[PATCH 2/3] PCI: pciehp: Wait for PDS if in-band presence is disabled

[Stuart Hayes]

When inband presence is disabled, PDS may come up at any time, or not
at all. PDS being low may indicate that the card is still mating, and
we could expect contact bounce to bring down the link as well.

It is reasonable to assume that most cards will mate in a hotplug slot
in about a second. Thus, when we know PDS only reflects out-of-band
presence, it's worthwhile to wait the extra second or so to make sure
the card is properly mated before loading the driver, and to prevent
the hotplug code from disabling a device if the presence detect change
goes active after the device is enabled.

Signed-off-by: Stuart Hayes <stuart.w.hayes@xxxxxxxxx>
---
 drivers/pci/hotplug/pciehp_hpc.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index dc109d521f30..1282641c6458 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -242,6 +242,25 @@ static bool pci_bus_check_dev(struct pci_bus *bus, int devfn)
 	return found;
 }
 
+static void pcie_wait_for_presence(struct pci_dev *pdev)
+{
+	int timeout = 1250;
+	bool pds;
+	u16 slot_status;
+
+	while (true) {
+		pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status);
+		pds = !!(slot_status & PCI_EXP_SLTSTA_PDS);
+		if (pds || timeout <= 0)
+			break;
+		msleep(10);
+		timeout -= 10;
+	}
+
+	if (!pds)
+		pci_info(pdev, "Presence Detect state not set in 1250 msec\n");
+}
+
 int pciehp_check_link_status(struct controller *ctrl)
 {
 	struct pci_dev *pdev = ctrl_dev(ctrl);
@@ -251,6 +270,9 @@ int pciehp_check_link_status(struct controller *ctrl)
 	if (!pcie_wait_for_link(pdev, true))
 		return -1;
 
+	if (ctrl->inband_presence_disabled)
+		pcie_wait_for_presence(pdev);
+
 	found = pci_bus_check_dev(ctrl->pcie->port->subordinate,
 					PCI_DEVFN(0, 0));
 
-- 
2.18.1