Re: [PATCH] dt-bindings: display: imx: fix native-mode setting

[Rob Herring]

On Wed, Sep 18, 2019 at 09:38:53PM +0200, Martin Kaiser wrote:
> According to
> Documentation/devicetree/bindings/display/panel/display-timing.txt,
> native-mode is a property of the display-timings node.
> 
> If it's located outside of display-timings, the native-mode setting is
> ignored and the first display timing is used.
> 
> We've already fixed the board definitions which got this wrong. Fix the
> example in the imx framebuffer bindings as well.
> 
> Signed-off-by: Martin Kaiser <martin@xxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)

Please also fix 
Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt

> 
> diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
> index e5a8b363d829..f4df9e83bcd2 100644
> --- a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
> +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
> @@ -38,10 +38,10 @@ Example:
>  
>  	display0: display0 {
>  		model = "Primeview-PD050VL1";
> -		native-mode = <&timing_disp0>;
>  		bits-per-pixel = <16>;
>  		fsl,pcr = <0xf0c88080>;	/* non-standard but required */
>  		display-timings {
> +			native-mode = <&timing_disp0>;
>  			timing_disp0: 640x480 {
>  				hactive = <640>;
>  				vactive = <480>;
> -- 
> 2.11.0
>