[PATCH 6/7] dt-bindings: iio: adc: max1027: Mark interrupts as optional

[Miquel Raynal]

The chips have a 'start conversion' and a 'end of conversion' pair of
pins. They can be used but this is absolutely not mandatory as regular
polling is supported by the chip depending on its internal clocking
setup.

There is no physical reason to force the use of interrupts so turn
them optional.

Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
---
 Documentation/devicetree/bindings/iio/adc/max1027-adc.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt b/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt
index e680c61dfb84..7b23d68f655c 100644
--- a/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt
@@ -3,6 +3,8 @@
 Required properties:
   - compatible: Should be "maxim,max1027" or "maxim,max1029" or "maxim,max1031"
   - reg: SPI chip select number for the device
+
+Optional properties:
   - interrupts: IRQ line for the ADC
   see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
 
-- 
2.20.1