Re: [PATCH] si2157: Add support for Logilink VG0022A.
From: Mauro Carvalho Chehab
Date: Wed Oct 02 2019 - 11:00:14 EST
Em Wed, 2 Oct 2019 16:13:59 +0200
Gon Solo <gonsolo@xxxxxxxxx> escreveu:
All patches should have a description at the beginning of the e-mail
body, even the trivial ones.
You also forgot to add your Signed-off-by.
> ---
> drivers/media/tuners/si2157.c | 68 +++++++++++++++++----------
> drivers/media/tuners/si2157_priv.h | 1 +
> drivers/media/usb/dvb-usb-v2/af9035.c | 47 ++++++++++++++++++
> 3 files changed, 90 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/media/tuners/si2157.c b/drivers/media/tuners/si2157.c
> index e87040d6eca7..8f9df2485d51 100644
> --- a/drivers/media/tuners/si2157.c
> +++ b/drivers/media/tuners/si2157.c
> @@ -66,6 +66,24 @@ static int si2157_cmd_execute(struct i2c_client *client, struct si2157_cmd *cmd)
> return ret;
> }
>
> +static int si2157_power_up(struct si2157_dev *dev, struct i2c_client *client)
> +{
> + struct si2157_cmd cmd;
> +
> + if (dev->chiptype == SI2157_CHIPTYPE_SI2146) {
> + memcpy(cmd.args, "\xc0\x05\x01\x00\x00\x0b\x00\x00\x01", 9);
> + cmd.wlen = 9;
> + } else if (dev->chiptype == SI2157_CHIPTYPE_SI2141) {
> + memcpy(cmd.args, "\xc0\x00\x0d\x0e\x00\x01\x01\x01\x01\x03", 10);
> + cmd.wlen = 10;
> + } else {
> + memcpy(cmd.args, "\xc0\x00\x0c\x00\x00\x01\x01\x01\x01\x01\x01\x02\x00\x00\x01", 15);
> + cmd.wlen = 15;
> + }
> + cmd.rlen = 1;
> + return si2157_cmd_execute(client, &cmd);
> +}
> +
> static int si2157_init(struct dvb_frontend *fe)
> {
> struct i2c_client *client = fe->tuner_priv;
> @@ -75,7 +93,7 @@ static int si2157_init(struct dvb_frontend *fe)
> struct si2157_cmd cmd;
> const struct firmware *fw;
> const char *fw_name;
> - unsigned int uitmp, chip_id;
> + unsigned int uitmp;
>
> dev_dbg(&client->dev, "\n");
>
> @@ -93,19 +111,7 @@ static int si2157_init(struct dvb_frontend *fe)
> if (uitmp == dev->if_frequency / 1000)
> goto warm;
>
> - /* power up */
> - if (dev->chiptype == SI2157_CHIPTYPE_SI2146) {
> - memcpy(cmd.args, "\xc0\x05\x01\x00\x00\x0b\x00\x00\x01", 9);
> - cmd.wlen = 9;
> - } else if (dev->chiptype == SI2157_CHIPTYPE_SI2141) {
> - memcpy(cmd.args, "\xc0\x00\x0d\x0e\x00\x01\x01\x01\x01\x03", 10);
> - cmd.wlen = 10;
> - } else {
> - memcpy(cmd.args, "\xc0\x00\x0c\x00\x00\x01\x01\x01\x01\x01\x01\x02\x00\x00\x01", 15);
> - cmd.wlen = 15;
> - }
> - cmd.rlen = 1;
> - ret = si2157_cmd_execute(client, &cmd);
> + ret = si2157_power_up(dev, client);
> if (ret)
> goto err;
Ok, you're moving the power-op code to a function. That's OK, but
the rule is one patch per functional change.
So, the first patch in this series should be the one moving the
power up code to a separate function, e. g. the e-mail would be
something like:
Subject: [PATCH 1/3] media: si2157: move power up code to a function
On some devices, we need to power up the device on other places,
so move the code to a separate function.
Signed-off-by: your name <your@email>
...
>
> @@ -118,17 +124,6 @@ static int si2157_init(struct dvb_frontend *fe)
> goto err;
> }
>
> - /* query chip revision */
> - memcpy(cmd.args, "\x02", 1);
> - cmd.wlen = 1;
> - cmd.rlen = 13;
> - ret = si2157_cmd_execute(client, &cmd);
> - if (ret)
> - goto err;
> -
> - chip_id = cmd.args[1] << 24 | cmd.args[2] << 16 | cmd.args[3] << 8 |
> - cmd.args[4] << 0;
> -
> #define SI2177_A30 ('A' << 24 | 77 << 16 | '3' << 8 | '0' << 0)
> #define SI2158_A20 ('A' << 24 | 58 << 16 | '2' << 8 | '0' << 0)
> #define SI2148_A20 ('A' << 24 | 48 << 16 | '2' << 8 | '0' << 0)
> @@ -137,7 +132,7 @@ static int si2157_init(struct dvb_frontend *fe)
> #define SI2146_A10 ('A' << 24 | 46 << 16 | '1' << 8 | '0' << 0)
> #define SI2141_A10 ('A' << 24 | 41 << 16 | '1' << 8 | '0' << 0)
>
> - switch (chip_id) {
> + switch (dev->chip_id) {
> case SI2158_A20:
> case SI2148_A20:
> fw_name = SI2158_A20_FIRMWARE;
> @@ -456,6 +451,27 @@ static int si2157_probe(struct i2c_client *client,
> memcpy(&fe->ops.tuner_ops, &si2157_ops, sizeof(struct dvb_tuner_ops));
> fe->tuner_priv = client;
>
> + ret = si2157_power_up(dev, client);
> + if (ret)
> + goto err;
> + /* query chip revision */
> + /* hack: do it here because after the si2168 gets 0101, commands will
> + * still be executed here but no result
> + */
> + memcpy(cmd.args, "\x02", 1);
> + cmd.wlen = 1;
> + cmd.rlen = 13;
> + ret = si2157_cmd_execute(client, &cmd);
> + if (ret)
> + goto err_kfree;
> + dev->chip_id = cmd.args[1] << 24 |
> + cmd.args[2] << 16 |
> + cmd.args[3] << 8 |
> + cmd.args[4] << 0;
> + dev_info(&client->dev, "found a 'Silicon Labs Si21%d-%c%c%c'\n",
> + cmd.args[2], cmd.args[1], cmd.args[3], cmd.args[4]);
> +
> +
Why the extra blank line?
The above code seems to be a separate issue and should be handled
in separate.
I suspect, however, that the issue is actually at the bridge driver.
You should probably open the I2C gate before being able to talk
with it.
> #ifdef CONFIG_MEDIA_CONTROLLER
> if (cfg->mdev) {
> dev->mdev = cfg->mdev;
> diff --git a/drivers/media/tuners/si2157_priv.h b/drivers/media/tuners/si2157_priv.h
> index 2bda903358da..9ab7c88b01b4 100644
> --- a/drivers/media/tuners/si2157_priv.h
> +++ b/drivers/media/tuners/si2157_priv.h
> @@ -28,6 +28,7 @@ struct si2157_dev {
> u8 chiptype;
> u8 if_port;
> u32 if_frequency;
> + u32 chip_id;
> struct delayed_work stat_work;
>
> #if defined(CONFIG_MEDIA_CONTROLLER)
> diff --git a/drivers/media/usb/dvb-usb-v2/af9035.c b/drivers/media/usb/dvb-usb-v2/af9035.c
> index 3afd18733614..83e243df59b9 100644
> --- a/drivers/media/usb/dvb-usb-v2/af9035.c
> +++ b/drivers/media/usb/dvb-usb-v2/af9035.c
> @@ -1246,6 +1246,51 @@ static int it930x_frontend_attach(struct dvb_usb_adapter *adap)
>
> msleep(200);
>
> + if (le16_to_cpu(d->udev->descriptor.idVendor) == USB_VID_DEXATEK) {
> +
> + ret = af9035_wr_reg_mask(d, 0xd8b7, 0x01, 0x01);
> + if (ret < 0)
> + goto err;
> +
> + /* I2C master bus 2 clock speed 300k */
> + ret = af9035_wr_reg(d, 0x00f6a7, 0x07);
> + if (ret < 0)
> + goto err;
> +
> + /* I2C master bus 1,3 clock speed 300k */
> + ret = af9035_wr_reg(d, 0x00f103, 0x07);
> + if (ret < 0)
> + goto err;
> +
> + /* set gpio11 low */
> + ret = af9035_wr_reg_mask(d, 0xd8d4, 0x01, 0x01);
> + if (ret < 0)
> + goto err;
> +
> + ret = af9035_wr_reg_mask(d, 0xd8d5, 0x01, 0x01);
> + if (ret < 0)
> + goto err;
> +
> + ret = af9035_wr_reg_mask(d, 0xd8d3, 0x01, 0x01);
> + if (ret < 0)
> + goto err;
> +
> + /* Tuner enable using gpiot2_en, gpiot2_on and gpiot2_o (reset) */
> + ret = af9035_wr_reg_mask(d, 0xd8b8, 0x01, 0x01);
> + if (ret < 0)
> + goto err;
> +
> + ret = af9035_wr_reg_mask(d, 0xd8b9, 0x01, 0x01);
> + if (ret < 0)
> + goto err;
> +
> + ret = af9035_wr_reg_mask(d, 0xd8b7, 0x00, 0x01);
> + if (ret < 0)
> + goto err;
> +
> + msleep(200);
Hmm.... you are setting bit 1 of 0xd8b7 to 0 here...
> + }
> +
> ret = af9035_wr_reg_mask(d, 0xd8b7, 0x01, 0x01);
> if (ret < 0)
> goto err;
Then setting it to 1 here.
Is this a reset pin? If so, perhaps you need to do something like:
ret = af9035_wr_reg_mask(d, 0xd8b7, 0x00, 0x01);
if (ret < 0)
goto err;
msleep(200);
ret = af9035_wr_reg_mask(d, 0xd8b7, 0x01, 0x01);
if (ret < 0)
goto err;
msleep(200);
In order to wait for the reset to finish and be able to talk with the
tuner.
> @@ -2119,6 +2164,8 @@ static const struct usb_device_id af9035_id_table[] = {
> /* IT930x devices */
> { DVB_USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9303,
> &it930x_props, "ITE 9303 Generic", NULL) },
> + { DVB_USB_DEVICE(USB_VID_DEXATEK, 0x0100,
> + &it930x_props, "Logilink VG0022A", NULL) },
> { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_TD310,
> &it930x_props, "AVerMedia TD310 DVB-T2", NULL) },
> { }
Thanks,
Mauro