[PATCH v4 0/3] dmaengine: bindings/edma: dma-channel-mask to array

[Peter Ujfalusi]

Hi,

Changes since v3:
- Update the dma-common.yaml and edma binding documentation according to Rob's
  suggestion

Changes since v2:
- Fix dma-common.yaml documentation patch and extend the description of the
  dma-channel-mask array
- The edma documentation now includes information on the dma-channel-mask array
  size for EDMAs with 32 or 64 channels

Changes since v1:
- Extend the common dma-channel-mask to uint32-array to be usable for
  controllers with more than 32 channels
- Use the dma-channel-mask instead custom property for available channels for
  EDMA.

The original patch was part of the EDMA multicore usage series.

Rob: I'm not sure if I got the dma-common.yaml update correctly...

EDMAs can have 32 or 64 channels depending on the SoC, the dma-channel-mask
needs to be an array to be usable for the driver.

Regards,
Peter
---
Peter Ujfalusi (3):
  dt-bindings: dmaengine: dma-common: Change dma-channel-mask to
    uint32-array
  dt-bindings: dma: ti-edma: Document dma-channel-mask for EDMA
  dmaengine: ti: edma: Add support for handling reserved channels

 .../devicetree/bindings/dma/dma-common.yaml   |  9 ++-
 .../devicetree/bindings/dma/ti-edma.txt       |  8 +++
 drivers/dma/ti/edma.c                         | 59 +++++++++++++++++--
 3 files changed, 69 insertions(+), 7 deletions(-)

-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki