[PATCH 1/2] net: phy: broadcom: Fix RGMII delays configuration for BCM54210E

[Florian Fainelli]

Commit 0fc9ae107669 ("net: phy: broadcom: add support for
BCM54210E") added support for BCM54210E but also unconditionally cleared
the RXC to RXD skew and the TXD to TXC skew, thus only making
PHY_INTERFACE_MODE_RGMII a possible configuration. Use
bcm54xx_config_clock_delay() which correctly sets the registers
depending on the 4 possible PHY interface values that exist for RGMII.

Fixes: 0fc9ae107669 ("net: phy: broadcom: add support for BCM54210E")
Reported-by: Manasa Mudireddy <manasa.mudireddy@xxxxxxxxxxxx>
Reported-by: Ray Jui <ray.jui@xxxxxxxxxxxx>
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
---
 drivers/net/phy/broadcom.c | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index 937d0059e8ac..5e956089bf52 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -26,18 +26,13 @@ MODULE_DESCRIPTION("Broadcom PHY driver");
 MODULE_AUTHOR("Maciej W. Rozycki");
 MODULE_LICENSE("GPL");
 
+static int bcm54xx_config_clock_delay(struct phy_device *phydev);
+
 static int bcm54210e_config_init(struct phy_device *phydev)
 {
 	int val;
 
-	val = bcm54xx_auxctl_read(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
-	val &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN;
-	val |= MII_BCM54XX_AUXCTL_MISC_WREN;
-	bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC, val);
-
-	val = bcm_phy_read_shadow(phydev, BCM54810_SHD_CLK_CTL);
-	val &= ~BCM54810_SHD_CLK_CTL_GTXCLK_EN;
-	bcm_phy_write_shadow(phydev, BCM54810_SHD_CLK_CTL, val);
+	bcm54xx_config_clock_delay(phydev);
 
 	if (phydev->dev_flags & PHY_BRCM_EN_MASTER_MODE) {
 		val = phy_read(phydev, MII_CTRL1000);
-- 
2.17.1