[PATCH] hwmon: (pmbus) add VR12/VR13 mode support write paths

[Patrick Williams]

pmbus_core supported VR11/VR12/VR13 modes when reading
VID-formatted registers, but the write path only supported
VR11 translations.  Add support for VR12 and VR13 to
'data2reg_vid' for translating these formats.  This is the
inverse of 'reg2data_vid'.

Signed-off-by: Patrick Williams <alpawi@xxxxxxxxxx>
---
 drivers/hwmon/pmbus/pmbus_core.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
index 8470097907bc..f0d696552142 100644
--- a/drivers/hwmon/pmbus/pmbus_core.c
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -845,9 +845,19 @@ static u16 pmbus_data2reg_direct(struct pmbus_data *data,
 static u16 pmbus_data2reg_vid(struct pmbus_data *data,
 			      struct pmbus_sensor *sensor, long val)
 {
-	val = clamp_val(val, 500, 1600);
+	switch (data->info->vrm_version) {
+	case vr11:
+		val = clamp_val(val, 500, 1600);
+		return 2 + DIV_ROUND_CLOSEST((1600 - val) * 100, 625);
+	case vr12:
+		val = clamp_val(val, 0, 1520);
+		return ((val - 250) / 5) + 1;
+	case vr13:
+		val = clamp_val(val, 0, 2500);
+		return ((val - 500) / 10) + 1;
+	}
 
-	return 2 + DIV_ROUND_CLOSEST((1600 - val) * 100, 625);
+	return 0;
 }
 
 static u16 pmbus_data2reg(struct pmbus_data *data,
-- 
2.17.2 (Apple Git-113)