Re: [PATCH v1] net: phy: at803x: add ar9331 support

[Andrew Lunn]

On Mon, Sep 30, 2019 at 11:27:10AM +0200, Oleksij Rempel wrote:
> Mostly this hardware can work with generic PHY driver, but this change
> is needed to provided interrupt handling support.
> Tested with dsa ar9331-switch driver.
> 
> Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
> ---
>  drivers/net/phy/at803x.c | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
> index 6ad8b1c63c34..d62a77adb8e7 100644
> --- a/drivers/net/phy/at803x.c
> +++ b/drivers/net/phy/at803x.c
> @@ -53,6 +53,7 @@
>  #define AT803X_DEBUG_REG_5			0x05
>  #define AT803X_DEBUG_TX_CLK_DLY_EN		BIT(8)
>  
> +#define AR9331_PHY_ID 0x004dd041
>  #define ATH8030_PHY_ID 0x004dd076
>  #define ATH8031_PHY_ID 0x004dd074
>  #define ATH8035_PHY_ID 0x004dd072

Hi Oleksij

I wonder if we should call this ATH9331_PHY_ID, to keep with the
naming convention? Why did you choose AR, not ATH?

Thanks
	Andrew