Re: [PATCH 1/4] iio: pressure: bmp280: use bulk regulator ops
From: Jonathan Cameron
Date: Sun Oct 06 2019 - 05:49:55 EST
On Wed, 2 Oct 2019 17:57:30 +0200
Bartosz Golaszewski <brgl@xxxxxxxx> wrote:
> År., 2 paÅ 2019 o 15:06 kbuild test robot <lkp@xxxxxxxxx> napisaÅ(a):
> >
> > Hi Bartosz,
> >
> > I love your patch! Yet something to improve:
> >
> > [auto build test ERROR on iio/togreg]
> > [cannot apply to v5.4-rc1 next-20191002]
> > [if your patch is applied to the wrong git tree, please drop us a note to help
> > improve the system. BTW, we also suggest to use '--base' option to specify the
> > base tree in git format-patch, please see https://stackoverflow.com/a/37406982]
> >
> > url: https://github.com/0day-ci/linux/commits/Bartosz-Golaszewski/iio-pressure-bmp280-code-shrink/20191002-194508
> > base: https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git togreg
> > config: sh-allmodconfig (attached as .config)
> > compiler: sh4-linux-gcc (GCC) 7.4.0
> > reproduce:
> > wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
> > chmod +x ~/bin/make.cross
> > # save the attached .config to linux build tree
> > GCC_VERSION=7.4.0 make.cross ARCH=sh
> >
> > If you fix the issue, kindly add following tag
> > Reported-by: kbuild test robot <lkp@xxxxxxxxx>
> >
> > All errors (new ones prefixed by >>):
> >
> > drivers/iio/pressure/bmp280-core.c: In function 'bmp280_common_probe':
> > >> drivers/iio/pressure/bmp280-core.c:1041:2: error: implicit declaration of function 'regulator_bulk_set_supply_names'; did you mean 'regulator_bulk_register_supply_alias'? [-Werror=implicit-function-declaration]
> > regulator_bulk_set_supply_names(data->supplies,
> > ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > regulator_bulk_register_supply_alias
> > cc1: some warnings being treated as errors
> >
>
> This function has been introduced in commit d0087e72710c ("regulator:
> provide regulator_bulk_set_supply_names()") and released in v5.4-rc1
> but it's not present in this tree. In other words: a false positive.
Kind of handy to known though ;) My tree doesn't contain it yet
either. That should be fixed later this week after a pull request
and rebase. I'll not be applying this series until after that.
Thanks,
Jonathan
>
> Bart
>
> > vim +1041 drivers/iio/pressure/bmp280-core.c
> >
> > 986
> > 987 int bmp280_common_probe(struct device *dev,
> > 988 struct regmap *regmap,
> > 989 unsigned int chip,
> > 990 const char *name,
> > 991 int irq)
> > 992 {
> > 993 int ret;
> > 994 struct iio_dev *indio_dev;
> > 995 struct bmp280_data *data;
> > 996 unsigned int chip_id;
> > 997 struct gpio_desc *gpiod;
> > 998
> > 999 indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
> > 1000 if (!indio_dev)
> > 1001 return -ENOMEM;
> > 1002
> > 1003 data = iio_priv(indio_dev);
> > 1004 mutex_init(&data->lock);
> > 1005 data->dev = dev;
> > 1006
> > 1007 indio_dev->dev.parent = dev;
> > 1008 indio_dev->name = name;
> > 1009 indio_dev->channels = bmp280_channels;
> > 1010 indio_dev->info = &bmp280_info;
> > 1011 indio_dev->modes = INDIO_DIRECT_MODE;
> > 1012
> > 1013 switch (chip) {
> > 1014 case BMP180_CHIP_ID:
> > 1015 indio_dev->num_channels = 2;
> > 1016 data->chip_info = &bmp180_chip_info;
> > 1017 data->oversampling_press = ilog2(8);
> > 1018 data->oversampling_temp = ilog2(1);
> > 1019 data->start_up_time = 10000;
> > 1020 break;
> > 1021 case BMP280_CHIP_ID:
> > 1022 indio_dev->num_channels = 2;
> > 1023 data->chip_info = &bmp280_chip_info;
> > 1024 data->oversampling_press = ilog2(16);
> > 1025 data->oversampling_temp = ilog2(2);
> > 1026 data->start_up_time = 2000;
> > 1027 break;
> > 1028 case BME280_CHIP_ID:
> > 1029 indio_dev->num_channels = 3;
> > 1030 data->chip_info = &bme280_chip_info;
> > 1031 data->oversampling_press = ilog2(16);
> > 1032 data->oversampling_humid = ilog2(16);
> > 1033 data->oversampling_temp = ilog2(2);
> > 1034 data->start_up_time = 2000;
> > 1035 break;
> > 1036 default:
> > 1037 return -EINVAL;
> > 1038 }
> > 1039
> > 1040 /* Bring up regulators */
> > > 1041 regulator_bulk_set_supply_names(data->supplies,
> > 1042 bmp280_supply_names,
> > 1043 BMP280_NUM_SUPPLIES);
> > 1044
> > 1045 ret = devm_regulator_bulk_get(dev,
> > 1046 BMP280_NUM_SUPPLIES, data->supplies);
> > 1047 if (ret) {
> > 1048 dev_err(dev, "failed to get regulators\n");
> > 1049 return ret;
> > 1050 }
> > 1051
> > 1052 ret = regulator_bulk_enable(BMP280_NUM_SUPPLIES, data->supplies);
> > 1053 if (ret) {
> > 1054 dev_err(dev, "failed to enable regulators\n");
> > 1055 return ret;
> > 1056 }
> > 1057
> > 1058 /* Wait to make sure we started up properly */
> > 1059 usleep_range(data->start_up_time, data->start_up_time + 100);
> > 1060
> > 1061 /* Bring chip out of reset if there is an assigned GPIO line */
> > 1062 gpiod = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
> > 1063 /* Deassert the signal */
> > 1064 if (!IS_ERR(gpiod)) {
> > 1065 dev_info(dev, "release reset\n");
> > 1066 gpiod_set_value(gpiod, 0);
> > 1067 }
> > 1068
> > 1069 data->regmap = regmap;
> > 1070 ret = regmap_read(regmap, BMP280_REG_ID, &chip_id);
> > 1071 if (ret < 0)
> > 1072 goto out_disable_regulators;
> > 1073 if (chip_id != chip) {
> > 1074 dev_err(dev, "bad chip id: expected %x got %x\n",
> > 1075 chip, chip_id);
> > 1076 ret = -EINVAL;
> > 1077 goto out_disable_regulators;
> > 1078 }
> > 1079
> > 1080 ret = data->chip_info->chip_config(data);
> > 1081 if (ret < 0)
> > 1082 goto out_disable_regulators;
> > 1083
> > 1084 dev_set_drvdata(dev, indio_dev);
> > 1085
> > 1086 /*
> > 1087 * Some chips have calibration parameters "programmed into the devices'
> > 1088 * non-volatile memory during production". Let's read them out at probe
> > 1089 * time once. They will not change.
> > 1090 */
> > 1091 if (chip_id == BMP180_CHIP_ID) {
> > 1092 ret = bmp180_read_calib(data, &data->calib.bmp180);
> > 1093 if (ret < 0) {
> > 1094 dev_err(data->dev,
> > 1095 "failed to read calibration coefficients\n");
> > 1096 goto out_disable_regulators;
> > 1097 }
> > 1098 } else if (chip_id == BMP280_CHIP_ID || chip_id == BME280_CHIP_ID) {
> > 1099 ret = bmp280_read_calib(data, &data->calib.bmp280, chip_id);
> > 1100 if (ret < 0) {
> > 1101 dev_err(data->dev,
> > 1102 "failed to read calibration coefficients\n");
> > 1103 goto out_disable_regulators;
> > 1104 }
> > 1105 }
> > 1106
> > 1107 /*
> > 1108 * Attempt to grab an optional EOC IRQ - only the BMP085 has this
> > 1109 * however as it happens, the BMP085 shares the chip ID of BMP180
> > 1110 * so we look for an IRQ if we have that.
> > 1111 */
> > 1112 if (irq > 0 || (chip_id == BMP180_CHIP_ID)) {
> > 1113 ret = bmp085_fetch_eoc_irq(dev, name, irq, data);
> > 1114 if (ret)
> > 1115 goto out_disable_regulators;
> > 1116 }
> > 1117
> > 1118 /* Enable runtime PM */
> > 1119 pm_runtime_get_noresume(dev);
> > 1120 pm_runtime_set_active(dev);
> > 1121 pm_runtime_enable(dev);
> > 1122 /*
> > 1123 * Set autosuspend to two orders of magnitude larger than the
> > 1124 * start-up time.
> > 1125 */
> > 1126 pm_runtime_set_autosuspend_delay(dev, data->start_up_time / 10);
> > 1127 pm_runtime_use_autosuspend(dev);
> > 1128 pm_runtime_put(dev);
> > 1129
> > 1130 ret = iio_device_register(indio_dev);
> > 1131 if (ret)
> > 1132 goto out_runtime_pm_disable;
> > 1133
> > 1134
> > 1135 return 0;
> > 1136
> > 1137 out_runtime_pm_disable:
> > 1138 pm_runtime_get_sync(data->dev);
> > 1139 pm_runtime_put_noidle(data->dev);
> > 1140 pm_runtime_disable(data->dev);
> > 1141 out_disable_regulators:
> > 1142 regulator_bulk_disable(BMP280_NUM_SUPPLIES, data->supplies);
> > 1143 return ret;
> > 1144 }
> > 1145 EXPORT_SYMBOL(bmp280_common_probe);
> > 1146
> >
> > ---
> > 0-DAY kernel test infrastructure Open Source Technology Center
> > https://lists.01.org/pipermail/kbuild-all Intel Corporation