[PATCH v3 3/3] mfd: madera: Add support for requesting the supply clocks
From: Charles Keepax
Date: Tue Oct 01 2019 - 09:46:26 EST
Add the ability to get the clock for each clock input pin of the chip
and enable MCLK2 since that is expected to be a permanently enabled
32kHz clock.
Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
---
Changes since v2:
- Use new devm_clk_bulk_get_optional API
Thanks,
Charles
drivers/mfd/madera-core.c | 27 ++++++++++++++++++++++++++-
include/linux/mfd/madera/core.h | 11 +++++++++++
2 files changed, 37 insertions(+), 1 deletion(-)
diff --git a/drivers/mfd/madera-core.c b/drivers/mfd/madera-core.c
index 29540cbf75934..88d904eb016ea 100644
--- a/drivers/mfd/madera-core.c
+++ b/drivers/mfd/madera-core.c
@@ -450,6 +450,21 @@ int madera_dev_init(struct madera *madera)
sizeof(madera->pdata));
}
+ madera->mclk[MADERA_MCLK1].id = "mclk1";
+ madera->mclk[MADERA_MCLK2].id = "mclk2";
+ madera->mclk[MADERA_MCLK3].id = "mclk3";
+
+ ret = devm_clk_bulk_get_optional(madera->dev, ARRAY_SIZE(madera->mclk),
+ madera->mclk);
+ if (ret) {
+ dev_err(madera->dev, "Failed to get clocks: %d\n", ret);
+ return ret;
+ }
+
+ /* Not using devm_clk_get to prevent breakage of existing DTs */
+ if (!madera->mclk[MADERA_MCLK2].clk)
+ dev_warn(madera->dev, "Missing MCLK2, requires 32kHz clock\n");
+
ret = madera_get_reset_gpio(madera);
if (ret)
return ret;
@@ -660,13 +675,19 @@ int madera_dev_init(struct madera *madera)
}
/* Init 32k clock sourced from MCLK2 */
+ ret = clk_prepare_enable(madera->mclk[MADERA_MCLK2].clk);
+ if (ret != 0) {
+ dev_err(madera->dev, "Failed to enable 32k clock: %d\n", ret);
+ goto err_reset;
+ }
+
ret = regmap_update_bits(madera->regmap,
MADERA_CLOCK_32K_1,
MADERA_CLK_32K_ENA_MASK | MADERA_CLK_32K_SRC_MASK,
MADERA_CLK_32K_ENA | MADERA_32KZ_MCLK2);
if (ret) {
dev_err(madera->dev, "Failed to init 32k clock: %d\n", ret);
- goto err_reset;
+ goto err_clock;
}
pm_runtime_set_active(madera->dev);
@@ -687,6 +708,8 @@ int madera_dev_init(struct madera *madera)
err_pm_runtime:
pm_runtime_disable(madera->dev);
+err_clock:
+ clk_disable_unprepare(madera->mclk[MADERA_MCLK2].clk);
err_reset:
madera_enable_hard_reset(madera);
regulator_disable(madera->dcvdd);
@@ -713,6 +736,8 @@ int madera_dev_exit(struct madera *madera)
*/
pm_runtime_disable(madera->dev);
+ clk_disable_unprepare(madera->mclk[MADERA_MCLK2].clk);
+
regulator_disable(madera->dcvdd);
regulator_put(madera->dcvdd);
diff --git a/include/linux/mfd/madera/core.h b/include/linux/mfd/madera/core.h
index 7ffa696cce7ca..ad2c138105d4b 100644
--- a/include/linux/mfd/madera/core.h
+++ b/include/linux/mfd/madera/core.h
@@ -8,6 +8,7 @@
#ifndef MADERA_CORE_H
#define MADERA_CORE_H
+#include <linux/clk.h>
#include <linux/gpio/consumer.h>
#include <linux/interrupt.h>
#include <linux/mfd/madera/pdata.h>
@@ -29,6 +30,13 @@ enum madera_type {
CS42L92 = 9,
};
+enum {
+ MADERA_MCLK1,
+ MADERA_MCLK2,
+ MADERA_MCLK3,
+ MADERA_NUM_MCLK
+};
+
#define MADERA_MAX_CORE_SUPPLIES 2
#define MADERA_MAX_GPIOS 40
@@ -155,6 +163,7 @@ struct snd_soc_dapm_context;
* @irq_dev: the irqchip child driver device
* @irq_data: pointer to irqchip data for the child irqchip driver
* @irq: host irq number from SPI or I2C configuration
+ * @mclk: Structure holding clock supplies
* @out_clamp: indicates output clamp state for each analogue output
* @out_shorted: indicates short circuit state for each analogue output
* @hp_ena: bitflags of enable state for the headphone outputs
@@ -184,6 +193,8 @@ struct madera {
struct regmap_irq_chip_data *irq_data;
int irq;
+ struct clk_bulk_data mclk[MADERA_NUM_MCLK];
+
unsigned int num_micbias;
unsigned int num_childbias[MADERA_MAX_MICBIAS];
--
2.11.0