Re: [PATCH] ARM: dts: stm32: move ltdc pinctrl on stm32mp157a dk1 board

From: Alexandre Torgue
Date: Thu Oct 03 2019 - 06:05:26 EST


Hi Yannick

On 8/2/19 4:08 PM, Yannick Fertrà wrote:
The ltdc pinctrl must be in the display controller node and
not in the peripheral node (hdmi bridge).

Signed-off-by: Yannick Fertrà <yannick.fertre@xxxxxx>
---
arch/arm/boot/dts/stm32mp157a-dk1.dts | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts
index f3f0e37..1285cfc 100644
--- a/arch/arm/boot/dts/stm32mp157a-dk1.dts
+++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts
@@ -99,9 +99,6 @@
reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>;
interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
interrupt-parent = <&gpiog>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&ltdc_pins_a>;
- pinctrl-1 = <&ltdc_pins_sleep_a>;
status = "okay";
ports {
@@ -276,6 +273,9 @@
};
&ltdc {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&ltdc_pins_a>;
+ pinctrl-1 = <&ltdc_pins_sleep_a>;
status = "okay";
port {


Applied on stm32-next.

Thanks.
Alex