Re: [PATCH v2 2/3] media: cedrus: Fix H264 default reference index count

[Paul Kocialkowski]

On Thu 03 Oct 19, 23:19, Jernej Åkrabec wrote:
> Dne Äetrtek, 03. oktober 2019 ob 22:58:57 CEST je Paul Kocialkowski 
> napisal(a):
> > Hi,
> > 
> > On Thu 03 Oct 19, 22:44, Jernej Åkrabec wrote:
> > > Dne Äetrtek, 03. oktober 2019 ob 22:28:46 CEST je Paul Kocialkowski
> > > 
> > > napisal(a):
> > > > Hi,
> > > > 
> > > > On Thu 03 Oct 19, 07:16, Jernej Åkrabec wrote:
> > > > > Dne Äetrtek, 03. oktober 2019 ob 00:06:50 CEST je Paul Kocialkowski
> > > > > 
> > > > > napisal(a):
> > > > > > Hi,
> > > > > > 
> > > > > > On Wed 02 Oct 19, 21:35, Jernej Skrabec wrote:
> > > > > > > Reference index count in VE_H264_PPS should come from PPS control.
> > > > > > > However, this is not really important, because reference index
> > > > > > > count
> > > > > > > is
> > > > > > > in our case always overridden by that from slice header.
> > > > > > 
> > > > > > Thanks for the fixup!
> > > > > > 
> > > > > > Our libva userspace and v4l2-request testing tool currently don't
> > > > > > provide
> > > > > > this, but I have a pending merge request adding it for the hantro so
> > > > > > it's
> > > > > > good to go.
> > > > > 
> > > > > Actually, I think this is just cosmetic and it would work even if it
> > > > > would
> > > > > be always 0. We always override this number in SHS2 register with
> > > > > VE_H264_SHS2_NUM_REF_IDX_ACTIVE_OVRD flag and recently there was a
> > > > > patch
> > > > > merged to clarify that value in slice parameters should be the one
> > > > > that's
> > > > > set on default value if override flag is not set in bitstream:
> > > > > https://git.linuxtv.org/media_tree.git/commit/?
> > > > > id=187ef7c5c78153acdce8c8714e5918b1018c710b
> > > > > 
> > > > > Well, we could always compare default and value in slice parameters,
> > > > > but I
> > > > > really don't see the benefit of doing that extra work.
> > > > 
> > > > Thanks for the detailed explanation! So I just realized that for HEVC, I
> > > > didn't even include the default value in PPS and only went for the
> > > > per-slice value. The HEVC hardware block apparently only needs the
> > > > fields
> > > > once at slice level, and by looking at the spec, only one of the two set
> > > > of
> > > > fields will be used.
> > > > 
> > > > So perhaps we could do the same for H.264 and only have the set of
> > > > fields
> > > > once in the slice params, so that both codecs are consistent. Userspace
> > > > can
> > > > just check the flag to know whether it should put the PPS default or
> > > > slice-specific value in the slice-specific control.
> > > > 
> > > > What do you think?
> > > 
> > > I think that there would be less confusion if only value in slice params
> > > would exists. But since Philipp rather made clarification in
> > > documentation, maybe he sees benefit having both values?
> > 
> > Actually I just caught up with the discussion from thread:
> > media: uapi: h264: Add num_ref_idx_active_override_flag
> > 
> > which explains that we need to pass the default fields for hardware that
> > parses the slice header itself and we need the non-default fields and flag
> > for other cases.
> > 
> > To cover the case of hardware that does slice header parsing, I guess it
> > would also work to use the slice-specific values in place of the pps
> > default values in the hardware register for that. But it feels quite
> > confusing and a lot less straightforward than having all the fields and the
> > override flag exposed.
> 
> I wasn't aware of that patch and related discussion. Ok, so it make sense to 
> have both values. However, does it make sense to use default values in Cedrus?

Well, since the hardware exposes fields for both and the flag for H264, let's do
the straightforward thing and just pass the values through, even though we can
easily predict which will get used in the end.

For HEVC, we'll just have to check for the flag and put the right set of values
in the slice-specific register.

> > So I think I should fix HEVC support accordingly, just in case the same
> > situation arises for HEVC.
> 
> Seems reasonable. Does that mean there will be another revision of HEVC 
> patches?  If so, I think slice_segment_addr should also be included in slice 
> params, so multi-slice frames can be supported at later time.

I would be in favor of fixing this as a follow-up patch instead, so that we
don't delay getting the series in. As you said, more work will be needed anyway
for multi-slice support, so I don't see the point of holding the series for this
particular improvment.

Cheers,

Paul

> Best regards,
> Jernej 
> 
> > 
> > Cheers,
> > 
> > Paul
> > 
> > > Best regards,
> > > Jernej
> > > 
> > > > Cheers,
> > > > 
> > > > Paul
> > > > 
> > > > > Best regards,
> > > > > Jernej
> > > > > 
> > > > > > Acked-by: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxx>
> > > > > > 
> > > > > > Cheers,
> > > > > > 
> > > > > > Paul
> > > > > > 
> > > > > > > Signed-off-by: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
> > > > > > > ---
> > > > > > > 
> > > > > > >  drivers/staging/media/sunxi/cedrus/cedrus_h264.c | 8 ++------
> > > > > > >  1 file changed, 2 insertions(+), 6 deletions(-)
> > > > > > > 
> > > > > > > diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_h264.c
> > > > > > > b/drivers/staging/media/sunxi/cedrus/cedrus_h264.c index
> > > > > > > bd848146eada..4a0e69855c7f 100644
> > > > > > > --- a/drivers/staging/media/sunxi/cedrus/cedrus_h264.c
> > > > > > > +++ b/drivers/staging/media/sunxi/cedrus/cedrus_h264.c
> > > > > > > @@ -364,12 +364,8 @@ static void cedrus_set_params(struct
> > > > > > > cedrus_ctx
> > > > > > > *ctx,
> > > > > > > 
> > > > > > >  	// picture parameters
> > > > > > >  	reg = 0;
> > > > > > > 
> > > > > > > -	/*
> > > > > > > -	 * FIXME: the kernel headers are allowing the default value to
> > > > > > > -	 * be passed, but the libva doesn't give us that.
> > > > > > > -	 */
> > > > > > > -	reg |= (slice->num_ref_idx_l0_active_minus1 & 0x1f) << 10;
> > > > > > > -	reg |= (slice->num_ref_idx_l1_active_minus1 & 0x1f) << 5;
> > > > > > > +	reg |= (pps->num_ref_idx_l0_default_active_minus1 & 0x1f) << 10;
> > > > > > > +	reg |= (pps->num_ref_idx_l1_default_active_minus1 & 0x1f) << 5;
> > > > > > > 
> > > > > > >  	reg |= (pps->weighted_bipred_idc & 0x3) << 2;
> > > > > > >  	if (pps->flags & V4L2_H264_PPS_FLAG_ENTROPY_CODING_MODE)
> > > > > > >  	
> > > > > > >  		reg |= VE_H264_PPS_ENTROPY_CODING_MODE;
> 
> 
> 
> 

-- 
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com

Attachment: signature.asc
Description: PGP signature