[PATCH v2 3/7] iio: adc: max1027: Reset the device at probe time

[Miquel Raynal]

All the registers are configured by the driver, let's reset the chip
at probe time, avoiding any conflict with a possible earlier
configuration.

Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
---
 drivers/iio/adc/max1027.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/iio/adc/max1027.c b/drivers/iio/adc/max1027.c
index 823223b77a70..f9b473ee6711 100644
--- a/drivers/iio/adc/max1027.c
+++ b/drivers/iio/adc/max1027.c
@@ -466,6 +466,14 @@ static int max1027_probe(struct spi_device *spi)
 		}
 	}
 
+	/* Internal reset */
+	st->reg = MAX1027_RST_REG;
+	ret = spi_write(st->spi, &st->reg, 1);
+	if (ret < 0) {
+		dev_err(&indio_dev->dev, "Failed to reset the ADC\n");
+		return ret;
+	}
+
 	/* Disable averaging */
 	st->reg = MAX1027_AVG_REG;
 	ret = spi_write(st->spi, &st->reg, 1);
-- 
2.20.1