Re: [Patch v2 3/3] media: ov5640: Make 2592x1944 mode only available at 15 fps

[Jacopo Mondi]

Hi Benoit,

On Wed, Oct 02, 2019 at 08:51:34AM -0500, Benoit Parrot wrote:
> The sensor data sheet clearly state that 2592x1944 only works at 15 fps
> make sure we don't try to miss configure the pll out of acceptable
> range.

The datasheet clearly indicates that 15 fps is the maximum achievable
rate with that resolution, so I guess preventing it from being set
to anything faster than that it's acceptable.
>
> Signed-off-by: Benoit Parrot <bparrot@xxxxxx>
> ---
>  drivers/media/i2c/ov5640.c | 5 +++++
>  1 file changed, 5 insertions(+)
>
> diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
> index 103a4e8f88e1..d5b0be2c7a0a 100644
> --- a/drivers/media/i2c/ov5640.c
> +++ b/drivers/media/i2c/ov5640.c
> @@ -1613,6 +1613,11 @@ ov5640_find_mode(struct ov5640_dev *sensor, enum ov5640_frame_rate fr,
>  	    !(mode->hact == 640 && mode->vact == 480))
>  		return NULL;
>
> +	/* 2592x1944 only works at 15fps */
> +	if (fr != OV5640_15_FPS &&

As long as 15 fps is the lower framerate declared in
ov5640_framerates[] this is ok, but I would make this condition a
check for "fr  > OV5640_15_FPS" so that it's safe for future
extensions.

(And I would check for the resolution first then FPS, so you check
the most unlikely condition first, but that's really a minor
optimization).

With the above small details addressed
Reviewed-by: Jacopo Mondi <jacopo@xxxxxxxxxx>

Thanks
   j

> +	    (mode->hact == 2592 && mode->vact == 1944))
> +		return NULL;
> +
>  	return mode;
>  }
>
> --
> 2.17.1
>

Attachment: signature.asc
Description: PGP signature