Re: [PATCH v2 2/4] dt-bindings: snps,dw-apb-ssi: Add optional clock domain information

[Rob Herring]

On Wed, Sep 18, 2019 at 09:04:34AM +0100, Gareth Williams wrote:
> Note in the bindings documentation that pclk should be renamed if a clock
> domain is used to enable the optional bus clock.
> 
> Signed-off-by: Gareth Williams <gareth.williams.jx@xxxxxxxxxxx>
> ---
> v2: Introduced this patch.
> ---
>  Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
> index f54c8c3..3ed08ee 100644
> --- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
> +++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
> @@ -16,7 +16,8 @@ Required properties:
>  Optional properties:
>  - clock-names : Contains the names of the clocks:
>      "ssi_clk", for the core clock used to generate the external SPI clock.
> -    "pclk", the interface clock, required for register access.
> +    "pclk", the interface clock, required for register access. If a clock domain
> +     used to enable this clock then it should be named "pclk_clkdomain".

What's a clock domain?

Unless this is a h/w difference in the IP block, then this change 
doesn't make sense.

>  - cs-gpios : Specifies the gpio pins to be used for chipselects.
>  - num-cs : The number of chipselects. If omitted, this will default to 4.
>  - reg-io-width : The I/O register width (in bytes) implemented by this
> -- 
> 2.7.4
>