564636] DISPC: offset0 0, offset1 0, row_inc 1, pix_inc 1
[ 10.564666] DISPC: 0,0 480x272 -> 480x272
[ 10.564666] DISPC: dispc_enable_plane 0, 1
[ 10.564697] DISPC: GO LCD
[ 10.568481] DISPC: dispc_runtime_put
[ 10.718139] omapdrm omapdrm.0: fb0: omapdrmdrmfb frame buffer device
[ 10.726226] [drm] Initialized omapdrm 1.0.0 20110917 for omapdrm.0 on minor 0
done
Initializing random number generator... [ 10.828277] urandom_read: 1
callbacks suppressed
[ 10.828277] random: dd: uninitialized urandom read (512 bytes read)
done.
Starting system message bus: [ 10.896789] random: dbus-uuidgen:
uninitialized urandom read (12 bytes read)
[ 10.904510] random: dbus-uuidgen: uninitialized urandom read (8 bytes read)
done
Starting network: OK
Welcome to Buildroot
buildroot login: [ 11.284576] wlcore: WARNING Detected unconfigured
mac address in nvs, derive from fuse instead.
[ 11.293518] wlcore: WARNING Your device performance is not optimized.
[ 11.299987] wlcore: WARNING Please use the calibrator tool to
configure your device.
[ 11.313751] wlcore: loaded
[ 11.761871] DISPC: dispc_runtime_get
[ 11.765563] DISPC: dispc_ovl_setup 0, pa 0x8e900000, pa_uv
0x00000000, sw 480, 0,0, 480x272 -> 480x272, cmode 34325258, rot 1,
chan 0 repl 1
[ 11.778472] DISPC: scrw 480, width 480
[ 11.782348] DISPC: offset0 0, offset1 0, row_inc 1, pix_inc 1
[ 11.788177] DISPC: 0,0 480x272 -> 480x272
[ 11.792297] DISPC: dispc_enable_plane 0, 1
[ 11.796447] DISPC: GO LCD
[ 11.803985] DISPC: dispc_runtime_put
>
> And what is the hdmi5_configure there? I don't see anything in the
> driver that would print hdmi5_configure. And, of course, there's no
> hdmi5 on that platform. Hmm, ok... it's from component.c, using "%ps".
> Somehow that goes wrong. Which is a bit alarming, but perhaps a totally
> different issue.
I'll try to take a look later. For Logic PD distributions, we create
a custom defconfig with all those drivers removed, so I'm not worked
up about it, but it would be nice to not call drivers that don't
exist.
>
> The hang happens at an odd time. The last line shows that the driver has
> managed to do its work at suspend time. Afaics, the only thing the
> driver does after that is calling pinctrl_pm_select_sleep_state(). You
> could add a print after that to be sure that goes fine. But I suspect it
> does.
>
> Which then hints that the hang is somewhere outside the driver, in
> omap_device perhaps?
Thanks for reviewing this. I've been coping for a while by manually
changing the config option, but with 5.4 being the expected next LTS,
I was hoping to address this so I don't have to keep working around
it.
>
> You could try adding an extra call to dss_runtime_get(). Say, at the
> beginning of dss_probe_hardware(), do another dss_runtime_get(). That
> should force DSS to be always on (until reboot). runtime PM suspend
> related bugs should disappear.
I'll send out a second e-mail with some of your suggestions, but I
don't want to litter this e-mail with too many logs.
adam
>
> Tomi
>
> --
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki