[PATCH 1/4] iio: pressure: bmp280: use bulk regulator ops

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>

The vddd and vdda supplies are always operated on together. We can
shrink the code a bit by using the bulk regulator helpers.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
---
 drivers/iio/pressure/bmp280-core.c | 69 +++++++++++++-----------------
 1 file changed, 30 insertions(+), 39 deletions(-)

diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c
index 8d0f15f27dc5..c21f8ce7b09c 100644
--- a/drivers/iio/pressure/bmp280-core.c
+++ b/drivers/iio/pressure/bmp280-core.c
@@ -74,6 +74,12 @@ struct bmp280_calib {
 	s8  H6;
 };
 
+static const char *const bmp280_supply_names[] = {
+	"vddd", "vdda"
+};
+
+#define BMP280_NUM_SUPPLIES ARRAY_SIZE(bmp280_supply_names)
+
 struct bmp280_data {
 	struct device *dev;
 	struct mutex lock;
@@ -85,8 +91,7 @@ struct bmp280_data {
 		struct bmp180_calib bmp180;
 		struct bmp280_calib bmp280;
 	} calib;
-	struct regulator *vddd;
-	struct regulator *vdda;
+	struct regulator_bulk_data supplies[BMP280_NUM_SUPPLIES];
 	unsigned int start_up_time; /* in microseconds */
 
 	/* log of base 2 of oversampling rate */
@@ -1033,27 +1038,23 @@ int bmp280_common_probe(struct device *dev,
 	}
 
 	/* Bring up regulators */
-	data->vddd = devm_regulator_get(dev, "vddd");
-	if (IS_ERR(data->vddd)) {
-		dev_err(dev, "failed to get VDDD regulator\n");
-		return PTR_ERR(data->vddd);
-	}
-	ret = regulator_enable(data->vddd);
+	regulator_bulk_set_supply_names(data->supplies,
+					bmp280_supply_names,
+					BMP280_NUM_SUPPLIES);
+
+	ret = devm_regulator_bulk_get(dev,
+				      BMP280_NUM_SUPPLIES, data->supplies);
 	if (ret) {
-		dev_err(dev, "failed to enable VDDD regulator\n");
+		dev_err(dev, "failed to get regulators\n");
 		return ret;
 	}
-	data->vdda = devm_regulator_get(dev, "vdda");
-	if (IS_ERR(data->vdda)) {
-		dev_err(dev, "failed to get VDDA regulator\n");
-		ret = PTR_ERR(data->vdda);
-		goto out_disable_vddd;
-	}
-	ret = regulator_enable(data->vdda);
+
+	ret = regulator_bulk_enable(BMP280_NUM_SUPPLIES, data->supplies);
 	if (ret) {
-		dev_err(dev, "failed to enable VDDA regulator\n");
-		goto out_disable_vddd;
+		dev_err(dev, "failed to enable regulators\n");
+		return ret;
 	}
+
 	/* Wait to make sure we started up properly */
 	usleep_range(data->start_up_time, data->start_up_time + 100);
 
@@ -1068,17 +1069,17 @@ int bmp280_common_probe(struct device *dev,
 	data->regmap = regmap;
 	ret = regmap_read(regmap, BMP280_REG_ID, &chip_id);
 	if (ret < 0)
-		goto out_disable_vdda;
+		goto out_disable_regulators;
 	if (chip_id != chip) {
 		dev_err(dev, "bad chip id: expected %x got %x\n",
 			chip, chip_id);
 		ret = -EINVAL;
-		goto out_disable_vdda;
+		goto out_disable_regulators;
 	}
 
 	ret = data->chip_info->chip_config(data);
 	if (ret < 0)
-		goto out_disable_vdda;
+		goto out_disable_regulators;
 
 	dev_set_drvdata(dev, indio_dev);
 
@@ -1092,14 +1093,14 @@ int bmp280_common_probe(struct device *dev,
 		if (ret < 0) {
 			dev_err(data->dev,
 				"failed to read calibration coefficients\n");
-			goto out_disable_vdda;
+			goto out_disable_regulators;
 		}
 	} else if (chip_id == BMP280_CHIP_ID || chip_id == BME280_CHIP_ID) {
 		ret = bmp280_read_calib(data, &data->calib.bmp280, chip_id);
 		if (ret < 0) {
 			dev_err(data->dev,
 				"failed to read calibration coefficients\n");
-			goto out_disable_vdda;
+			goto out_disable_regulators;
 		}
 	}
 
@@ -1111,7 +1112,7 @@ int bmp280_common_probe(struct device *dev,
 	if (irq > 0 || (chip_id  == BMP180_CHIP_ID)) {
 		ret = bmp085_fetch_eoc_irq(dev, name, irq, data);
 		if (ret)
-			goto out_disable_vdda;
+			goto out_disable_regulators;
 	}
 
 	/* Enable runtime PM */
@@ -1137,10 +1138,8 @@ int bmp280_common_probe(struct device *dev,
 	pm_runtime_get_sync(data->dev);
 	pm_runtime_put_noidle(data->dev);
 	pm_runtime_disable(data->dev);
-out_disable_vdda:
-	regulator_disable(data->vdda);
-out_disable_vddd:
-	regulator_disable(data->vddd);
+out_disable_regulators:
+	regulator_bulk_disable(BMP280_NUM_SUPPLIES, data->supplies);
 	return ret;
 }
 EXPORT_SYMBOL(bmp280_common_probe);
@@ -1154,8 +1153,7 @@ int bmp280_common_remove(struct device *dev)
 	pm_runtime_get_sync(data->dev);
 	pm_runtime_put_noidle(data->dev);
 	pm_runtime_disable(data->dev);
-	regulator_disable(data->vdda);
-	regulator_disable(data->vddd);
+	regulator_bulk_disable(BMP280_NUM_SUPPLIES, data->supplies);
 	return 0;
 }
 EXPORT_SYMBOL(bmp280_common_remove);
@@ -1165,12 +1163,8 @@ static int bmp280_runtime_suspend(struct device *dev)
 {
 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct bmp280_data *data = iio_priv(indio_dev);
-	int ret;
 
-	ret = regulator_disable(data->vdda);
-	if (ret)
-		return ret;
-	return regulator_disable(data->vddd);
+	return regulator_bulk_disable(BMP280_NUM_SUPPLIES, data->supplies);
 }
 
 static int bmp280_runtime_resume(struct device *dev)
@@ -1179,10 +1173,7 @@ static int bmp280_runtime_resume(struct device *dev)
 	struct bmp280_data *data = iio_priv(indio_dev);
 	int ret;
 
-	ret = regulator_enable(data->vddd);
-	if (ret)
-		return ret;
-	ret = regulator_enable(data->vdda);
+	ret = regulator_bulk_enable(BMP280_NUM_SUPPLIES, data->supplies);
 	if (ret)
 		return ret;
 	usleep_range(data->start_up_time, data->start_up_time + 100);
-- 
2.23.0