Re: [PATCH v2 3/3] net: phy: at803x: remove probe and struct at803x_priv

[Heiner Kallweit]

On 01.10.2019 08:08, Oleksij Rempel wrote:
> struct at803x_priv is never used in this driver. So remove it
> and the probe function allocating it.
> 
> Suggested-by: Heiner Kallweit <hkallweit1@xxxxxxxxx>
> Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
> ---
>  drivers/net/phy/at803x.c | 21 ---------------------
>  1 file changed, 21 deletions(-)
> 
> diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
> index 42492f83c8d7..e64f77e152f4 100644
> --- a/drivers/net/phy/at803x.c
> +++ b/drivers/net/phy/at803x.c
> @@ -63,10 +63,6 @@ MODULE_DESCRIPTION("Atheros 803x PHY driver");
>  MODULE_AUTHOR("Matus Ujhelyi");
>  MODULE_LICENSE("GPL");
>  
> -struct at803x_priv {
> -	bool phy_reset:1;
> -};
> -
>  struct at803x_context {
>  	u16 bmcr;
>  	u16 advertise;
> @@ -232,20 +228,6 @@ static int at803x_resume(struct phy_device *phydev)
>  	return phy_modify(phydev, MII_BMCR, BMCR_PDOWN | BMCR_ISOLATE, 0);
>  }
>  
> -static int at803x_probe(struct phy_device *phydev)
> -{
> -	struct device *dev = &phydev->mdio.dev;
> -	struct at803x_priv *priv;
> -
> -	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> -	if (!priv)
> -		return -ENOMEM;
> -
> -	phydev->priv = priv;
> -
> -	return 0;
> -}
> -
>  static int at803x_config_init(struct phy_device *phydev)
>  {
>  	int ret;
> @@ -367,7 +349,6 @@ static struct phy_driver at803x_driver[] = {
>  	/* ATHEROS 8035 */
>  	PHY_ID_MATCH_EXACT(ATH8035_PHY_ID),
>  	.name			= "Atheros 8035 ethernet",
> -	.probe			= at803x_probe,
>  	.config_init		= at803x_config_init,
>  	.set_wol		= at803x_set_wol,
>  	.get_wol		= at803x_get_wol,
> @@ -380,7 +361,6 @@ static struct phy_driver at803x_driver[] = {
>  	/* ATHEROS 8030 */
>  	PHY_ID_MATCH_EXACT(ATH8030_PHY_ID),
>  	.name			= "Atheros 8030 ethernet",
> -	.probe			= at803x_probe,
>  	.config_init		= at803x_config_init,
>  	.link_change_notify	= at803x_link_change_notify,
>  	.set_wol		= at803x_set_wol,
> @@ -394,7 +374,6 @@ static struct phy_driver at803x_driver[] = {
>  	/* ATHEROS 8031 */
>  	PHY_ID_MATCH_EXACT(ATH8031_PHY_ID),
>  	.name			= "Atheros 8031 ethernet",
> -	.probe			= at803x_probe,
>  	.config_init		= at803x_config_init,
>  	.set_wol		= at803x_set_wol,
>  	.get_wol		= at803x_get_wol,
> 

Reviewed-by: Heiner Kallweit <hkallweit1@xxxxxxxxx>